Counting matching models…
I focused on functionality, ergonomy and good guiding and sliding when drawing. Ideal for home maker, wood workers. I often need to draw long parallel lines or draw right angles. . That is why the front part is also rounded and wider to…
I printed it wrom PLA with this setings: nozzle temp.: 200 C bed temp.: 60 C It took 29 minits to print. Čep2 file is updated disain. 25 min. print time.
This tool is used to measure lining thickness and drum wear heavy duty vehicles such as straight trucks, tractors and trailers. The gauge steps are in 32nds of an inch beginning at 28/32nds and going down to 10/32nds. The bottom notch is…
It's a clip for the chrome lining of an El Camino SS that I am fixing up. Youtube -----> @EliAndGabe67
RENAULT Seat reclining lever designed for a 2002 clio but will work with any models with a 10mm square lever axle fits the original cap printed with supports printed with heavy duty PLA 100% infill
This model is compatible with the lego system.
For whatever reason the bolt that holds the lining down is gone in my litter Robot, so I have made a new cap for it after about 6 months of being annoyed. Use the Screw Hole Tester to see which hole your printer says is suitable for you…
Just a better version of the last one :)
The jigsaw lining Phiolent Накладка для лобзика ФИОЛЕНТ ПМ2-520Э (PS 520E, ИЭ-5202Э) Печатал PETG 0.4, 0,42 4 дно 5 верх геройд 20%
Used Poly.cam to scan two cats affectionately nuzzling each other sculpture. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans…
Whatever bends the glass for sewing, I did not like the nuts, not too tight.
This is a cavalry movement tray i designed for a friend. It is designed to accommodate cavalry units with a base of 6x3cm in the following: 1 rank of 6 (6x18.5cm) 2 ranks of 6 (6x18.5cm)x2 2 ranks for 4 (6x12cm)x2 3 ranks of 4. (6x12cm)x3…
A reclining stand so you can place your projects wherever you want. Simply attach part 1 in one of two ways: 1.- With double-sided tape. 2- Drill a 45mm x 30mm x 0.9mm hole in the back and glue it down with superglue. Then attach part 2…
Накладки салазок передних сидений Toyota Auris 1 поколения. OZON 2204 3201 2575 1794
Trunk clip for Dacia. Maybe it will fit other brands.
Celebrate the timeless beauty of classical art with Reclining Muse , an elegant 3D printable sculpture inspired by traditional artistic forms. This detailed model captures a serene female figure resting gracefully on soft drapery,…
This tool is used to measure lining thickness and drum wear heavy duty vehicles such as straight trucks, tractors and trailers. The gauge steps are in 32nds of an inch beginning at 28/32nds and going down to 10/32nds. The bottom notch is…
Made by a few European drafting tool companies - specifically Dietzgen, Richter, Kern, etc... - these were precision-machined tools used for creating straight lines with different patterns. This is not the precision-machined vintage…
Same as the original, just modified for the driver side.
