1,996 models
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
After the first attempt I made this one louder and easyer to print.
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Here is the original part : https://www.thingiverse.com/thing:3888958 Enjoy!
Print approx. €4.09–€4.99 excl. taxPreliminary estimate for PETGSource material: PET
parts size adjusted for easier storage
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the original Balancing Acrobats , this redesign takes the challenge to a whole new level. While the original focused on vertical stacking, this version introduces wild, multidirectional chaos. The unique geometry allows you to…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
The object of this game is to build the tallest tower by fitting the elephants and the balls together without letting them fall HAVE FUN! Printing tips: PLA, 20% infill , 0,25mm layer height
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
Bigger base for more fun Pack of 21 tetris cube shapes New tetris cube shapes for off-axis play Bigger base optimized for Prusa MINI (90% scale) More shapes, more fun
Print approx. €2.35–€2.88 excl. taxPreliminary estimate for one variant
Caja para Balance Tetris
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Intro Keystone is a calm but surprisingly challenging balancing game for two players. Build a wall from small, asymmetric stones — each piece is different, every round plays out differently, and every move matters. You can play together…
Print approx. €9.85–€12.04 excl. taxPreliminary estimate for one variant
Ein Halter für das Laufrad der Kinder
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
DE: Einfaches Ersatzteil für ältere Blanco Select Müllsysteme mit Soft-Close Funktion. Die Stützstrukturen an den Ecken sind in diesem Fall sinnvoll um ein besser Passform zu ermöglichen. Als Material empfehle ich PETG um vorzeitigem…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Background I've been using automotive axle/chassis stands to balance my motorbike wheels (with the axle simply resting on two stands). I thought I'd design a cradle that sat on top of my (SuperCheap Auto) axle/chassis stands that would…
Print approx. €6.24–€7.63 excl. taxPreliminary estimate for PETGSource material: PET
I adjusted the print settings to achieve a mass of 3 grams, in order to match the mass of my golf-club weights.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
The children really love all the small animal figurines for this game so why not one more! This balancing bear tips over at just the right slant of the game board. Please enjoy!
Print approx. €2.51–€3.06 excl. taxPreliminary estimate for one variant
This print is a replacement for the lance holder on a Kärcher K7 pressure washer. The holder is designed to slide in and snap to the mounting holes for the lance holder. I printed this part in PETG with supports for the mounting hooks.…
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for PETGSource material: PET
Save yourself some meters of precious filament by using this base for the Prusa Balance Game - simply insert this cork in an empty bottle! Enjoy playing 🙂 I used PLA, 0.2mm layer hight, 15% infill and no supports. Print it in the upright…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Perfectly balanced, almost like it's floating in the air, showing off your glasses, ready to grab your attention at the slightest movement. (If the surface on which the holder is placed moves, the glasses will wobble.) Printed in PLA with…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
About this model: This oversized Planchette coaster was inspired by Halloween, astral-themes, and takes the classic “Ouija” spirit board tool to become a decoration for the home around Halloween, or whenever! Size: can accommodate a wide…
Print approx. €2.72–€3.33 excl. taxPreliminary estimate for one variant
This is a replacement valance clip for 2.5" blinds. I'm not sure of the brand of blinds, but if your clip looks like this one and the blinds are 2.5", it may work for you. The model prints well in draft mode (0.30mm) without any supports.…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
After creating my “game spinner” to allow selection of 1-12 (just like using a pair of dice). I revised it further to be used with the Prusa Balance Game (available here on printables). This is an easy print - If you use the printed…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Description The game challenges players to stack dice to form a tower, offering fun for both children and adults. 21 (or more if you print more for harder challenge) dice are evenly distributed, and players take turns rolling no more than…
Print approx. €8.37–€10.23 excl. taxPreliminary estimate for one variant
16.09.24 Updated the Top Part so it got it a bit more clearance. It Now opens and closes much smoother This model is for the 50% Version! However it shouldnt be a Problem to Print at 200% for the normal sized one! Made sure the 200%…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Number Scale to provide preschool and elementary school children with a basic understanding of quantities and simple equations. "Easy and quick to print. Requires minimal support. You should print the base on its side to ensure the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Hello, Today I have Balance Block Stacking for Kids for you . The game can be played in several ways: - Play until someone drops one or more cubes - Play until the base turns over and all the cubes fall - Just stack until the cubes run…
Print approx. €6.64–€8.11 excl. taxPreliminary estimate for one variant
Check your local rules to see if balancing can be done, or if there are restrictions on how to balance (such as adding or removing mass). The fixture will require the following additional hardware: Qty 2 - M5 hex nut 16mm or longer M5…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Pirate Parrot Pyramid: Take turns stackin' yer parrots on the Captain. Pile 'em high on his hat, his hook, and his sword. But have a care! One slip of the hand, and the whole flock goes tumblin' into the brine! Download the .ZIP file for…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Warm enclosure helps - I feel like the colder the room, the worse cubes warp.
