1,661 models
⚠ PLEASE DOWNLOAD THE MANUAL AND READ IT BEFORE USE ⚠ Print Keep Squire is a beginner-friendly, front-loaded single-shot foam-dart blaster, designed for those eager to venture into the exciting world of 3D-printed blasters! Its my first…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Star Wars E11 Blaster Rifle The BlasTech Industries E-11 blaster rifle , also referred to as the E-11 BlasTech Standard Imperial Sidearm , [3] the Stormtrooper Armament Blaster Rifle (BlasTech E-11) , [4] and the E-11 Military Issue…
Print approx. €20.58–€25.15 excl. taxPreliminary estimate for one variant
MEGA MAN Blaster Simply print and glue the parts of the blaster together. Scale the blaster however you like :) Print-files for 0.4 or 0.6 Nozzles Assembly: First, the lens is glued into the front part (body front). The small guide ring…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
DL-44 Han Solo's Blaster (UPDATED 1/17/2024) the .ojb file is not to scale. Use this if you plan on scaling gun for a child or such. The .3mf file has been updated so it is to movie scale. and the sliced file with organic supports is also…
Print approx. €29.72–€36.33 excl. taxPreliminary estimate for one variant
Attention Nerf enthusiasts! Are you looking to take your Nerf blaster game to the next level? Boost your accuracy and aim with the 3D Printable Sight/Optic for Nerf Blasters . This sleek and functional accessory is designed to help you…
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant
Self Drilling Plasterboard Wall Plug no supports are required. It only requires 23 minutes to print and could avoid a trip to the hardware store ... Wall_Plug.stl <- is for small screws Wall_Plug_v2.stl <- si for bigger screws First try…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Description The is a model of the blaster used by the Character Korben Dallas, played by Bruce Willis, in the classic movie The Fifth Element. Modeled after a prop. Print instructions Print with your prefered settings, don't forget to add…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
This is a adjustable dart blaster sight! It is compatible with picatinny rails as well as nerf rails with an adapter. I did not design an adapter myself but there are a ton on Thingiverse that are available for free. Here are the…
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
This is a single-use mold, once printed it must be filled with plaster and left to dry. After 24 hours it must be placed in the microwave every 30 seconds to soften the plastic and remove it. Once ready the pieces fit together perfectly…
Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.12-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €7.00–€8.55 excl. taxPreliminary estimate for one variant
Hole in the cardboard/plasterboard must be from 7.8 to 8.1 mm max.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
My home as several Mortise-Mount Pilaster style built-in bookshelves and I thought it might be fun to try to design the support clips as my first TinkerCAD project. The model is based on these 239 Series Steel Shelf Clips manufactured by…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Remix to split the stand in 2 parts and to add a color change because "This is the way".
Print approx. €0.41–€0.51 excl. taxPreliminary estimate for one variant
A mod kit for the TF2 pistol by methanejuice. Please rate, like, and download so I can get free filament and keep making models. Adds: Picatinny rail on the blaster prime, a larger tip, sight, and a larger mag. Aravage Range: 196.55in…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET
This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The book describes the blaster pistol with a triangular barrel that fires energy and…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This Simple (smooth) Version is easier to assemble and print. This is my interpretation of the Energy Blaster or Energy Pistol used by Alexia Harmon in the final battle from the book "The Defender" by Larissa Soehn. The book describes the…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
This was a project I did for my neighbour's kid who had the handle (fore-end) of his nerf blaster-like toy. This fixed it and actually made it much better than the original was! I've included everything that I used including the .obj…
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant
Mit dem M30 Kurzbolzenadapter können Sie formschöne T-Stoß-Übergänge von runden Querschnitten auf M30 Gewinde machen!
