Counting matching models…
The original Røde lavalier clip is made for shirts, to clip horizontally. I normally wear this mic with t-shirts (mounts vertically) and I needed a solution to hang it properly and hide the cable. This model could work with many other…
Model This allows you to hard mount a Sennheiser G2/G3/G4 RX or TX Lavalier pack on your camera rig / audio recorder. You can either use the stainless steel belt buckle to attach the 3D printed plate or double sided tape (Recommended -…
Designed this a few years ago to fit a Sure Lavalier mic after the original broke. Inside diameter of mic mount 11.7mm. Remixed from: https://www.thingiverse.com/thing:23325
A modular desk stand for Lavalier-type clip-on microphones. The stand comes in three parts: Base, arm and replaceable mic clip. The arm is available in 200 and 250 mm length and clips into the base - no fasteners or tools required. I used…
The clip that comes with the Boya M1 is perpendicular - ideal for zippers, button-up shirts, ties, etc but I'm often in a t-shirt. You can loosen and twist the included clip but it's a bit unstable in its other orientation. This clips…
Rain cover for Lavalier Microphone Rode Lavalier GO for bird detection with Birdnet-Pi. It's big enough to fit a dead cat windprotection for the microphone. The microphone is outside for 24/7 recording and automatic identification of bird…
Boya BY-M1 might be the perfect starter microphone, but the chord is much longer than I’ll ever need. And if you have one, you know you need to carry extra batteries. So, I over engineer with this #3dprint wrap where the mic and the audio…
lavalier microphone / neckmic clip replacement , snap fit like the original
Rode Lavalier GO discreet mount Discreet mount for Rode Lavalier GO. Usage Remove noize shield and just clip the mic into the mount. Needs double-sided tape to attach to a surface. All questions and feedback welcome! All modifications…
I designed these Rode Lav mic clips so I can have better "wearability" of the mics. U-shaped serves as a clip. I-shaped serves as discrete mic hidden under clothes. You need to use some tape to hold it on the skin. This should provide…
I bought one of these cheap microphones online with USB C that you can just simply plug to your phone. Suprisingly they work very well but I didn't like the original box so I designed my own nice and solid box that can hold the…
A small adaption to the
This clip secures a Rode Lavalier II to the Wireless Go so it won't easily unplug. Its designed specifically for the Rode Lavalier II as it has the protruding brass, knurled grip. I have only printed this in the downloaded orientation…
Shock mount for lavalier microphones (tested on Boya-M1), allows using the lavalier microphone as a standard mic. Supportless print. You'll need some rubber bands (I use 30x2 mm o rings). Now with pop filter. Blog post with audio samples:…
I designed a clip for the Boya BY-M1 Omnidirectional Lavalier Microphone as mine broke and needed and urgent replacement. I tested the model and it works perfectly. Best printed with: 1.6 mm layer high for strength
Box designed to hold the rubber that comes in the original box of the K9 lavalier microphones sold on Aliexpress. It is excellent for microphones that do not come with cases. The measurements are just right so that it can be placed inside…
Magnetic holder for Lavalier microphone with 6.4mm neck. Magnet used is 8x3mm. Magnet allows attaching microphone to any magnetic surface or placing magnetic item behind clothes if mounted on clothes. It can be used to hide microphone…
Cute and stylish mini microphone cover for cheap lav / lapel mics designed for that specific one, may work with others of similar size Prints in 3 pieces Handle snaps together over the mic Handle screws into the printed windscreen…
This wall mount should hold just about any transmitter pack for lavalier style microphones (including head mounted microphone). If you use a head mount style microphone (as in picture), there is a notch at the back of the mount, to hang…
Sunflower bezel attachment for Lux Lavalier Remixed from this sunflower by tracy216 : https://www.thingiverse.com/thing:4590872 Printed on a Prusa i3 MK3S+ in PLA with 0.40mm nozzle and 0.20mm QUALITY PrusaSlicer preset with supports…
Sennheiser SK150/250 mic lavalier organizer. So you can pack cable and mic on the transmitter
I have a cheap lavalier microphone from FIFINE. The original clip broke very quickly. So, I designed a small stand for this mic in FreeCAD, the model is included. The assembly requires a small number of m3 screws and nuts. All is printed…
