Counting matching models…
A tamping station compatible with Lelit 58mm portafilters (PLA580*) for the Lelit Glenda and similar espresso machines. There are two versions, one is a simple tamping station with slots for the ears of the portafilter and the other is…
For installation remove the backwater outlet of the E61 Grouphead. The nozzle must be at 6 o clock. The adapter fits very tight. I printed it from PETG maybe ABS would be better on long term. If there ist some trouble with the PETG…
Lelit Bianca portafilter holder
I made a new magnetic funnel for my portafilters. I own a Bezzera BZ10 (used to own a Gaggia Classic) and an open basket portafilter with an IMS B702TH26.5M basket. The Outer Diameter is about 70mm for my portafilter. The E61 variant has…
Lelit espresso 57mm portafilter holder with rubber feets
revised version of https://www.printables.com/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr for lelit
Coffee funnel for my Eureka Mignon & Lelit PL81T 57mm carrier, should fit fine for a PL41TEM. The side-opening fits the eureka outlet nicely, lets you press the button and you can leave it on when using the tamper. The default inner…
V2: Add filet to the edge of slot, which makes sliding portafilter handle into the slot easier. Stable while tamping, and fit with short tab version of “ Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool” Printed with…
The arm press fits with the stock knob and can be removed if needed. By request I've created a Gaggia classic pro version. To get the sizing perfect print off the sizing model (about 15 mins to print) and adjust the scale %(try 102% to…
Portafilter Stand for Lelit Bianca. Small base to easily fit on a small scale (I tare my scale to the portafilter then weigh the beans with the portafilter). Balanced so the portafilter will rest without having to hold the handle.…
Lelit Bianca pump valve presssure knob
Remixed version of botisto's 'Bigger Feet for Mara X'. I made these feet smaller than botisto's version as I didn't want the machine raised too much. I also added ‘bumpers’ that can be printed in TPU to provide a soft surface so you don't…
Inspired by Bemko, I did a similar support for my portafilter. It's not the same design, as he didn't share STEP file and I had to make a new one from scratch, but it keeps the same function and design (vaguely). To be placed under the…
The tray design is made to prevent water from bouncing off the tray floor and splashing over the front plate of the machine. It's sturdy, functional, and looks great in my opinion. This grid replaces the metal one that covers the…
This is an espresso distribution tool, adapted for the Lelit 57mm portafilter (matching Lelit Anna and Anita). It locks onto the portafilter, making it easy to use. Thanks to: iliasl for his E61 version:…
This is my own design of the drip tray indicator A piece of filament holds everything in place so it cannot fall off when emptying and cleaning the tray.
Settings: 0.15mm layers 4 top / 3 bottom layers 2 walls are sufficient 10% gyroid minimum No supports i scale down the original files and i have fix the holes for the screws so you can use the original Instructions i have re upload the…
This is a knob cover designed to make your Lelit Elizabeth steam knob more substantial. The design is inspired by the Lelit Bianca knob. The cover is inserted from the back of the original knob and secured with a threaded cap to prevent…
Replacement steam knob for Lelit Elizabeth coffee machine.
Water funnel for filling Lelit Grace PL81T from the left side, since mine is positioned under a sloping roof on the right. Still able to use the original lid to close the top.
This is my 2nd design of Lelit Elizabeth steam knob cover. Check my 1st design here . I feel this type of design is more comfortable to grab and turn compare to my 1st model. The cover is inserted from the back of the original knob and…
This is a portafilter holder for the Lelit Anna. It's designed to fit on the front part of the machine.
Lelit William PL72 coffee chute This is as chute for the Lelit William coffee grinder. It was created for the Lelit 58mm porta filter, but it might also fit other ones. I had an issue when grinding a specific brand of coffee. The ground…
This house is not limited to just candles! Even though this house was originally designed it to house a candle, as shown in the pictures, you can fill this house with anything , it is extremely versatile, so you can showcase your…
Since I was getting tired of holding my portafilter in place while it was doing its grinding thing, I thought I could invest 12 hours to design a gadget that holds my portafilter for me and saves me 12 seconds. Such smart. Anyway, Im…
For manufacturing you will need disk-shaped neodymium magnets, 3mm in diameter, 2mm in height. In the photo there is an option with six magnets, but now it seems to me that the option with ten magnets works better. The attachment contains…
This is a simple drip tray indicator for Lelit Anna espresso machines (and other drip trays with the same hole diameter). Sadly, the Lelit Anna does not come with an indicator on how full the drip tray is which can lead to a mess. This…
This knob is made for the PL41EM. The inside diameter is 6.1 mm (slicing tolerance: middle). It should also fit the PL41, just check the diameter or spare part information before. The knob itself is bigger than the original to have better…
I redesigned the funnel based on my 2023 Lelit Anna with PID. I am still not perfectly happy as the water still spills sometimes, when poured to enthusiastically. Printed Standing up on left side with support. Update Jan 2025 Added a 1 mm…
A 58mm espresso tamper holder designed to hang from the side of Lelit Mara X. See my other models for a matching (and editable) WDT tool holder. The photos show it printed in Prusament PETG Galaxy Black on an MK4, default settings, 0.15…
desing requires 8 6x3mm Neodimyum magnet for funnel and 4 5x5mm magnet.
