31 models
KlackEnderPro2 A modified version of the KlackEnder project to work with an Ender Pro 2. Its a remix from daaar on Thingiverse.com There weren't step files included so I had to modify some of the models creatively. Tolerances are between…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
this is the klackender ender 3 self leveling probe designed by kevinAkaSam modified to use only m3 hardware
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
KlackEnder Probe Rev2.1 KlackEnder Probe - Simple, fast and cheap! What is this about? Adaptation of the Klicky / Quickdraw Probe for the Ender 3 and comparable Creality printers. The probe is compatible with all printers that use the X…
I recently installed the awesome KlackEnder mod on my Ender 3 V2. The stock dock and mount needed to be revised to work with the different size tabs that are on the Micro Swiss NG backplate. The original probe block and retainer are fine.…
I consider this a rough draft, but it is a working install. Still need to fine tune things. Files remixed to fit the left side location of the factory induction probe. The probe dock was modified to fit the botton lug of the X gantry and…
Why KlackEnder for the Neptune 4? I got really annoyed by the temperature-shifts by the original inductive probe. When I heated my bed to 110°C for ASA and the printer homed, the z-offset got messed up, so I wanted something else: a…
Looks like the hot end mounting plate changed on the Ender Pro. One hole was moved 1mm to the right and the x rail extrusion hit the bevel of the original design so I removed some material.
This is a very simple remix of igalopakas design ( https://www.thingiverse.com/thing:4614384 ). The change is that it is updated to allow the Stealthburner with CW1 to be mounted to the Ender 3 v2 (may work with others that use the same…
The KlackEnder probe adapted for the Neptune 2. You'll lose a few mm's on your X axis using this probe with the regular Elegoo X axis plate. You can change the X axis plate to an Ender 3 one for 3 bucks to fix this but then you have to…
For usage and configuration I recommend checking the official KlackEnder website KlackEnder – Simple, fast and cheap! – KevinAkaSam's Sandbox and maybe watch videos on how it works and how good it is (it is good) . Awesome user biering…
Original design: KlackEnder Probe by KevinAkaSam | Download free STL model | Printables.com When building the probe for my own printer, I discovered that my magnets were a different height than the nominal in the design. I modified the…
Tolerances from KevinAkaSam klack ender is v0.15 h2.0 on this model. Parameters to fit with Micro Swiss DD. This is a remix of KevinAkaSams Klackender Probe that i modified to fit a specific printhead. All tolerances and instructions can…
Here's a mount for the KlackEnder probe Rev 2 by kevinakasam https://github.com/kevinakasam/KlackEnder-Probe Print with supports and pretty strong (many perimeters and high infill). Options provided for MK8 style or V6 style hotends. For…
no pictures of it working as its deployed in a no photos area (BOM at the bottom) I remixed and added a few parts like a holder for the mg90 servo and an arm to hold the klackender probe as well as making some adjustments to the holder…
Please see the original model for description regarding the Stealthburner mount. As for the Klackender probe and how to use it, you can find all the instructions here: https://www.printables.com/model/332025-klackender-probe I can not add…
Allows for usage of KlackEnder, no other modification required to other STLs. Offset is the same. Cables need to be fed from the “top”, might require usage of tweezers, but it is possible. I made the holes for .15 variant. Either modify…
Remix of the KlackEnder/Klicky probe carriage to restore the 12H screw pattern. Still kinda messy in the spots where I moved the top holes since I was working off the stl mesh, but prints fine and fits the robotdigg 12H carriage I'm using.
The ToupTek AFW filter wheel has screw holes either side to attach tilt plate and OAG via screws. If your using the M54 adaptors to attach to telescope and camera (rather than the screws), then the screw holes are not covered and could…
Make longer probe mount and some changes in dock. Probe block has original size, i only changed the shape of the eyes
My own design for Ender 3 Pro with Klipper. I use KLACKENDER as Z probe and bed mesh. -Direct drive extruder with BMG & E3D V6 combo, NEMA17 Pancake is enough for high speed printing. -Volcano hotend can be used but duct need modifying…
Remixed kevinakasam's klackender to work with the MicroSwiss NG Revo DD for the ender 3 v2. The probe dock magnet and screw positions had to be adjusted for the lower revo nozzle. The probe mount had to be adjusted to fit the microswiss…
A tiny remix of the probe mount to fix snugly onto an x-axis plate from the Sprite Extruder Pro Kit which has a weird narrow right side, as well as a bit thinner. Tolerance: v0.15 h0.2 Second image is taken from creality3dofficial.com
This is my personal take on the Lack 3D Printer Enclosure, it is constantly evolving but at present is a MK3 MMUv2 enclosure on top and MK2.5 on the bottom. From an initial idea of the cabinet I have faced some hurdles that I have…
I got a max neo, and the original parts do not fit the X gantry, and it would engage when using the max bedplate width so I remixed the parts to make it work. I also stole some design ideas from the V2.2.2Beta, so that I did not have to…
THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929 Designed to mount IR Raspberry Pi Cam…
I couldn't find a volcano adapter for the Micro Swiss NG KlackEnder, so I made one. This was my first foray into FreeCAD, so the models are aesthetically sloppy, but they are functional and I don't feel like cleaning it up. Feel free to…
A modified mount for the Ender 2 Pro carriage.
An incredibly basic mod of the stock Klackender 2.2 beta dock to make it work with the Micro Swiss NG dock for 2.1's hotend mount . The 2.1 mount works fine with the rest of 2.2, the big changes are to the probe block and the dock. The…
PCB Klicky information - https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky KlackEnder information - https://kevinakasam.com/klack-bom/ Recommended by KevinAkaSam to print in PETG or ABS and not in PLA. The macros for…
The ToupTek AFW filter wheel has screw holes either side to attach tilt plate and OAG via screws. If your using the M54 adaptors to attach to telescope and camera (rather than the screws), then the screw holes are not covered and could…
Please see the original model for description regarding the Stealthburner mount. As for the Klackender probe and how to use it, you can find all the instructions here: https://www.printables.com/model/332025-klackender-probe I can not add…
