Counting matching models…
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
Versión 2.0, es más delgada, más larga y se adapta mejor a los muelles. Impresa en PETG. Capa inicial 0,3 resto de capas 0,25. 15% relleno Version 2.0, it is thinner, longer and fits better on the springs. Printed in PETG. Initial layer…
Just a really cool axolotl. And their sibling the less cool axolotle. (With and withotu sunglasses)
Done during the Covid pandemic. Take a look at the pics, it's all there. There's a OpenSCAD file available. Print it and use it! Stay safe.
This is my design for a filament spool holder that will fit any 20mm wide V-slot rail. You will need to drill holes for mounting either through the sides or through the top (drill from the inside when drilling through the top) Use with…
This model takes the original K9 head and slots a hole to fit standard Dummy 13 accessories in the “mouth”. Prints without supports. Print flat on the “top” of the head (i.e. the side with the ears). The 3MF is laid out correctly.
Gedruckt aus ABS mit 4 Wandlinien, 0.4mm Linienbreite, 0.16mm Schichthöche, 20% Infill
First: A Warning This plotter was designed for a specific event, as it is the only thing it can draw is “BS5” so if you want it to do anything else you will have to make the cams and you should not assume that this will be easy If you…
Przelotki mają pierścienie o średnicy 63.5mm Do drukowania potrzeba zastosować podpory w gniazdach XT60E-F Są dwie wersję.
This scan was collected with a Creality CR Scan 01, so the result is a bit rough. It sufficiently captures the geometry to allow re-creation in CAD. I have not tried to create that model - the geometry has multiple sweeping arcs that…
A String Lotus Flower Artwork. Print at 0.24mm layer height. If you are using Bambu Studio you need to change your wall generator to Arachne.
This is a very simle print to organise your towels on the radiator. Quick installation, no drilling or gluing required. It can be easily hung Any position on the radiator at different heights and any time intervals.
My wife commented that we didn't have a removable “ashtray” in our new Honda Pilot for small misc trash like gum wrappers, receipts, etc. so I modeled up a small bin to fit in the front center console next the charging pad. For best…
Jeremy and Garth of Jaded Parts came up with a great idea for a snap-on two finger (or three!) trigger attachment for the Professor Motor controller. I like their design much better than my own two finger trigger for that controller,…
Minor changes to the original moved the top clip down a few mm to hold the controller more securely raised the plinth for the grip a little for the same reason I also added a 3mf that puts two holders in the space of a shelf for the…
An improved version of my G2 pen which can be found here: https://www.printables.com/model/491413-pen-pilot-g2-gel-capped The edges were widened to reduce the need for a brim The clip was shortened to make it more robust. Tolerences…
Nachdem ich bereits eine Variante in Holz erstellt habe, nun nochmal das ganze als 3D Druck! Viel Spass beim drucken! Falls der Schieber zu stramm funktioniert, etwas Fett auf die Reibestellen geben. Gerne Bewertungen und Fotos..…
If you're like me and you have fluctuated in size over the years but kept different size clothes still in your closet I designed these simple size hanger dividers to make it more organized. I've done most sizes that will be needed. To get…
Needed a foot to raise my aluminum extrusion off of the floor so I designed and printed a small foot. Connect to aluminum extrusion using a single M5 bolt screwed into a t-nut. My print parameters: Printed in PETG 0.2mm layer height 15%…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Print Duration: 1h 45m 2s Dimensions: a. Model Dimensions Slot Height: 18.8mm Top…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes (base to model only) Print Duration: 1h 5m Dimensions: a. Model Dimensions Slot…
A clamp to hold the 16mm thick sheets like MDF sheets in place on the aluminum profiles with 8mm slot width.
A gantry plate for 3 roller wheels that fits on a 40mm wide v-slot aluminum extrusion. For a full assembly you need: 3 roller wheels with 24mm diameter 1 eccentric nut ID 5mm that fits in a 7mm hole 2 spacers ID 5mm 3 fasteners M5x28 or…
This component serves two purposes: it functions as both a profile end cap and a structural base. To install it, first, tap the profile end hole with an M8 thread. Next, slide the part into the profile slot, and finally, secure it using a…
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
Toy model of a guillotine. This was printed with Overture matte PLA on my Qidi X-Smart. 3mf file will illustrate supports and tolerances, etc. Print the file - Guillotine_pin.stl - 2x. Be careful pushing the 2 pins into the holes of the…
A mental note to myself to slow down. Could be useful for others Created using MakerWorld-Make My Sign Print it face down for the best quality
The original model had too small thread for the fitting, this model fixes that
Perfect Holder for a 25mm Clothing Rail I designed a holder specifically for a 25mm clothing rail, and it works perfectly. Here are the details: Design Features The hook is slightly smaller than the rail's diameter, allowing the rail to…
Solid version uses a lot of filament - 78 gram at 40% infill. And a lot of time too! - 2 hr and 15 min at 200 mm/s. So i created a lightened version for those who want to save time and filament. Lighter version only uses 43g and takes 1…
Filament tag with tag slots for easy id ERCF channel. It can be print with anything, For tags, I suggest you use add text on your tags (ORCA call Embossed text), but cut instead of empossed. Then flip the model to have text lay on the…
Just a simple pen cup that also holds flash drives.