this is the modified base to fit 58mm portafilters with a 72.5 diameter, i also modified the stoppers and holes to match
Hier ein komplett geändertes Gehäuse für ein ESP8266 NodeMcu Lua WiFi V3 Modul ( https://www.amazon.de/dp/B0CLXZG25B?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ) das zum direkten anstecken an die Mara gedacht ist. Da das Originale Gehäuse für…
This is a portafilter stand for Lelit Filterholders (57mm). There is a weight (50mm diameter, 8mm height) added during printing. I used a steel disk. The total weight is about 260g. Note: If you do not add the weight the whole thing will…
Simple Ikea Skadis pegboard bracket for a 58mm portafilter. Modeled around the Lelit Bianca portafilter. As it is made to hold the E61-style locking tabs, it might or might not work for other 58mm portafilters. I only have the one…
Dies ist ein einfacher und praktischer Halter, den ich bei Jan K. gefunden haben, den er aber auch schon hier her kopiert hat. Ich habe ihn noch von den Löchern befreit, damit ich ihn mit Nanotape befestigen kann. Ich verwende dafür…
made for the newer longer spout
I needed a tamping station / accessory organizer for my espresso corner and came across this model from alasdairedward: https://www.thingiverse.com/thing:4409957 If you have a 58mm Lelit portafilter from the VIP line, you will need the…
Lelit bianca tray grid that hides waste water and easy to clean. Print in ABS with 0.4 nozzle
The Lelit Bianca comes with a metal grid platform that is used to raise the cup closer to the porter filter. Pushin4D designed an anti-splash grid for the drip tray, however, the original metal platform doesn't fit well on it anymore and…
Single portafilter holder for Lelit Diana (and others). Portafilter size is 58mm / E61 brewing groups.
The used wood compound needed a slow print 85% and slightly higher Flussrate, 105. I also increased the bed heat to 75°. It was my first print with the old and my 3rd in total.
Box for 6 SD Cards and a mobile SD card reader designed in FreeCAD. Source files included. Print instructions I Print with .6 mm nozzle, which I find to be the best for this scale of objects.
Steam Handle. Hole at the top so you can rotate it with your finger inserted. Ensure your filament is calibrated, as this is a perfect fit. If it doesn't fit, then re-calibrate Flow and PA
This is a funnel design for the Lelit Elisabeth espresso machine. The funnel enables easier water insertion and prevents rattelling of the two silicone hoses. Use food safe filament! e.g. PETG or PLA.
I used ASA filament. May be it's not too tight but it's work without any issue. Thanks.
This is a tamping station for the lelit kate. Why would anyone need a tamping station for a portafilter that comes with a very well designed outlet that basically has the tamping station built in? Well, I prefer to use a single-outlet:…
The original version was a fraction to tight on both Lelit's and Rancilio's portafilter's so I increased the inner diam. Not tested yet. new version added today 23.05.2023. I had previously exported the file in meters and not in mm. Now…
Look out when printing that the support is not too dense else it will split like mine. Hanger is easily mounted or dismounted to clean machine.