A cover for the Sony Multi Interface Shoe that allows for a Lapel microphone to be clipped on and attached. Protects the digital pins by covering them. The cover does not touch the pins at all. Should work with all lapel microphones with…
EN: like the title says it is a tabletop holder for a lavalier microphone in case you want to use it for narrating or other similar applications. Might seem kind of a weird thing, but in my case I only have this microphone, so I use it…
One of the best headphones you can buy for under £200 is the Japanese-designed audio-technica M50x's. They are meant for studio sound monitoring and have a flat response to provide true to life sound. However they don't have a built in…
-Lav cage requires paperclip pieces to glue in (don't use pliers as they may create burs that catch on cloth). Widen holes with tweezers if necessary . -tapedown clip is superglued to a piece of leather. -use clear nail polish over top to…
Keep your Kukiho Lavalier Microphone safe and secure with this rugged protective case, designed for professionals on the go. This case ensures your mic, windscreen, and accessories stay organized and protected from drops, dust, and…
Summary Magnetic holder for Lavalier microphone with 9.45 mm neck. Magnet used is 8x3mm. Magnet allows attaching microphone to any magnetic surface or placing magnetic item behind clothes if mounted on clothes. It can be used to hide…
Fifine M6 Wireless Microphone started annoying me with its short battery life (it shut down in the middle of a meeting/gaming match way too many times). You can use the microphone with a USB-C cable, but then you have an annoying cable…
This model is a 3D printed bezel that snaps on to your Lux Lavalier . Print a bezel for your Lux Lavalier in whatever material and color you want! Lux Lavalier is a beautiful wearable 40mm battery powered pendant necklace with 64…
This model is a 3D printed diffuser / cover that snaps on to your Lux Lavalier . Print a diffuser / cover for your Lux Lavalier in whatever material and color you want! I recommend Atomic Filament Translucent Smoke Black PETG Pro (used in…
I got commissioned to make this for someone because the rotating clip part kept breaking due to poor plastic quality. Solve the same issue for yourself with this cheap part print with 0.1mm layer height, supports, and PETG filament. If…
It is attached to the shirt with a safety pin on the other side of the shirt. Very clean look, but a bit awkward to pin on.
Rough edit in PrusaSlicer to fit USB Type A. Nothing was precisely made so fair warning. Silicon or caulk for water.
This model is a 3D printed bezel that snaps on to your Lux Lavalier Heart . Print a bezel for your Lux Lavalier Heart in whatever material and color you want! Lux Lavalier Heart is a beautiful 42mm heart-shaped disc with 74 SK9822-EC20…
As requested by a Reddit user. Requires two round 12x2 mm magnets. Print the hook part on its flat side. Work in progress!
Compact microphone case for the Mini Mic Pro (brand unknown, search Amazon for Mini Mic Pro). This case will hold the full contents of this lavalier mic package. I had originally used a larger case I downloaded for about a year, but it…
I needed some protection for my outdoor mounted lavalier mic used with BirdNET-go and created a small cover. The mic clips to the one of the bars on the underside. I used some pipeclamp for studio use and mounted the cover with a standard…
Turn your Apple Watch into a compact lavalier microphone. This 3D-printable mount lets you attach an Apple Watch directly to your clothing and use its built-in microphone for voice recording. Simply remove the watch band, insert the Apple…
I needed a way to store my Godox lav mic when I'm not using it, but make it easy to grab. So here's my Godox mic holder for my skadis pegboard. My gain is your gain. Recommend brim due to the hook's small footprint, but brim helps if that…
Designed and tested for the LG 27MK400H-B monitor. The mounting system may also be compatible with other LG monitors and products that use a similar upper bezel profile and thickness. Users with other LG models are encouraged to verify…
Convert a single Sony ECM-44B lavaliere microphone clip to a dual microphone clip. May work with another lavaliere microphone of the same diameter of 8.5mm.
Gridfinity bin sized 1x3x3 for a compact wireless lavalier microphone kit. The seller described the kit as including a charging case and receiver for use with phones, tablets, gaming, and live streaming. The microphone has no markings or…
I needed a way to store my Godox lav mic when I'm not using it, but make it easy to grab. So here's my Godox mic holder for my skadis pegboard. My gain is your gain. Recommend brim due to the hook's small footprint, but brim helps if that…
