Lavalier microphone case - Mini Mic Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact microphone case for the Mini Mic Pro lavlier set - no additional hardware required, prints with minimal supports
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
Compact microphone case for the Mini Mic Pro (brand unknown, search Amazon for Mini Mic Pro). This case will hold the full contents of this lavalier mic package. I had originally used a larger case I downloaded for about a year, but it was difficult to fit in a pocket. I designed this one from scratch to save some space, size comparison in one of the photos (new = red, black = old).
This is for the version that does not come with a charging case from the manufacturer.
Printing notes:
- This will be a very snug fit on the mic clips to prevent rattling in your pocket. If you would like it roomier, print at 105% or 110%
- The foam mic covers (interchangeable with wind guards as shown) fit underneath the mics at the bottom of the pockets.
- The mic clips must be installed in the opposite orientation of each other in order to both fit the case.
As shown in the photos - printed on a Elegoo Neptune 4 plus using Microcenter basic PLA filament with tree/auto supports (only on the extreme bottom edge of the lid and base) and 30% infill.