This Día de los Muertos Hueforge piece beautifully honors the tradition of the ofrenda, featuring glowing candles, marigolds, and papel picado strung across the top. A smiling skeleton in a sombrero sits framed at the center, surrounded…
Hi! ¿You bought a Lelit Fred because is a good, affordable coffee grinder but you don't own a Lelit machine? You are not the only one! You will need a Torx 15 bit to loosen the screws and an adjustable spanner to loosen the button guard,…
This magnetic coffee strainer holder is a perfect solution to keep your extra strainers neatly organized on the side of your Lelit Anita or Anna espresso machine. The holder attaches securely using three magnets and is designed to…
Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…
Support for 57mm naked filter holder (Lelit)
A replacement push pin style E61 group head lever knob for the Lelit Mara X. The grove makes it easy to lift and lower the lever with your index finger. The knob is threaded and directly replaces the original black knob. Printed with a…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
Filler neck for my “Lelit Kate” espresso machine As my coffee machine is placed under a kitchen cupboard, filling the water tank is not very convenient. Unfortunately, I couldn't find a suitable model that I liked, so I designed my own…
Diesen Trichter habe ich genau so erstellt, dass er auf den 57 mm Siebträger einer Lelit-Espressomaschine (bei mir: Grace) passt. Dabei habe ich darauf geachtet, dass er innen bündig ist und außen begrenzt ist, damit innen das Pulver bis…
It happened to knock off something from my espresso machine top, so I decided that I should make an improvement. I've designed and printed this grid, with magnetic foots and modular stands to place and organize things on the top of this…
I made the feet to work with the existing MaraX Rubber Feet and a M6 Bolt with a captive nut. The process is completely reversible, no glue needed. BOM: 4x M5x12 Bolt 4x M5 Captive Nut 4x Washers, I used on with OD of 12 The alignment…
Parts used: NodeMCU Lolin V3 Module ESP8266 ( https://www.amazon.de/dp/B0DHY2KGBK ) 1.3" OLED display ( https://www.amazon.de/dp/B078J78R45 ) Software and Wiring: https://github.com/DiSanzes/Mara-X2-ShotTimer based on wiring diagrams and…
Steam handle with minimalistic, functional design. Hole at the top so you can rotate it with your finger inserted, fits over the stock steam knob. The part shown in the photo was ordered on JLC3DP and printed using 3201PA-F Nylon. If you…
Grind from your DF64V directly into your Lelit portafilter. The hole on the front of the model where the handle rests is for a 6mm diameter x 2mm tall silicone "dot" (like what you put under chair feet, but much smaller). This protects…
SD card holder which holds 4 SD cards and one USB 3.0 SD card reader. Durable design perfect for traveling. Compatible card reader: https://www.alza.sk/kingston-mobilelite-plus-uhs-ii-sd-reader-d5787695.htm?o=11 Recommended settings: 2-3…
I really liked the idea of that simple tamping station but my umikot has long tabs (for protecting the needles). so I extended the cutouts to fit. another change i did was to change the angle of the handle support to better fit the lelit…
Approximately has the height of the original cup tray when fully assembled with the scale. Top portion is easily modified/redesigned to mount a different scale. Requires 4 Button Head M3x4mm or longer screws to assemble
A drip tray for Lelit Anna coffe machine with lower clearence to support a coffee scale.
Ich benutze meine Lelit Kaffeemühle manchmal um Kaffee nicht für den Siebträger sondern für das Behältnis eines normalen Moka Espressokochers zu mahlen, dabei ging immer die Hälfte daneben. Mit dem Aufsatz der einfach aufgeschoben werden…
si la machine est bancale, comme les pieds ne sont pas réglables, cette rondelle de 0,5mm permet de rehausser un pied en la glissant entre le pied et la machine. enlevez le pied, y mettre la rondelle puis remettez le pied.
Create to print fast. Only 2 wall on most of the layer (Funnel) area. Can be print with PLA, but ASA/ABS should last longer if using you brew continuously more than 2 cup at a time. (The Portafilter really heat up) Have created a chute…
Being kind of a coffee nerd (which arguably is the unsexiest kind of nerd, maybe right next to... collectors of minerals or something of that kind) I was always bothered by fine coffee powder getting stuck in the chute if my grinder. When…
A very simple replacement cap for the MobileLite Duo flash drive / card reader. Printable without supports or any other special print instructions. I used black Overture PLA, but anything should do.
