1 / 2
KlackEnder Ender 3 v2 Microswiss NG Revo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
KlackEnder modified probe mount and dock for the Ender 3 v2 Microswiss NG Revo DD
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v3.0
Remixed kevinakasam's klackender to work with the MicroSwiss NG Revo DD for the ender 3 v2.
- The probe dock magnet and screw positions had to be adjusted for the lower revo nozzle.
- The probe mount had to be adjusted to fit the microswiss carriage and made to sit a little lower so the revo nozzle doesnt hit the bed.
Used the latest STL's and CAD from his github page.
Adjustments for the Revo variant
[probe]
pin: ^PA7
z_offset: 3 #Measure per your specific setup. Klipper will NOT save this value if this in not located in printer.cfg
x_offset: 6.5 # negative = left of the nozzle
y_offset: 31 # negative = in front of of the nozzle
speed: 5.0
lift_speed: 15.0
sample_retract_dist: 1
samples: 2
samples_tolerance_retries: 6[gcode_macro PROBE_CALIBRATE]
rename_existing: _PROBE_CALIBRATE
gcode:
{% if not 'xyz' in printer.toolhead.homed_axes %}
G28
{% endif %}
PROBE_OUT
G90
G1 Z20
G1 X111 Y86.5 F12000 ; Readjust for center of bed adjusted for probe offset
_PROBE_CALIBRATE
TESTZ Z=20
M117 Remove the Klack to continue calibration![gcode_macro PROBE_ACCURACY]
rename_existing: _PROBE_ACCURACY
gcode:
{% if not 'xyz' in printer.toolhead.homed_axes %}
G28
{% endif %}
PROBE_OUT
G90
G1 X111 Y86.5 F12000 ; Readjust for center of bed adjusted for probe offset
_PROBE_ACCURACY
PROBE_IN