1 / 1
Mellanox ConnectX-2 40mm fan bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2.
- Rating
- 4 / 5
- Likes
- 25
- Downloads
- 247
- Makes
- 1
- Views
- 2,308
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2.
Uses M3x12 SHCS or M3x16 SHCS.
Keep in mind that you're (most likely) printing this in thermoplastic. If you pick a filament with a low HDT like PLA, you run the risk of screws falling out due to the bracket softening from the heat. Use this at your own risk.
I printed mine in ABS.