Counting matching models…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
I was unable to find a CAD model for this specific TTGO module so I made my own. The dimensions and the placements of the components should be fairly accurate but there could be a slight difference. If you've got any questions or…
Created this because I wanted my mesh node to hold power if I need to move it. Started with the base from @Shred's to make my mods. I'm unsure of the current power draw, but should last at least 4h (no wifi) Required Hardware: x1 380mAh…
Modified case for lilygo T3 meshtastic module with 3000mAh battery and small PRG_button.
3d printed housing for TTGO LoRa32 V1.6. The model was printed with a 0.4mm nozzle, ABS carbon plastic. List of hardware: Battery 603035, 700mAh Din912 m2*5 - 2 pcs. Din912 M2.5*6 - 4 pcs. Insert nut m2*3*5 - 2 pcs. Insert nut m2.5*4*5 -…
wanted a portable case for my Heltec lora32 node, while still allowing a usb cord being plugged in or a solar charger. held together with screws and includes sma pass trough:
Minimalist case for Heltec LoRa32 V2/V3 Compatible with Heltec LoRa32 V2 and V3 boards Space for a battery up to 30 × 50 × 20 mm (see the last gallery photo) Perfect for MeshCore and Meshtastic projects Integrated mount for a standard…
Remix of jeepers01's TTGO Lora32 T3 Slimline Case that can be mounted to a flat face. Also features an enlarged USB-Hole
Print tips: Lay the faces of the surfaces flat on the build plate. If you have a well dialed in printer you will not need to use supports. If you don't, use tree supports. Please see the readmes in the original. You may want to increase…
This 3D printable case is designed for the LoRa32 module (ESP32 with LoRa and OLED display) and includes space for a 1300mAh Li-Ion battery . The design offers protection and portability, making it ideal for outdoor or mobile IoT…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it…
This is a mock up of the LoRa32 V3 board from Heltec. I made it to test some fitments for a project I am working on and used the official DWG from Heltec to model it. It's a pretty barebones mock up, but it also includes the header pins…
Box to ttgo-lora32 to Meshcore mesh the box have space to put a lipo with 2000 mAh
This is a fully 3D printable enclosure for the LilyGo TTGO LoRa32 board used in Meshtastic nodes. The enclosure provides internal space for a battery and supports the use of the board’s native antenna connector. The slide switch and reset…
Created this because I wanted my mesh node to hold power if I need to move it. Started with the base from @Shred's to make my mods. I'm unsure of the current power draw, but should last at least 4h (no wifi) Required Hardware: x1 380mAh…
Added a battery holder for 103565 3000mah battery. Its friction fit. "Fixed" by screwing in antenna. Holds pretty well. You can add some foam between battery and the case, if tolerances are too big. My first model, I was learning in the…
Modified case for lilygo T3 meshtastic module with 3000mAh battery and small PRG_button.
3d printed housing for TTGO LoRa32 V1.6. The model was printed with a 0.4mm nozzle, ABS carbon plastic. List of hardware: Battery 603035, 700mAh Din912 m2*5 - 2 pcs. Din912 M2.5*6 - 4 pcs. Insert nut m2*3*5 - 2 pcs. Insert nut m2.5*4*5 -…
A remixed case for the LILYGO LORA32 T3, ideal for MySondy GO
A remixed case for the LILYGO LORA32 T3, ideal for MySondy GO
simple case that fits a slim battery and some sensors you might want to have if you need to customize https://a360.co/4poeBnF (2026-01-03 fixed the link) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…
I was looking for a minimal case for the Heltec LoRa 32 module. The cases I found either also offered room for a LiPo and a power switch, were not designed for the new solid LoRa antenna, or the module just did not fit properly. So I…
Snap-fit case for TTGO LoRa32v1. Tested for version 1 of the device. The case is snap-fit so its better to print it from less brittle material... e.g. PETG.
TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…
Case for LilyGO TTGO LoRa32 without battery compartment. Currently needs glue or elastic bands to stay close.
This is a frame for the Heltec WiFi Lora32 module. Has opening for buttons and OLED display. I recommend to print it with supports, so the grove for PCB is clean. The model is parametric, you can make the frame as big as you need.…
I've found that the Heltec LoRa32 boards do not operate on Bluetooth correctly when powered only by USB power, regardless of the USB power source and its ability to deliver correct USB voltage and current. The Bluetooth connection drops…
I designed the model to be able to be printed on its back without supports. Here is a link to the battery that I used https://www.aliexpress.us/item/3256802096150819.html. You can see from the pictures that it does have the same snug fit…
A simple case for the LoRa32U4 devboard including space for the battery and an SMA pigtail
Handy case for LoRa32 V2.1_1.6 which you can mount to laptop lid. Has antenna opening big enough to hold Jiaxing Beyondoor Electronics antenna BY-2400-05-03-868MHz.
Remix to allow an 18650 battery in a suitable holder to be accommodated in the back of the case
A retaining post to keep the Heltec WiFi LoRa 32 V3 to one side of the Deenlai FSH710 "IP66" junction box. Refer to images for layout. Requires an SMA Jack Adapter for Deenlai FSH710 IP66 Junction Box , a DC-DC buck converter (3.3V or 5V,…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
A small, slim enclosure for the Heltec WiFi LoRa 32(V3) . Press-fit, no supports required. To minimize size, there is no SMA mount; antenna pigtail just hangs off the enclosure. Still trying to find a way to keep this design small while…
A case for the TTGO Lora32 which makes it a more useful portable device, with the intention of using it as a pager. It has three buttons on 12.7mm centres (can be done on perfboard), space for up to a 40 x 60mm LiPo and a 9.6mm piezo…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
