Counting matching models…
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…
I had adjusted/remixed this model to max out the settings on an AnkerMake M5 Printer. The lamp itself couldn't be any bigger due to the constraints of the printer, but it's still just about the perfect size. The adapter for the lamp was…
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
This is a remix from Taylor Herrin . For more info how it is created see at the original model. The sculpture were so nice but I wasn't able to print it due to net errors. So I repaired it with Blender. In addition for faster processing…
"Snow" Globe Christmas Lithophane - A Christmas themed lithophane globe of a winter landscape. The STL file was created using Lithophane Maker Desktop , and the part was printed with American Filament Classic Lithophane White PLA . When…
Gothic Lithophane Lamp I wanted to make my Mom a Litophane lamp for Christmas so I looked on thingiverse but none of them were just right so I design my own. I decided to go with a Gothic style design, something really easy to use the dry…
230102: Added Base and Roof with slightly bigger tolerance since some had issues with the fit being too tight, Original parts have 0.5mm overall, parts with increased tolerance has 1mm overall. Base and Frame printed in 0.2 with 15%…
If you want to wish a Merry Christmas in a particular way, this could be for you THE VISUAL EFFECT IS POSSIBLE EVEN WITHOUT LED OR ADDITIONAL LIGHTS AT THE REAR. as you can see from the photos even by exposing it to the sun.With LEDs, it…
Cobbled together in PrusaSlicer Jupiter with the socket, printed fine from my side and looks great. Will print fine in PLA, I used Eono White PLA in 0.2mm layer height. For the light use for best fitment a E14 bulb or a small E27, the…
This is the amazing moon lamp by Frank Deschner, with the STL bug fixed. It prints flawlessy as the original, but you don't have to worry about the nasty layer messing up with your printer and fan, in case you slice it with anything other…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
*** Updated 12-FEB-2023 *** Now has a new connector option: Magnet. See three new photos. Using magnets in the base and top allows for simplified changing of the lithophanes. I used 4mm x 1mm cylindrical magnets. You can adjust the size…
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm , ⌀150mm (this upload),…
Feeling generous? Support me at https://paypal.me/MeasureOnceCutTwice No supports needed. This is an XL print with a duel nozzle. Import and merge the moon and head files and assign a color to each. Alternatively it can be printed without…
This expands the usable diameter of the opening of the moon lamp base from <60mm to >70mm . I have included several adapters to fit two moon lamps as included below. Hopefully the screw thread bases make it easier to work the tolerances.…
Lithophane Christmas Landscape Led Light Decoration.
None of the lithophane moons already here were quite right for me, the main issue for me being that there wasn't enough difference between the dark and light areas of the moon. I wanted to fix that. After a bit of experimenting, it turned…
This is a new twist for a stand of Frank Deschners popular Designer Lithophane Moon Lamp or My High Definition Remastered Version respectively. I wanted to design a more subtle stand, fitting the moon theme, so I came up with using a…
This is a calibration tile for finding the "maximum thickness" to enter into lithophane generators like lithophanemaker.com or 3dp.rocks. Values of 3-4mm usually work well, but since every filament absorbs light differently, you might…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Remix of my IKEA Halvklart lithophane picture frame New back design Added more stars New button What you need Printed parts (frame, cover, button) IKEA Halvklart USB LED spolight Don't forget to look at the remixes that use different…
Your city as a Lithophane While I continuously add new major cities to this collection, I may not have done your city yet. You can comment your city below and if I have enough free time, I may or may not create a Lithophane model for it.…
This is a lithophane light box that I designed in order to use flexible LED strip lights as the lighting source. The inside of the box has channels for routing the lights to get even back lighting on your lithophane. I add a few drops of…
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm , ⌀150mm , ⌀75mm (this…
This is a high definition recreation of the original and beloved Designer Lithophane Moon Lamp by Frank Deschner ( @FrankDeschner ). M aybe a gift. This is easy to print. This is an eye catcher. This is a remix. Globe: 21 cm / 8.2 in…
Print verticaly with raft and 100% infill.Use white PLA.
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
This is a remix of the Moon Lithophane to 150mm, with a base designed in OpenSCAD to fit an Ikea Stråla lamp cord. There's a hexagon pattern on the base. You'll need a suitable LED lamp, ideally a P45 (45mm pear-shape) bulb or something…
Pokemon lithophane lamp Print instructions Print litophane 30/40 mm/s max. i printed in PLA only.
