Counting matching models…
This bracket allows you to mount a 40mm fan on the heat sink of the Mellanox ConnectX-4 (heat sink size 45x45x11mm). It is designed with the Noctua NF-A4x10 FLX fan in mind, but other 40mm fans might work. The bracket uses the four stock…
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-3. Untested at the moment, but people were asking for it. Uses M3x12 (ideally SHCS) or longer (the screws should go past the heatsink anyway,…
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2. Uses M3x12 SHCS or M3x16 SHCS. Keep in mind that you're (most likely) printing this in thermoplastic. If you pick a filament with a low HDT…
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
Remixed Citrusper's design for the larger heat sink of the MCX512A-ACAT. Recommend printing in high temp material. Design works great for me, but this was my first design in Fusion 360 so .f3d file is a mess. Thank you, Citruspers! ASIC…
Magic's classic elvish mana dork. Since the original art only shows the head I decided to just put it on the same body. Also I decided to make a version using a bow because that just seems like a model that would be useful to have and I…
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
A quick print to make a low profile bracket for the inexpensive Mellanox Connect-X 10 gigabit Ethernet NICs.
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
This model allows to push the air through the heatsink, it's then expelled at the back of the card, cooling the sfp cages in the process. They're barely warm to the touch with this mod.
This is going to be a very niche model. I will be stoked to get one download. On the other hand, it would have saved me at least a dozen hours if I didn't have to make this from scratch, so… enjoy. I'm using this on both CX4 and CX6…
Prints face down, then whilst still warm bend the end to make the “L” shape for a standard bracket. There is a relief in the model that helps with bending to the correct shape.
Rear panel for the Mellanox Connectx-3 Dual QSFP+ infiniband network card (Model Number CX354A). For the thinkcentre tiny family of micro pcs. Has been tested on an m720q, m920q and Thinkstation P40.
Full height bracket for Mellanox ConnectX-2 with SCAD file for modification. Remixed from https://www.thingiverse.com/thing:3164278 I increased the thickness and added some extra ridges and lips to make the bracket much sturdier. I also…
A low profile slot cover for the Mellanox Connectx-3 CX312B. Activity LEDs are visible. Print parameters: Bambulab P1P Extrudr XPETG Matt Black Layer-Height: 0.12mm Infill: 100% Wall-Loops: 6 With support Assembly: 2x M3x6mm screws 2x M3…
Dell Mellanox ConnectX-3 10Gb SFP+ Dual Port CX322A low profile bracket for Lenovo ThinkStation P330 TINY Desktop PC. I printed quite a few available models and was having different problems with them. So, I ended up just creating one…
Salvaorejas con el texto "NO ESTAIS SOLOS" que es la frase elegida por la Fundación ONCE para su colaboración en todo lo referente a la pandemia de la covid19. Disponible en las 4 lenguas oficiales en España. Print instructions Está…
Citruspers made a good design however I wasn't totally happy with the result. As you can see in his picture, the bracket overhangs from the heatsink and the two claws on the right are in, what I call, a danger zone: SMD components are…
Made for a 4010 blower style fan. The one i have is 5V which i've connected through a USB cable. Afaik it's also available in 12V variant. I cannot tell you if it fits other 4010 fans like this, but the size does seem standard. The fan…
Printed in PETG. I advise against printing in a temperature-sensitive material like PLA because the card can get quite hot. Huge thanks to David Fish for the original design – I love that this can be printed flat then bent for the 90…
Design based on the idea of MC Taz Man. Soon I will create my own insert design where I will include this concept of separating all the villains by decks. These boxes hold the 45 cards of each villain with sleeves. Thanks to the lower…
Se trata de una simulación de la piedra roseta que traduce del egipcio, doblada al castellano. Gran gatget para juegos, Salas de escape, jincanas, etc.
Basic rack mounting rails for a Mellanox SX6036 switch. The switch side rails sit in a groove on the rack side rails, very similar to a French cleat. These are meant to be used as static rails. You will need to print two of each model. I…
A bracket for the Lenovo Tiny computers that is made to fit on the Dell CX4121C Mellanox ConnectX-4 SFP Card. The bracket was printed with the internal part facing down so that the hexagon holes would look a bit cleaner once the supports…
Bellanoir Libero - Palworld Figurine is a video game character figurine STL made for 3d printing and display collecting. Print it for tabletop gaming, desk decor, shelf collection, or as a diorama centerpiece that brings the Palworld…
Cuatro anillos con las siguientes configuración de letras: ABCDEFGHIJ EFGHIJKLMN KLMNÑOPQRS QRSTUVWXYZ
A simple fan support bracket for the Mellanox CX311A. I used a spare 4010 24V blower fan from an Ender 3 printer. The 24V fan allowed me to connect it to 12V, making it spin very slowly, yet it was still able to cool the card effectively.…
Paied with this fan, with the wider exit https://www.amazon.co.uk/dp/B0BNZH39TJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Bellanoir - Palworld Figurine is a video game character figurine stl and 3d printable model for collectors who want a Bellanoir display piece inspired by Palworld. Ideal for desktop and shelf display, tabletop crafting, and creating a…
Mellanox ConnectX-3 dual QSFP+ PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. Use a bit of force to tap the screws.
Tras ver este llavero en inglés https://makerworld.com/es/models/529836-best-teacher-keychain-gift-idea-school?from=search#profileId-446801 quise hacer mi versión al gallego, y ya puestos a las demás lenguas oficiales de España. Dejo el…
Escudo del club Villanovense
Printed with PETG with 6 walls and 25% infill Loose fit to heatsink, but works
Collection of brackets for Mellanox Connectx4 brackets QSFP and SFP, low profile and full height
Decidí hacer este remix ya que ocupaba poner un poco en orden mis cartas del villanous pero queira algo un poco mas a mi gusto, modifique los espacios internos para que las cartas no quedaran tan sueltas, retire la abertura lateral ya que…
Simple mount fan mount for LR-LINK LRES1054PF-2SFP28. (2x25Gbit Connectx5 NIC)
llano cm3 fujifilm np-w126s battery charger cover
Multicolore Spanish pride heart "Orgullo" by request. This file contains the heart split into parts so each can have it's own color following the pride flag.
Cooling fan mount designed specifically for the Mellanox ConnectX-2 MNPA19-XTR network interface card. The mount is built to hold a standard 4010 blower fan (turbofan) Print instructions Print vertically, without supports. Stop printing…
This is a reversed (upside down) PCIE bracket for using the ADT-Link M.2 Riser Extension Adapter. The current version is specifically designed for the Mellanox ConnectX-3 10GB NIC card that I needed to connect through my M.2 slot. But can…
Printed in PETG. I advise against printing in a temperature-sensitive material like PLA because the card can get quite hot. Huge thanks to David Fish for the original design – I love that this can be printed flat then bent for the 90…
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
Probably fairly niche but I wanted to mount this on the wall: https://www.amazon.com/dp/B09PT97CQK?ref=ppx_yo2ov_dt_b_f Surface mount with Command strips etc.
3D printable topographic miniature of Puertollano - 🇪🇸 Spain Capture the beauty of Puertollano 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 38.690, -4.109…
Multicolor license plate frame I made for a buddy of mine. Nozzle .4mm Layer height .2mm PETG for heat resistance