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
The Compliant Mechanisms Research Lab has worked with Mark Rober and his team to create the world's smallest functional Nerf blaster. Watch his video here ! EDIT 10/16/2023: The ¼-scale files have been updated to a version that latches…
I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…
The Orbit Revolver is my fully functional toy blaster designed to be satisfying to handle and as accessible as possible. It is currently my favorite printed model across all my years of 3D printing. I would recommend watching the YouTube…
The Breacher is a 3d printed Nerf tube-magazine shotgun blaster that fires and ejects Silly Shells! It's spring powered, with a pump action prime. Yes, it actually fires multiple darts at once! READ THE "Print Info" SECTION of this…
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
“What are Silly Shells?”: Silly Shells are an ecosystem of 3D printed shotgun shells for homemade Nerf-style blasters! There are many, many different shells to use in each blaster, allowing one blaster to fire a wide variety of ammo types…
The SLAB: Silly's Lever Action Blaster. A Talon-fed half-dart lever-action springer. Firing demo: General blaster overview video Firing demo video The SLAB is a lever action, Talon mag fed, half dart springer. Sellers A full list of US…
The Gryphon is a mostly 3D printable, hobby-grade, Nerf semi-automatic flywheel blaster. Its main design features are as follows: Uses 130 to 180 sized 20.4mm , brushed DC motors. Semi-auto by rack and pinion with 1:3 gear multiplication.…
Looking at all the Dummy 13 addons available made me feel like a kid picking out cool new parts for a LEGO Hero Factory set as a kid, so I wanted to add to the mix one of my favorite parts of those sets - HUGE ARM CANNONS! Megaman,…
Cynthia is a bolt action Nerf blaster that uses half dart Talon magazines! Firing Demo: Blaster Overview: https://youtu.be/mIW0dAyOCv0 Customization Overview: https://www.youtube.com/watch?v=mZe6dWdQUs0 Assembly Video:…
UPDATE 8/17/2023: Updated Build Guide from v0.1 to v0.2. This includes more information and links in the electronics and internals section of the Parts List, more specifically adding the specific battery needed to fit inside of this…
The original version can be found here . This version changes some proportions and adds a few details to be closer to reference material from the show. This version uses printable pins for part alignment. The smaller pin is used for the…
INTRO I'm beyond excited to introduce you to SMILEY, the result of months of hard work to create the best bolt-action Nerf blaster this hobby has ever seen!! SMILEY is a collaboration project with renowned hobby designer MrHeathPants to…
DC17 Blaster Pistol. Model is sliced into 3 parts for easy printing! For personal use only!
YOU WILL NEED THE KIT TO BUILD THIS: USA: Bearswares: https://bearswares.shop/products/vulture-mk3-by-mhp-arms?variant=42951208534129 Out of Darts: https://outofdarts.com/products/mhp-vulture-lever-action-springer-hardware-kit AUS:…
I am going to preface this by saying that I am not putting together a full build guide, this is literally just all the parts I altered, this was literally a personal project that I decided to share because of the feedback I received. You…
Battle Axe is a 3d printed Nerf shotgun blaster that fires and ejects Silly Shells! Spring powered, pump action prime. Yes, it actually fires multiple darts at once! Changelog is at the bottom of the description text. Most recent update:…
Alchemist is the next step in the evolution of 3d printed pump action springers. Alchemist is built like a tank, has a butter smooth priming and firing feel, and is customizable with many alternative parts and upgrades! MAKE SURE to…
Here I have my model of the ROTJ variation of the well known E-11 Blaster. I designed this after having difficulty with other models where the assembly was quite challenging and messy. All the parts have been divided into separate plates…
Foxbat is GIANT handcannon Nerf pistol, which uses Talon or Angled Talon half-dart magazines, loaded through the grip! Blaster Overview: Firing Demo: READ THE "Print Info" SECTION of this description page before printing the blaster!…
Build Guide Bill of Materials FAQ Open Beta Fileset (not all components complete) Buy hardware or printed parts at SilverFoxIndustries A spiritual successor to the Gryphon, though not a replacement. Leaning further to the direction of…
Star Lord's Quad Blasters from Guardians of the Galaxy. My own work based on movie props photos as accurate as I could. Dimensions are about movie size, fits into L hands (about average men's hand). Star Lord uses two blasters - don't…
Changelog: 11/03/2025 - Fixed priming bars missing from part drawings pdf. Changelog: 02/21/2026 - Added hw kit suppliers for asia What is this? The Stagecoach Side By Side is a 3D printed nerf blaster that fires and ejects Sillyshells ,…
Thank you for checking out my page! If you’d like to support my work, consider subscribing . As a member, you'll gain access to **all my designs** along with **commercial rights** to sell physical prints of them for as long as your…
BUILD GUIDE INTRO Remember your promise in a most rootin' tootin' fashion 🤠 Presenting Sidetrack, a break-action hammer-prime revolver! Heavily remixed from the Hammerhead by Leedle Dynamics, the Sidetrack achieves higher performance and…
Reconfigure your Nerf Pro Torrent! [Scroll to the bottom for updated parts and changelogs] I am a big fan of the Nerf Pro Torrent; but know that it may not be to everyone’s liking. I am incredibly excited to introduce my latest project -…
The MHP Vulture is a lever-action short dart spring-powered blaster remixed from MrHeathPants’ own Wrenfield MK-3 blaster design. Featuring a premium CNC-milled, black anodized aluminum lever and priming bars along with a unique…
Big-Iron is a hammer primed nerf revolver, with swappable six shot cylinders. Before starting this build, i recommend reading the PDF file with the build guide and hardware list first. There are a few tricky steps in the assembly, so its…
LYNX DIY Blaster - EU Edition HINWEIS! Bitte druckt diesen Blaster recht Farbenfroh, so dass er sich stark von echten Waffen unterscheidet. Nachdem ich bereits vor ein paar Wochen meine EU Version des CALIBURN 4 Blasters veröffentlicht…
Excalibur is a pump-action blaster with plenty of power, quick spring swapping, and the ability to swap between full length darts or half length darts on the go!…
Finally sharing my first ever designed-from-scratch dart blaster! This one is a stringer, modeled after a medieval crossbow. It is optimized for Nerf Ultra darts (I like them for stringers since the harder foam doesn't get damaged as…
This model is compatible with the lego system.
