30 models
👇 Watch the reveal video! 👇 Lemontron is a new free and open source portable printer that is making the rounds online due to its unique form factor– Fitting in a box of filament, it sports a build plate comparable to a Bambulab A1 Mini…
💪 Wow! Such performance! Watch the reveal video! 💪 Lemontron "Rev E" builds on the previous versions: “Endgame Lemonstruder” - 4.5:1 gear reduction + 100% PTFE filament path (not the same as the beta) Relocated Tensioner - Unlocking extra…
This groundbreaking new design has some characteristics of the first tool end-- most of the air still shoots out the front, but some of the air is delivered around to the back. I was able to modulate the air going to each section by…
Zest is a Foldable Z-axis (pronounced Zed) modification for Lemontron. It allows for neater and faster setup and storage and should be a near drop-in replacement for Lemontron's Unibody Chassis. Pint Setting - Refer to Lemontron's Print…
I've added holes to add 4mm PTFE tubing for the spool to rest on. This ensures the spool rolls off better, quieter, without that weird white dust that likes to accumulate. Cut the PTFE to length and just push it into the channel. It…
As the pulleys used on the Lemontron are fairly hard to get, I decided to give printed pulleys a try as a temporary solution. The hole for the grub screw needs to be manually drilled for now. This is not meant to be a permanent solution.…
This is a major leap forward for Lemontron. It's an extensively tested 4.5:1 gear reduction. Do not build a Lemontron Rev D without it. The purpose of this beta is to use the Endgame Lemonstruder on your Rev D Lemontron, as opposed to…
If you aren't already using the new lemonstruder , you should try using that instead of this! This is a modded extruder for the Lemontron that adds torque and helps keep the filament pushing gear from overheating and softening the…
Cuttingboard is a redesigned bed holder with Thumbscrews for toolless assembling and adjusting the bed, Reduces warping during and post-print, and is small enough to print on a smaller printer (i.e. Lemontron) [2025.12.19] add Bed Holder…
Lemonade is a modification that improves the cooling of motors. Placing the fans directly beside the motors with heatsinks attached allows fans to pull a double-duty of cooling the motor and internals (SKR Pico, Raspberry Pi, PSU) I have…
These toothed idlers actually did absolutely noting . The test benchy came out completely indistinguishable from the non-toothed idlers. The non-toothed flanged bearing is also much stronger, 100% metal, is able to take more torque, and…
This is the bed holder, and other related parts from the upcoming Rev E release. I am releasing them now because they are compatible with the Rev D, so it would be a shame to keep them squirreled away! Print Settings 5 top/bottom layers,…
RECENT UPDATE: Modified tensioner screw cap and added shortened Lemonstruder pieces for durability and more range of adjustment I had a lot of trouble getting a K1C gear that could grip filament well enough for my rev E lemontron. I…
THIS IS A SNEAK PEAK DRAFT! DON'T ACTUALLY PRINT THIS UNLESS YOU WANT TO SWEAR A LOT! This new tool end is a refinement of the existing Lemontron wraparound duct. It has a new sexy design with the most intricate CAD work of any Lemontron…
This mount CANNOT be used during normal printing - you must put it on before use and remove it once finished. Remove the screws attaching the toolhead to the X carriage and screw the mount in place, so that it screws the toolhead back in…
My spin on the Lemontron toolhead. I've cut the original cooling path in half, and directed the airflow into a duct around the hotend for better (??) part cooling. Testing ongoing Print carefully, thin walls, maybe needs arachne (i hate…
Uses 1 20mm M3 countersunk screw and 2 M5 bearings from the original Lemontron BOM to make a spool holder that spins freely, slightly reducing the amount of work the extruder has to do and reducing wear on the spool holder. During…
It uses two small bearing from the BOM plus four M3 screws if you don't count the ones that are on the rail I've just designed it but I am not able to pint it right now Link to discord topic :…
Adds a handy USB-C port for the Lemontron so you can add a camera or sensor for input shaping, or even external storage if you want. All parts are printed in the given orientation, but you can of course rotate to fit. A 0.4mm nozzle with…
The Zest foldable z-axis mod integrated into the Lemontron Rev-E https://www.printables.com/model/1440115-lemontron-rev-e) design. Instructions from the respective original designs should be followed. In addition to the simple Zest…
Reason: I found the stock extruder of the lomontron under-powered so i made my own that is stronger. Printing: The mid- and top-plate should be printed as instructed by the lemontron build the pully gear needs to be solid but PLA is fine.…
This is a simple aesthetic remix of the Bed Stiffener from Art Nattanon’s "Cuttingboard" mod. While the original stiffener is great for structural rigidity, I wanted it to match the official branding of the Lemontron Rev E , so I…
Only change is the slightly other shape on the edge of plate - so no changes to initial print settings is needed Beware that using a 90 degree power cable will likely result into jamming wires and tube under z-axis gear block.
I added supports for Type-C connector window right into stl - so no supports needed. They come out quite easily with precision knife. Outline of extruder gear takes only one layer. So no changes to initial print settings should be needed.
As the pulleys used on the Lemontron are fairly hard to get, I decided to give printed pulleys a try as a temporary solution. The hole for the grub screw needs to be manually drilled for now. This is not meant to be a permanent solution.…
If you aren't already using the new lemonstruder , you should try using that instead of this! This is a modded extruder for the Lemontron that adds torque and helps keep the filament pushing gear from overheating and softening the…
Cuttingboard is a redesigned bed holder with Thumbscrews for toolless assembling and adjusting the bed, Reduces warping during and post-print, and is small enough to print on a smaller printer (i.e. Lemontron) [2025.12.19] add Bed Holder…
💪 Wow! Such performance! Watch the reveal video! 💪 Lemontron "Rev E" builds on the previous versions: “Endgame Lemonstruder” - 4.5:1 gear reduction + 100% PTFE filament path (not the same as the beta) Relocated Tensioner - Unlocking extra…
RECENT UPDATE: Modified tensioner screw cap and added shortened Lemonstruder pieces for durability and more range of adjustment I had a lot of trouble getting a K1C gear that could grip filament well enough for my rev E lemontron. I…
This is a simple aesthetic remix of the Bed Stiffener from Art Nattanon’s "Cuttingboard" mod. While the original stiffener is great for structural rigidity, I wanted it to match the official branding of the Lemontron Rev E , so I…