This is a remix of https://www.thingiverse.com/thing:7103145 that is specifically adapted for the Lelit Victoria (PL91T) espresso machine. I printed this model using flexible TPU, which provides durability, dampens vibrations during…
Design to be fast print using PETG, wavy curve at side wall is use to get spring type of press fitting with the dosing chute. For printing using 0.2mm layer height. If prefer aesthetic can refer to 3mf file that have variable layer height…
Dosing funnel for Lelit Anna 57mm portafilters that stays in place! After long time of using existing 57mm WDT tools 3d printed, and using funnels designed to work with those tools, I got tired of them not staying in place, sometimes…
This custom adapter allows you to use a Lelit 57mm portafilter securely with the popular Knodos Wooden Tamper Station (which is natively designed for larger 58mm portafilters). Without an adapter, 57mm portafilters sit loosely or tilt in…
Riser feet for the Lelit MaraX v2 coffee machine. As the MaraX v2 lacks threaded inserts, the feet are mounted using a flexible TPU 95A expansion plug. An M4 nut is inserted into a slot inside the TPU plug, which then fits into the foot.…
Das Modell ist ein möglichst einfacher, platzsparender Trichter bzw. Erhöhung für den Siebträger. Somit kann man leichter die benötigt Kaffeemenge einfüllen. Ein Krümeln wird verhindert, besondes beim Lockern des Kaffeemehls. Die Idee…
This house is not limited to just candles! Even though this house was originally designed it to house a candle, as shown in the pictures, you can fill this house with anything , it is extremely versatile, so you can showcase your…
Since I wanted to hang my WDT-Tool next to the tamper of my Lelit Mara X Espresso machine, I:ve merged the two models together. Print with supports on bed only. Print with PETG or ABS, PLA works if you use it in the back of the machine…
Steam handle with minimalistic, functional design. Hole at the top so you can rotate it with your finger inserted, fits over the stock steam knob. The part shown in the photo was ordered on JLC3DP and printed using 3201PA-F Nylon. If you…
I really liked the idea of that simple tamping station but my umikot has long tabs (for protecting the needles). so I extended the cutouts to fit. another change i did was to change the angle of the handle support to better fit the lelit…
I redesigned the funnel based on my 2023 Lelit Anna with PID. I am still not perfectly happy as the water still spills sometimes, when poured to enthusiastically. Printed Standing up on left side with support. Update Jan 2025 Added a 1 mm…
It happened to knock off something from my espresso machine top, so I decided that I should make an improvement. I've designed and printed this grid, with magnetic foots and modular stands to place and organize things on the top of this…
I needed a tamping station / accessory organizer for my espresso corner and came across this model from alasdairedward: https://www.thingiverse.com/thing:4409957 If you have a 58mm Lelit portafilter from the VIP line, you will need the…
This is a funnel for a Lelit 58mm portafiler with two flaps. It is designed to fit exactly under my Quamar grinder, but should also fit under other grinders. Just print upside down to avoid the need of support.
Das Modell ist ein möglichst einfacher, platzsparender Trichter bzw. Erhöhung für den Siebträger. Somit kann man leichter die benötigt Kaffeemenge einfüllen. Ein Krümeln wird verhindert, besondes beim Lockern des Kaffeemehls. Die Idee…
The metal tabs on the grinder tend to scratch the bottom of the portafilter, this cover fits the Lelit PL53 coffee grinder. Print 2 with TPU and slide them on the grinder, your portafilter will thank you. Print vertically (with the…
The water funnel is convenient for adding water to the water tank without removing it. I also added an adapter if the water tank is lower in the machine and the end of the funnel is too short.
This is a simple wrench for the Lelit William coffee grinder. Recently, moving the dial for changing how fine the machine grinds the coffee got really hard. Without any beans, it's not very hard to turn, but with I cannot move it at all…
3D printable digital file of a Servo Skull - a sacred relic of the Omnissiah. Print it on your multi-material printer, or paint it by hand. Add LED candle tips and fishing line to let your Servo Skull hover and drift bodiless through the…
This Lelit Bianca portafilter holder has been modified for the feet of the DF64V grinder so that you can grind directly into a portafilter rather than a catch cup. The model has also been modified to work with the Umikot and a funnel.
A bellow to allow to blow all the ground coffee out of the grinder. Printing with TPU 95 HF worked without supports and without a hitch. Make sure to orient the bellow upside down because of the internal lip. The surface on the print bed…
This is a model I built for a friend and I haven't got to iterate over it much, he was quite happy with the result on the first try. The fit with the bean hopper seems to be bang on, while I think the bellow fitting could be improved, at…
print upside down with support as shown, you can leave under the cover, the tubes passes under the funnel
I just added a tab to the original to keep the bottom part in place. Now it doesn't move at all when pushed against the portafilter. Needs support. You can use my file with paint on support (3mf file).
Espresso WDT distribution tool side holder for Lelit Mara X. The STL has a hole made for WDT with diameter of 27mm, however one of the sketches in the attached Fusion 360 project should make it easy to adjust for other WDTs as well. The…
You can use .stl files to directly print the thing or use .steep file to make your own modifications. I didn't scale in the Z axis (vertically), so the needle's length should stay the same as in the original model. Hope it works for you!…
![[finecoar] Lelit Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/767819/images/5982847_06342cb6-5163-44a8-b849-1e627a4129b4_20bb7583-155e-4354-be57-0393f5515ec0/p1040379.jpg)