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Snow delight lithophane ball with a tea light holder. It features a snowy winter landscape with a frozen lake. In the design, I removed the sky from the lithophane to allow light to shine out of the ball into the room, creating a…
These are 80mm diameter spherical lithophanes lit by tealights. There are 4 scenes and two hole sizes ( 35.7mm and 29.6mm ) for the tealights. Each one takes a little over an hour to print (on a Bambu X or P series). I have included both…
Introduction The two models provided here are simple test prints to find out how a lithophane will turn out with a specific filament and illumination. All Lamps of the Solar System Lithophane Planet Lamp Collection use a maximum wall…
Archangel Michael Lithophanes! Print instructions name: archangel michael orientation: vertical y axis align layer: .10m detail infil: 100 brim: yes printer settings - extruder1 - retraction: 0.07 - speed - 30 - retraction speed - 40mm…
These are mainly for use with the lithophanes available on Gadunky.com (but work on anything that will fit in them). They hold the lithophane at an 80° angle for best viewing(the flat section with the curve should be facing the back).…
Curved Lithophane Box. I wanted to make some lithophane lightboxes for some gifts and I found lots of good ones. However, I wanted one that was curved, held just one lithophane, and had a completely enclosed light box, and I just wasn't…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Lithophanes, is a beautiful picture that appears 3-dimensional when lit from behind. Show them with the easy-to-make lamp! And not only 1 but 4 at once. Used materials: FormFutura Premium PLA If you want to see more follow us on Instagram!
Auf der Suche nach dem perfekten LED Rahmen für Lithophane, bin ich auf ein Flurlicht mit nützlichen Funktionen gestoßen. Das LED Licht kann gedimmt, in der Farbtemperatur eingestellt und mit einem Schukostecker ausgestattet werden. Mit…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Halloween themed lithophane box with images of ghosts, skeletons, witches, and jack o lanterns. Images, lithophane creation, and box print all made by Megan. Lithophane box made using lithophanemaker.com, a free online tool for making…
.08mm layer height 45mm/s eSun white PLA 210/65 approx 15hrs
These models are remixed from Frank Dreschner's “Designer Lithophane Moon Lamp” [1], and raTmoles' lithophane solar system [2]. I extracted the bajonet adapter from Dreschner's original model and fitted it to the respective 3D model.…
[EN] A simple candle holder for candles of various sizes (from tea light to electric) with an Easter themed shade. The shade is adapted for easy flat printing with a layer height of 0.20mm. For safety reasons, I recommend using electronic…
I made this custom lithophane stand. I used one of our favorite character Goku as an image, but any photo can be used as an alternative. The lithographic image created with this site: https://3dp.rocks/lithophane/ and once the image was…
You can use this frame to backlight 4 Litophane pictures at the same time. Choose suitable images, print them according to the instructions below. Then print the frame and you have a nice gift for your next birthday. Assembly Such fairy…
lith holder with light holder, the adapter holds a 30mm led light from amazon, another adapter holds 35mm led tealights.