UPDATE 12/6/24: HW kits and completed blasters now available through GTCCreation . UPDATE 2/25/24: Updated flywheel cage with tighter motor slots (thanks to Chance for the dimensions) to improve dart accuracy and reduce barrel strikes.…
What is Flycore? · Flycore is a 90% complete blaster awaiting your new shell, design, or integration! I’ve done all the work on flywheel spacing, pusher mechanisms, and even a complete magwell with detent or release! · The goal of Flycore…
God, I just need to release these. I'll keep iterating on them forever and never get them out there otherwise. THE NEW AND IMPROVED BLASTER ARMS ARE HERE! READ THIS: ALL of these guns are designed to be printed vertically; I personally…
My first multi part prop print on my Mini+. I used a base coat of Testors color shift paint after the primer coat, after that I polished with graphite powder for a metallic sheen.
This is a 3D model of the LEGO Star Wars Blaster #57899 in minifig scale. I'm currently working on a human sized version similar to this design which is split into multiple parts small enough so they can be fitted on most of the common…
I took down lanka on etsy due to being just a bit too outdated and the new terms of service on etsy no longer allowing me to have more realistic shapes, so i decided to throw it on here.
reuploaded because the other link broke.
This is a simple box for blister plasters from Compeed or other manufacturers. The hinge is designed to get a piece of 1.75mm filament to hold the box and the lid together. Print it with your default settings for your filament type you're…
What is Flycore? Flycore is a 90% complete blaster awaiting your new shell, design, or integration! I’ve done all the work on flywheel spacing, pusher mechanisms, and even a complete magwell with detent or release! The goal of Flycore is…
Tried printing a few quad-blasters, but decided to design my own so they print nicer. print/paint in the colours as per the file names - print in the orientation they are in just slice and print. THERE ARE 2 “BLACK 1,2 & 3” PIECES - BLACK…
HBM-23 is a belt-fed blaster that offers a high rate of fire for an extended period of time. This is my first design, so keep that in mind if all features are not ironed out completely! I've included different parts for you to customize…
Give yourself a couple of nights off, break a leg. Stool is 20% scale of https://www.printables.com/model/168889-mammut-stool-ikea by hesam. Plaster cast needs to be scaled to about 97% for elves without feet.
Rigips/plasterboard dowels, 2 variants, with PZ2 or PH2/PD2 bit. Must pre-drill with Ø6 or Ø6.5mm drill! Printing from PETG or Nylon or strong, extra PLA variant. Filament layer adhesion must be very good! (I printed out from Fiberlogy…
Original file from MeowCha on GrabCad: FN FAL | 3D CAD Model Library | GrabCAD The OG file was just one big stl file. I separated all the files on this one and exported each of the parts. I also included an f3d file of the original file…
This is the Goblin, a single shot break open Silly Shell fed foam blaster. It can fire any ammunition type that can fit in a Silly Shell; you'll get solid performance from multi-dart shells, up to over 200 fps out of a sniper shell. You…
“If you see me, it's already too late” SPIRIT A brushless flywheel blaster by wonderboy v1.6.2 - 11/18/2024 Once upon a time, I really wanted to build a T19 dart blaster (by torukmakto4). Some time later, I saw a Gryphon remix with a T19…
Combined 2 different DL-44 files found here on Thingiverse to try and get the proportions a little more to scale. See "Remixed Files" section for source files. Since this was made by combining two different source files, the flash…
DC15A Heavy Blaster. Measures 1.3m long when fully assembled! Model is sliced into 11 parts with keys for easy printing and assembly! For personal use only!
Hello everyone! This is the Snapper, a 3D printed blaster shell that I designed to closely resemble the look and feel of the Nintendo Zapper. The Zapper is a classic toy blaster that I’ve always loved the look of, and over the years I’ve…
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
Hey guys, I needed a blaster for events lasting two or more days — something compact, with at least six shots. One-handed control would definitely be a nice bonus. The Hammershot is a great blaster, but it's bulky and only holds five…
This is a digital 3D printable model of a LEGO blaster from Star Wars. The download contains pieces of the blaster ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on…
For all you lego fans out there, here is a blaster for you to add to your collection. Inspired by tomvdb's Big Lego Flower, I decided to design this over-sized lego weapon. I used a few reference photos and this is what I got. Support is…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
This model is compatible with the lego system.