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
For best result printed with variable height, and switched color between base plate and trail.
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
Tested on 0.15mm 50% infill. maybe lesser infill will do. failed on 5% gcode file is for color change effect so you don't have to paint it and it should last forever I also included the fusion 360 file. Maybe you will like to use it in…
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for one variant
This model of a simple balancing scale was created to be used as a teaching aid in an “unplugged” activity regarding sorting algorithms. The material might be used in computer science or maths classes to give students the opportunity to…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Some plancha (like my Forge-Adour) use the front to eject liquid, like grease. But if you want to keep liquids as per when you cook some “Ratatouille”, you need to adjust the front feet so the liquids remain at the back of the plancha.…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
Decided to make this to reduce the chances of screws coming loose and flying around the 280ah diy house batteries in my skoolie. yes the balancer is potted but can never be too safe, right? initial print is 2 sidewalls, 2 top and 2 bottom…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This model helps prevent accidental operation of the light switch when the lamps are controlled by motion detectors, for example. Fits for BuschJäger (BuschJaeger) Balance SI Series Dieses Modell hilft eine versehentliche Bedienung des…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Could not find these anywhere online so I modeled one up.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
This model replaces the switch rocker of the BuschJaeger Balance SI series and allows the use of a Hue Button instead. A small magnet (ø = 15 mm, height = 1,6 mm) is inserted on the back so that the Hue Button holds magnetically. Due to…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Support adapté pour planches à découper pas plus 2 planches sur ce support; diamètre vis 3.5
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
This is a replacement cap for the rear wheel bolt of a Louis Garneau F-UN balance bike. You can show off your style by printing it in fun colours! You can see this model (yellow) compared to an original (black) in the photos. Update…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Alternative set of hollow pieces for HedronStack balancing game. You can see through them, if you print with transparent filament, you may be able to see through the sides partially as well. You can either replace original pieces with the…
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for one variant
Ist leichter zu drehen als das Original und durch den besseren Sitz der Schraube langlebiger. Bei uns seit Monaten ohne Probleme im Einsatz. Viel Spaß damit!
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
Replacement clip for mini blind valance. Best to print this out in PETG for the added flexability. 100% infill recommended due to size of part.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Simple credit card sized slate for white balance in underwater photography. Should obviously be printed in white saltwater resistant filament. I printed it in PETG as no ASA or similar at hand.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
SideSilhouette of a 1991 lancia delta EVO. On request I can also send the basic image to make changes, or if minimal, I can make them myself on request.
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
You may chose between 2 characters ( Jo Prusa and Baby Dragon ). All models are designed to be suportless so you dont need them for succesful print.