Christmas and Holiday themed tealight lantern lithophane ball. Lantern fits LED tea candle IKEA GODAFTON 4 versions: simple image with NO TEXT: "svicka_panorama.stl" simple image WITH PF2022 TEXT: "svicka_panorama_PF_opr.stl" detailed…
I printed the original moon lamp by @FrankDeschner but it met an unfortunate faith when my daughter knocked it onto the floor. So i decided to rebuild it…Bigger…Better…More stable! My printer has a build volume of 256*256*256, which…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
General Information I wanted an easy to print and nice looking frame for some Lithophane's I have. Furthermore, it should use cheap lights with batteries. I couldn't find something I liked so I drew my own in Fusion360. Parts and Tool The…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
I decided to make my own take on the Lithophane photo light box. I wanted simple lines and I like making my own stuff. Also didn't want it battery powered. This box is multiple parts. Base, Holder, Roof, and Top roof. It also has a “top…
This is a remix of Frank Deschner's twist-lock base for the 8-inch moon lamp. The remix allows the use of desk lamp bases with socket diameters of about 36 millimeters and about 28 millimeters. The moon globe itself is unchanged. I have…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
For my model I used small battery powered fairy lights with 40 LEDs. I made different variants so that most common picture formats can be used. The heigt is always 130mm. For the model in the pictures I have used a 3x2 picture. For…
Update 12/2/23 Updated the anchor model with tighter tolerances. Results my vary depending on printer so scale as needed. Added a blank Lithophane that can be used instead of a second image if you don't want the ornament to be double…
/!\ Download the PDF file located in the project files to create your lithophane /!\ This heart-shaped lithophane light frame transforms any photo into a glowing, emotional keepsake. Designed with Valentine’s Day in mind, it’s a timeless…
Attention These lamps are very challenging to print, they consume almost 1kg of filament and take 4 to 5 days per print . Do not start a print without preparation . Print a test model for both, the top section of the lamps and the bottom…
What you need : Create your Lithophane picture here : https://3dp.rocks/lithophane/ Model settings to be set to fit my stand are the following ones : Maximum Size : 150mm Thickness : 3mm Border : 4mm Thinnest Layer : 0.8mm Vector per…
A frame for lithophanes. Designed to work with 5V LED strips such that it can be USB powered. Also provided as OpenSCAD file to allow for customization. To generate a lithophane to insert into it, resize your photo to 4200 * 3150px and…
Lithophane tealight holder I modeled with inspiration from sestosanto on myminifactory . I made the gap between the candle and the image smaller because I found it wasn't lit up enough for my liking (the melted top of the lithophane in…
A nativity scene lithophane bell ornament for Christmas Lights utilized:…
Giving full credit to the original design - this is a remix of this lantern - Japanese Garden Lantern Lamp by Keenan - Thingiverse I printed everything at .15 layer height. I did supports only on the middle section on the openings for the…
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Lithophane Christmas ball made from the Lithophanemaker.com sphere tool . https://lithophanemaker.com/Lithophane%20Sphere.html Just upload a picture which you prefer and insert the settings : *Flip image *Fit image to Sphere or use “crop…
Lithophane Settings added as a Text document Mount v1 & Mount v2 are just for show, so you can view the full model in 3D, DO NOT print these for use. Base: 0.2 Layer Height Supports The hole in the bottom for a lamp is 50mm. Roof: 0.12…
This upload contains three pumpkin variants with spooky lithophane faces . The faces were generated using custom Python code that maps the images directly onto the pumpkin geometry, rather than onto a standard flat, cylindrical, or…
Lithophane Lamp Create a permanent display of your treasured photographs or print a stunning gift for your friends and family. Requires a print bed minimum size 150mm (6 inches). My design is inspired by other similar lamps on…
A lithophane box that holds 4 lithophanes and a 9 led light in the center. Print Settings Printer: CR-10, Prusa MkII Rafts: No Supports: Yes Resolution: .2 Infill: 15% for the box parts, 100% for the lithophanes Instructions and…
Made the top, corners and bottom separate pieces. The corners are a snug fit as I designed them to be glue free but not loose enough to come apart unintentionally. This gives you the option to swap out photos. You can also make them…
Tealight lithopane stand I uploaded a modular and customizable lithophane lamp: https://www.printables.com/model/222458-customizable-and-modular-lithophane-lamp In case you want to change a single lithopane on that lamp, I designed this…
Custom lithophane stand included. This was a test using LuBan instead of my usual applications. It needs work. Software used: Photoshop and LuBan Dimensions: 135xx 133mm x 3.2mm(3.52mm with frame). Print settings and information:…
This is an enhancement of "Snow" Globe Christmas Lithophane from Sebastian that is a remix of "Snow" Globe Christmas Lithophane from Taylor Herrin . I made a base for 3x AA batteries and power switch that you can use to build your own LED…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer and S3D. Dimensions: 176mm x 105mm x 5.5mm. Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a very large and…
This is a quick remix of Bambu Lab's Lithophane frame. The only changes made were: Remove the ‘Bambu Lab’ logo from the top of the frame Added locks for the diffuser plate so it doesn't slip out I've included a 3mf file. Supports are…
Overview This is a lithophane light box that I have designed myself as a side project. To light up the lithophane from the back, an LED strip is attached at the back, with a USB-C connector to power the LED. Assembly instructions are…
Lithophane Dragon Lamp 0.1mm layer hight 35mms printing speed 45mms travel speed
Imagine walking into a UV lit location wearing a picture of Darth Vader or Spock around your neck! It will immediately light up and will show everyone that the Force in fact is with you or you find something fascinating while raising an…
Here i created an Heart shaped Frame with a Love Sign as Stand for the Heart. it fits Heart shaped Lithophanes made by itslitho.com Please hit the Like Button to show some love :) Upload your Makes or Comment if you have ideas to make it…
Redesigned the stand, and added a circular box to hold electric connections and GU10 light bulb fitting.