Assembly Guide: TIP, Make Sure The Screw On The Blaster Is Tight Print Settings: Try and use the .3mf file instead of just the .stl, there are a lot of setting changes! Setting Changes (for .stl): Ironing, all top surfaces (FOR AK47_1…
These prints replace SOME of the normal SLAB v4 parts. The rest of the SLAB v4 parts require NO MODIFICATION. The print orientations on these parts are incorrect as imported. Follow the print orientation of the standard Imperial spec…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Check updates at the bottom The print files only contain my modified parts, so you'll need to print these plus parts that the original battle axe has, the original…
This is an ergonomic picatinny grip I designed primarily for springer nerf blasters with a heavy draw. Taking inspiration from the FAB PTK grip, the key feature of this grip is the forward index finger, which gives excellent grip and…
I'm making a "The Mandalorian" blaster in 4 parts. for better printing, faster Printing !!, with connectors, without ugly supports and no unnecessary assembly, simply simple and good!! happy printing :)
UPDATE 2/1/2024: Uploaded and set better cover photo. UPDATE 8/16/2023: Edited Contact Me portion of description to specify how to DM me. I will generally not be accepting random friend requests, so please join the /r/Nerf Discord server…
INFO: Instructions available as a PDF in the attached files. -------------------------------------------------------------------------------------------------------------------------------- Hello hello Nerfers! The Silica-5 is a massive…
IF YOU ARE BUYING YOUR HARDWARE KIT FROM BEARSWARES, PRINT THE REMIX! Read the guide before building a Shellfish! PDF in files! The Shellfish: A Silly-Shell blaster that does it all :) This is a spring-powered revolver shotgun/grenade…
This slick display stand for Han Solo Blaster DL-44 is designed to be as least visible as possible, in order to emphasize the displayed object, rather then itself. Tailored specially for https://www.thingiverse.com/thing:1915956 , but…
Main features: Half length dart blaster K25/K26 spring powered Real steel-esque proportions Sturdy design with heat set inserts, M3x500mm threaded rods Straight forward assembly Spring-loaded prime return (if desired) Easy to print parts,…
This is a remix for the pusher and breech of the Smiley blaster, so it now doesn't need any brass for the breech. The only added hardware is 2x -012 o-rings, for the tip of the ram. You DO need to lubricate the o-rings at the tip of the…
This is a simple "Plume" sprinkler / myster / water blaster thingie. Gives nice coverage even at low pressure, more of a mist than droplets. Can be used as a hand watering tool too, or even as a "crazy blaster" by putting it on the end of…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
This is a BETA release of the Dan Pistol by Orion Blasters. Posted with permission by https://orionblasters.com. Hardware kits available here: https://outofdarts.com/products/orion-blasters-dan-pistol-hardware-kit 3MF for Bambu Slicer is…
Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…
The PBR Bow (Pull Back and Release Bow) is a very simple faux-bow blaster with a modular front end for many different loading methods and ammo types. DOWNLOAD THE PDF ASSEMBLY GUIDE IN THE OTHER FILES SECTION OF THIS PAGE! Sellers…
This is a digital 3D printable model of the blaster from Star Wars The download contains pieces of the blaster ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the…
A one to one replica of the Westar 35 Blaster used by the Mandalorians in Star Wars the Clone Wars and Star Wars Rebels.
This is my model of a modified Sterling SMG MK4 (L2A3) and E-11 accessories carried by sandtroopers in Star Wars. These were deactivated for use on foreign sets. Sterling parts were modeled to measurements taken from an actual Sterling…
This came about because of a dream, not my dream but a wonderful dream. Kelly Cline @kcline had the idea of having a device that would be able to launch some peanut butter cups so that someone would be able to catch them from 10ft away.…
Here is my take on the Lego Star Wars blaster! This model is scaled for 1:1 (cosplay accessory / prop), 1:6 scale (12 inch action figures like Hot Toys / Sideshow) and finally 1:12 scale (for 6 inch figures like Hasbro Black Series /…
Made a DC15 Blaster from Star Wars. It's a mix between the A and S model blasters and not 100% screen accurate but very similar still. Hope you like it! For personal use only!
DC17 blasters and holsters based on the animated series and as used by characters like Captain Rex. These are sized at 1:12 scale for customising 6 inch figures, 1:6 scale for 12 inch figures and 1:1 scale for life size props and…
The original stand was wobbly because it was too thin and the scope shifts the center of gravity of the gun. I redesigned the stand from scratch to support the weight better and use less material. I also redesigned the tag to allow for…