This is a remix of VC Design universal Cable holder. I modified and printed mine so I can use screws to mount it.
Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…
Loved the file made by rpgweb but not being able to use the card in the holder made it to busy during play so made it wider to fit the monster card in its original holder.
This is a pilot g2 reloadable add-on, it inserts inside the cartridge with the button and other thing removed.
Slip the thin end under the braids and around the guide blade to hold the guide steady and your fingers clean while you clean the braids with chemicals and brushes. Use the thick end to burnish down the braids after shaping them. The…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
Ive printed all the parts with 10% infill and only used 4 of the 6 screw mounts. You will need m3 screws and preferably also m3 nuts. The spring can be activated by using a normal household rubberband. Here is a small demonstration video…
I was thinking about other friendly little robots and this guy came to mind, although I am pretty convinced he might join the dark side later as he has a Vaderish shape to him. I normally post a make when I upload a design, but my printer…
Slot width is 1.5mm, spaced at 2mm. The holder uses the universal hook by CSD_Salzburg. My print is PETG, 3 walls, 15% infill. Minimal supports for the bottom curved edges.
A variation on my Benchy Dockyard - just for fun. Each slip holds 10 Benchys - so, you can size this to suit. The Dockyard Tower measures approximately 8” in diameter when loaded with Benchys. You will need the base and one slip to start.…
Introduction After hearing the news that Sillybutts was pausing the development of his Silly Shell kit for the Nerf Pilot i decided to try my hand at the same concept: Introducing the SillyPilot! This kit requires minimal modding of the…
pencils max size: 8 mm pencil eraser size: 19mm x 14mm pencil sharpener magnet size: 6 mm (printed with supports)
Variant of the Divider STL file to have the "click" when mags are inserted for a better lock.
Ikea Besta Clothes rail, works with original IKEA screws Suitable for 20mm rods
Termostat má zkosené hrany, takže v případě, že není pevně namontován na zdi, tak je mírně sklopený dopředu a stabilita není stoprocentní. Pro přišroubování jsem chtěl použít dva krátké zapuštěné M3, ale závity vyšly nějak divně a tak…
Since I have a sloped ceiling, the IKEA Turbo clothing rack is not very space-efficient. To position the rack further to the side, this adapter is designed to shorten it to the desired height. The part shown in the picture is made from…
🧵 Filament recommandés : PETG ou ASA 🖨 Conseils impressions : 4 parois Remplissage 10% Nid d’Abeille 🖥: Fichier STEP & STL 🛠 Accessoires utilisés : 2 vis INOX M4x14 2 écrous en T INOX M4 2 rondelles M4 INOX Support Go Pro montage sur…
SD card dust cover. Fits on Ender 3 v3 SE. or any other model or device that has a sd card slot.
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
RD6012 Backcover with Slots and screw in XT60 male connector (amas). Use some screws to hang it onto a wall.
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
Lotus shaped flower with the core adapted to allocate tea candle. Eternal flower with an eternal flame. *please notice pictures are just recreations of the model.
This is made to replace 2 3.5" slots with 2x70mm fans. This allows you to put things that generate heat in this space. Might require a bit of sanding depending on your pc case. I used Apevia 70mm fans from amazon
If you are here you probably know what this is. Since the original parts ( # B121U0117F ) are quite expensive, and are designed to break every time you have do open up your dash, I designed these ones that you dont need to break in order…
Easter holiday Bunny egg holder This design is meant for Easter holidays, so you can conveniently place your eggs in this organizer. It looks cute and simple and hopefully it will decorate your table at Easter holiday. If you enjoy my…
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty for 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Perimetric reinforcing rib for superior strength Optimized profile geometry – better resistance and easier…
This part will fit ST1000, ST2000, ST4000 and EV100 Tiller pilots The OEM ram end cap G004 is basically cylindrical with a small index line to assist fitting it to the tiller pin. With the standard part, it is necessary to search…
This is my very simple but nice looking SlotClock. It's based on an ESP8266 and ESPhome firmware. It can display time and different animations. Please take the ESPHome firmware as a baseline for future additions. The provided .step file…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Simple parking lot with 5 stalls for 1:64 scale diecast cars. I've used this parking lot with different model sets and they really fill out the scene. Models sliced in Bambu Studio and printed on Bambu Lab printers. Check out my other…
Simple accessible parking lot diorama for 1:64 scale diecast cars. I've used this parking lot with different model sets and they really fill out the scene. Models sliced in Bambu Studio and printed on Bambu Lab printers. Check out my…
🔁 A Bigger Bite, Same Clean Cut This remix of the original Chompie and Nosh takes your can-cutting to the next level! Now with 5mm guide slots , Mega Chompie (top) and Mega Nosh (bottom) allow for precise and repeatable cuts at the height…
Recommended Settings: 3 Walls, 20mm/s slow first layer, NO supports. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised. Feel free to…
Use an M4 screw to set the correct clearance for the pen.