I was inspired by another stl found on thingiverse which was a heart frame our of Love. So I made a mother's day one. It fits a 65x65 heart lithophane from lithophanemakers.com. A great site. It just requires a little sanding to get it to…
Lithophane stand for 3mmx130mm lithophanes. designed for use with LED tealights found here: https://www.amazon.com/gp/product/B008TLZSKY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
In this project, I used led strip and lithophane photo to make decoration panels. Each module is a hexagon panel and can be used to make different shapes (nanoleaf alternative). For each light panel, you will need 0.5m of LED strip, the…
PLEASE NOTE: If you have a single extruder printer (or a bambu labs) use the file "moon_gems_merged". There are separate files for the moon and the gems for those with duel extruder printers. You will need to assign different material to…
Le socle représente le buste de Spiderman que j'ai modifié pour ne pas avoir de supports : https://www.thingiverse.com/thing:4617147 et mis un système pouvant accueillir un système d'éclairage composé comme suit : * Douille E14…
Create a permanent display of your treasured photographs or print a stunning gift for your friends and family in 100% plastic! The lampstand is parts compatible with my Moon Lamp. Print instructions Make the lampstand Creating the…
Kept breaking the legs on the original model, this one is reinforced and child-proof.
What you need : Create your Lithophane picture here : https://tool.itslitho.com/CreateModel?fbclid=IwAR0KwptkrRXLSwPDUypCAV3w8k17ULX74G8Z11TKp9dzuu6ksr_4rmdf01k#/CreateModel !!! Your picture Size should respect this ratio : 2265x1501…
Edit: I'm currently printing an update I did on the frame so no support is needed. I'll upload that file if it comes out right This is my frame design I made to house my lithophane I made of my wife and I on our wedding day 8 years ago.…
Lithophane: Layer height: 0.12mm Enclosure & lid: Layer height: 0.2mm Used a single strip of 6 LED lights glued to the back of the enclosure. Powered it using a 12V DC adapter, have provided a hole in the back for female DC port. I have…
Star Wars: The Rise of Skywalker Custom lithophane stand included. Software used: Machine Learning (various GitHub based systems/scripts), Photoshop, Blender, Meshmixer and S3D. Dimensions: 172mm x 142mm x 6mm. Print settings and…
This is a lithophane Earth lamp. If you want to create your own Solar System lamps you found the right place! Download the file here and get all the planets with a lithophane affect. What is special about lithophane? Lithophane is an…
This is a Picture frame to Frame a Mini light Box and 3D printed Lithophane image. Mini Light Box can be purchased here: https://www.amazon.co.uk/gp/product/B0767LGTZM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 This is inspired by…
Harry Potter lithophane keychain Hold it up to the light to reveal the picture Print it vertically at a small layer height at 100% infill (I printed it at 0.1mm layer height) Print with a raft if you are worried it might fall over during…
The moon was used on some of my previous projects ( Cat on branch watching moon lithophane - moonlight serenade by Jon | Download free STL model | Printables.com , Owl on branch silhouetted by moon lithophane by Jon | Download free STL…
I love lithophanes and decided to make this Tangled lamp for my friends kid. It looks amazing all lit up. I made the file using lithophanemaker.com and bought the lamp base from amazon. Base- https://amzn.to/2PZ51Kl Filament-…
Because the original .3mf file was not easy to use I sliced it into two seperate bells. There I removed the lower overhanging edge. Now it can be printed very easily. I also made and added here a stand additionally with a hanging option…
Easy to print picture that shows surprise under light! Printing instructions - use white filament! Use either 100% infill or many walls/perimeters Recommended layer height is 0.12 however if you want the most detailed print, go lower.…