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- News: 12/15/2023: “ Testris_TS_… ” is a travel size version at 50% of the original size. NOT TESTED. Please let me…
Juega el Tetris en la vida real, esta vez evitando perder el equilibrio
This is a stacking game where players carefully place complex 3D pieces onto a growing structure, judging alignment, weight distribution and stability. While the goal is to build higher than your opponents, pushing the structure too far…
For single player this simple balancing game has one main goal… see how many dinos you can stack on the wobbly base. With two players you will need two of each dinosaurs printed. Each player will start with 10 dinosaur pieces. Then one…
partage d'un ficher payer imprimable en PLA ou resine, support obligatoire
I found this great game of Tetris to play with the grandkids. printed it and loved it. I printed 6 sets of pieces which is plenty. I designed a box to put it all in. You don't have to print it in colors, but if you have a BambuLab or…
I made a very simple box/case for the game with integrated stand. The existing game board will act as the case cap/lid without any modification requirements. There is enough space between the game board and the box to pick the figures out…
If you like my model, you can reward me by purchasing it on Cults3D at the link below: https://cults3d.com/en/3d-model/game/balancing-hat-only-40-minutes-print
This is an improvement on the rather popular "Floating Cup (smoother look, foolproof assembly)", https://www.printables.com/model/164778-floating-cup-smoother-look-foolproof-assembly . See that model for some notes and directions of how…
Just quick remix. Scaled down to 85 percent of original. To spice things up a little use different colors in layers while slicing (M600 command or pause-change filament-resume). Print 4 pieces of every tetris-piece, it will fit easily…
This is my “Ultimate” version of this game, with quite a few new play possibilities to make it even more fun. Hope you will enjoy it, and please let me know if you've ideas to improve it, I'll design the parts. Please note that I won't…
Little acrobats balancing and stacking game. Printing with more infill will result in heavier acrobats that are easier to stack. Acrobats available with and without smiling face. Can be scaled down for a mini desktop stacking game. Have…
Print each furniture piece at least 4 times . Use any colors you like for better visibility and fun. How to Play Place one piece as a base. Stack furniture pieces on top of each other to create a balanced structure. Same-type elements…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
A Detailed Parts List can be found in the description of the YouTube Video below: This robot does not require any supports to be printed. Designed by Kelton Serra (Build Some Stuff) in Fusion360.
Hi, I created a balancing game with a figure, you stack them on top of each other in the shape of a pyramid, whoever falls down loses. It also comes with a nice box that can hold about 80 figures. Enjoy
Hello, the original author of the model has contacted us to check your remix as it does not meet the license conditions or is not a transformative remix of the original. Since your remix violates the license and rules of the original…
Update 26.05.2024: Added version for 4-color multicolor print (AMS & MMU). Summary This is a model of a Mitsubishi Evo 4 (Lancer Evolution IV) in a kit / gift card style. Some characteristic details can be discovered. Equipped with…
This is a fun and challenging balance Tetris game. The game is simple to play: simply print as many sets of pieces as you need (I printed 1 set per player, but 2 sets work great). Every palyer get one pieces of each type. The first player…
This is my design for self leveling / gyro cup or a MUG holder. You can install on adult walking aid, baby stroller handlebars for bicycles. I was inspired from the design…
Picture this: You're an experienced chess player who has hit a plateau at 500 elo. You feel stuck and bored with traditional chess. Then you think, what if I made chess even harder? Well do I have the game for you! Balance Chess…
Introducing the FDM (Fixum Dude Motors) print in place ambulance. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Update 25-Nov-2025 Tree and Latches updated to R4. Added internal feature to the Tree to increase strength. Thanks to Slant3D for the idea. 23-Jan-2024 Uploaded game pieces with a round base. Original hex base game pieces will also fit .…
Self-balancing bat, print in place and optionally glue the teeth on (as far forward as possible); have also uploaded a single tooth if you would like the bat to spin. Also included a version with a hole to hang the bat, should balance on…
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
LANCE OF LONGINUS IN EVANGELION Category: Toy & Game Accessories
Toolbox/casing for the Tetris Balance game, with or without colors The ‘balance’ have a reserved emplacement in the toolbox lid, it stays in place as it is a tight fit and 3 clips retains it. The tray that holds pieces is removable to…
This small santa hat has a special trick: it balances! Printing Instructions (Standard): I recommend PLA with 0.2mm layer height, 5-10% infill, 2-3 walls, and no supports! Print as oriented. I printed in matte white PLA and colored the…
The Avro Lancaster was a heavy bomber aircraft used primarily by the Royal and Canadian Air Forces during the Second World War and saw extensive use with over 7000 being constructed. In its versatility it would carry some exotic ordinance…
Compared to original, it has adjusted scale to 150 mm wide base, letters are set in 0,25 mm deep (first layer) and it has added chamfer 1 mm on the all edges.