Tokens and staging area for the Lord of the Rings Living Card Game. It includes: Upgrade tokens: Willpower, Attack, Defense, Hit Point and Threat. Countable tokens: Resource, Progress, Damage. Exhaust tokens, which I printed in different…
I loved George's model but wanted something a little more snug. To achieve this, I got the inside dimensions of the Gameboy Cartridge slot and added it to the model base. I also created a tall version for extra protection. Prints with NO…
Dish Soap, cloth and sponge holder. Cloth holder is removable
Hawse Fairlead with adjustable fixing slot 254mm/10" Passacavo per verricello Overall dimensions: 300x67.5x18mm Centre to centre 254mm / 10" Standard Bolt Mount Pattern with adjustable fixing slot Mounting hardware needed M10 / 3/8" bolt…
This is a set of pieces that can be used to recreate the Imperial TIE Fighter Pilot figure at 500% scale. This figure was released in 2015 and appeared in one set: TIE Fighter - UCS . All of the stl files needed to create this have been…
Use double-sided tape or glue to fasten it down. It presses against the ball so the tape/glue is just needed to prevent it from falling off sideways and doesn't need to be very strong. I printed it without supports and had no issues. PLA…
I just started reworking the diceslots in my MegaTray project. It has this slanted top surface which is part of the style, so I needed to find a better slot to hold the dice, then regular round or hex cutouts. You can check the different…
This is a seven blade fan when spread out meant to look like a lotus flower. Each blade is 7 inches long
For you dollhouse dining pleasure Print upside-down, solid model for vase mode, any material. CAD Link:…
My first model that I made and printed myself. It works for my table from Jysk. But if you need some modification just use CAD model in Onshape and modify the sketch to match your table. I used 0% infill and 3 perimeters and works well…
Náhrada plastové části klasického kolíčku na prádlo. Vymodelovány byly tři varianty podle průměru střední části pružiny 5-6mm, 6-7mm a 7-8mm. Tištěno z materiálu PETG bez podpěr, výplň 50%, tloušťka vrstvy 0,2 mm.
Behold this plump, contented porker as he lounges through life with zero hurry and maximum snorts of delight. Decked out in all his rotund glory, Sir Oink-a-Lot is the perfect embodiment of “treat yo’ self” Sir Oink-a-Lot guarantees belly…
4040 Rv2 Series V-slot T-slot Extruded Aluminum - Profiles Collection - Adjust the Z scale to obtain longer profiles Available in 5 variants: 4040 4 Sides Open 4040 1 Sides Open 4040 2 Sides Open (90°) 4040 2 Sides Open (180°) 4040 3…
Provides a place to add attachments to the Core of the Lowrider V4. Like a drag chain or vacuum tube mount.
If you own a Peloton bike and you would like to use a virtual biking app like Zwift or MyWhoosh, then you might want to use a tablet with it. This holder is simple to print and has enough stability to prevent the tablet from falling. I…
I could not find a good free model of a phone mount cubby insert for my Ford Maverick so I designed my own using the 3-D scan data uploaded by https://www.printables.com/@jalcober_222386 . Print face down using PETG or other high…
The house we live in doesn't have a built in towel rack to hang our wash cloth. We used to drape them over the top of the shower curtain rod, but that can stain your shower curtain. The holder drapes over the top of your curtain rod and…
I needed a good way to send 6 bottles to daycare for our little guy. I added an optional ice pack slot. The icepacks we user are the “Bentgo Ice Lunch Chillers - Ultra-Thin Ice Packs Perfect for Everyday Use in Lunch Bags, Lunch Boxes and…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
4040 Foot Cap Low - Floor Mount Base Aluminium Profile - RV2 Series Suitable for: https://www.printables.com/model/1337775-4040-rv2-series-extruded-aluminum-profiles-collect All our designs are free to download and use—because sharing…
Replaces printer toolhead with a mount for a pen to use your printer as a plotter. Print parts in the provided orientations. This is intended to be printed with 0.2mm layer lines, though you can go finer. Parts should be printed in the…