Based on Jiří Velan’s excellent design, I replaced the TPU-printed internal lining with laser-cut rubber foam. Instead of printing the inner lining in FLEX/TPU, I created 2D cross-sections from the original flexible inner part and saved…
To sell my creations, you can find commercial licenses on my Patreon: ZaphkielCreations A peaceful reclining Buddha sculpture designed to hold an LED candle . This model represents Buddha resting in a serene pose, creating a calm and…
It's a clip for the chrome lining of an El Camino SS that I am fixing up. Youtube -----> @EliAndGabe67
Juwel lining cover / Infeed lid Futterdeckel Aquarium für Juwel 180 Liter 0,16 Layer 0,4 Nozzle Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0,16 Infill: 20 Filament: Prusa PLA black…
Mount for the UniFi PoE Chime to fix ait in to a UK standard-size hole in a plasterboard wall, similar to any other dry lining mount. The cover is designed to fit in with other sockets, light switches or communications mounts. It requires…
Dieser speziell entwickelte Schuhanzieher erleichtert das Anziehen von Schuhen, indem er den Hinterriemen zuverlässig in Position hält. Durch die integrierte Führung wird verhindert, dass der Riemen nach innen knickt oder nach unten…
A phone stand in the form of a robot reclining. The robot is positioned such that the phone can be placed on the hands or on the feet supported by the knees or resting on the chin and supported by the hands. Subject to the size of the…
This is a microphone holder designed to go between the car lining and/or dashboard panels. The microphone has a 7mm ball, the socket is designed to be a snap fit. Design OnShape link:…
My car lacks accessible vents or places for suction cups, so, the only way to get a phone within the eyes' and arm's reach is either the ashtray or the lining. After trying out different designs for an ashtray phone holder with wireless…
Use case The FIAT 500 is notorious for having the outside trunk release switch stuck. In order to repair it, you need to remove the inner lining of the trunk. To do that, you need to pull the original pins out, which typically breaks a…
Hi, this is my design for a joining bracket for two seperate dry lining boxes placed next to each other. I had to cut part of the locking tab on my Appleby Dry Lining Box to make the sockets but up against each other. Leaving little space…
This is a remix of the combustion lining part for the 3D printable jet engine, inspired from: https://www.thingiverse.com/thing:2441852 The top of the support has horizontal protrusions to fully support the otherwise unsupported part.…
The reclining sofa I have had very cheap plastic buttons and the clips/flanges that keep them in place eventually broke off or were rubbed flat. Answer: caliper measurements, 5 model iterations, and some frustration. Works great in my…
Created a can holder for my Timber Ridge camping chair (lost original that came with chair). Fits normal can sizes. Original design is in 123D, working on openscad version.
Yeelight SLISAON switch dry lining back box Slightly modified from Aqara box: https://www.thingiverse.com/thing:3000987 Modifications: Switch fitment to box (fits flush with the wall) Back panel fitment (press-fits together) Tighter screw…
Yeelight dimmer dry lining back box Slightly modified from Aqara box: https://www.thingiverse.com/thing:3000987 Modifications: Dimmer fitment to box Back panel fitment (press-fits together) Tighter screw holes (you can now use screws…
Hello!! Here I have made a filament guide to stop filament coming off the spool mid print, I was having problems printing the base to my PS5 charging tower due to it being massive and taking 2 rolls of filament to print, when I would…
print orientation as it comes from the STL, ASA or ABS recommend for temperature stability
Bmw E30 - front headlining cover fastening latch. This part doesn't has own part-number. Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at the pictures. Fusion360…
If you find this thing useful, please consider leaving a tip. Thanks! https://paypal.me/cdsmakestuff Vehicle brake pad / shoe lining measurement gauge set. Quickly measure brake pad wear without pulling the caliper off. Three different…
This is a tool used to measure the brake lining on heavy-duty trucks. It's especially helpful for sticking through dust shields to measure the remaining lining while the wheels are still on the vehicle. I'm a mechanic and use this tool to…
Printed on SLS Printer (Nylon material). Printing on FDM, might not hold. Test at your own risk.
Tracing template On this trancing template, there are 10 different types of underline (circles, squares…) Height: 50 mm Weight: 8 g Width: 120 mm If you would like me to add something, write in the comments. I hope you like the model.…
You need to make a thread yourself by using existing screws. Print in Petg or other soft material. I used PLA and it's enough to last a few months.
As can be seen designed in tinkercad. Good to sand if your printer isn't the best.
A handlining reel to keep in your pocket or glove box. Printed at 0.2mm in PETG. Make sure your seems is set to random. There's a 0.5 mm tolerance between the parts so it should work with most printers. I've printed versions with smaller…
☸ 🪷 Reclining Buddha A reclining Buddha is an image that represents Buddha lying down and is a major iconographic theme in Buddhist art. It represents the historical Buddha during his last illness, about to enter the parinirvana . He is…
RENAULT Seat reclining lever designed for a 2002 clio but will work with any models with a 10mm square lever axle fits the original cap printed with supports printed with heavy duty PLA 100% infill
