Lavalier microphone case - Mini Mic Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact microphone case for the Mini Mic Pro lavlier set - no additional hardware required, prints with minimal supports
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Compact microphone case for the Mini Mic Pro (brand unknown, search Amazon for Mini Mic Pro). This case will hold the full contents of this lavalier mic package. I had originally used a larger case I downloaded for about a year, but it was difficult to fit in a pocket. I designed this one from scratch to save some space, size comparison in one of the photos (new = red, black = old).
This is for the version that does not come with a charging case from the manufacturer.
Printing notes:
- This will be a very snug fit on the mic clips to prevent rattling in your pocket. If you would like it roomier, print at 105% or 110%
- The foam mic covers (interchangeable with wind guards as shown) fit underneath the mics at the bottom of the pockets.
- The mic clips must be installed in the opposite orientation of each other in order to both fit the case.
As shown in the photos - printed on a Elegoo Neptune 4 plus using Microcenter basic PLA filament with tree/auto supports (only on the extreme bottom edge of the lid and base) and 30% infill.