https://www.printables.com/model/633194-pru https://www.printables.com/model/669446-prusa-balance-game-collapsable/files https://www.printables.com/model/667011-prusa-balance-game-accessories-box-and-two-piece-s I have included: The…
Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
Simple and easy to print without supports Balancing Game Choose your color and enjoy!
Dinosaur Stack is a fun and creative 3D printed game that focuses on balance, patience, and skill. The goal of the game is simple: stack the dinosaur figures on top of each other without making the tower fall. Each dinosaur has a…
I have printed this holder with PETG and it's been working great for months now. Every file is to be printed once, with the exception of the spacers , which you will need 4. Apart from the printed files, you will also need: For the cup…
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Saw this in an advert somewhere and thought it'd be a fun little project! Pretty easy to print and the game is self explanatory (whoever tumbles the pile first loses). The original also has cards that tell you what piece to play to make…
Place as much piranhas to the base as you can. Try it by one hand only. Share your best result with friends :)
Storm Trooper: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a…
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
The Prusa balance game is a great model and a source of much fun. However, it lacks: a box to contain all the parts, and a two-piece base for easy disassembly and storage in the box. This remix addresses both issues. The connector between…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was designed by Dany Sánchez . After living in Casablanca for 2 years, Dany said farewell with this grand model of the Mosque Hassan II, landmark of Casablanca and one of the largest…
It's Swing-Wing Saturday Muh dudes! and so I present this beauty, which has been a long time in the works. In addition to this, Swing Wing Saturday will be once a month. As the name suggests, the kit card will have a variable sweep wing,…
A simple mechanical calculator powered by gravity and trigonometry! Either when teaching a child to do basic addition and subtraction, or when explaining more complex concepts to a physics class, like center of mass and mechanical…
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
Rescaled a popular gnome figure and placed on a hex tile to be used with Prusa Balance game. Original gnome: https://www.printables.com/model/178691-gnome-christmas-tree/ If you need some matching hex baskets to catch and store your…
Short and fun balance game. For two or three players. Roll a dice and see what object you need to put on the unstable base. The one who fails to put the object on the base and keep it stable lose. The youngest player decides who starts.…
J'invoque le tous puissant dragon blanc aux yeux bleu !!! <(^^)>
This is the Yeetlance: a shell-ejecting, breech-loading, single-shot, half-length dart blaster. Practical? No. Competitive? No. Fun? Oh absolutely. Update 2024-01-20 p2: Added missing O-Ring for bolt plug seal to BOM. Update 2024-01-20:…
Introducing the Lancehorn from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
My daughter asked for a Barbie Gymnastics set from Target for her birthday. After purchasing the one she wanted ( https://www.target.com/p/barbie-174-careers-gymnastic-coach-dolls-playset/-/A-52607245#lnk=sametab ) and realizing how…
The LOVE Balance Sculpture is a modern decorative piece that blends minimalist design with pure emotion. 3D printed with a matte red finish, it transforms the word “LOVE” into a balanced three-dimensional structure full of movement and…
This is a remix to address some issues I had with the original design. Printing info: PLA 0.4mm nozzle 0.20mm layer height 15% infill [UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted.…
