Counting matching models…
Paris, Louvre Museum, France. These twenty five 3D scans models were generated for the short movie Gloria Victis ( https://vimeo.com/182609342 ) More images here: https://www.artstation.com/artwork/A6doN In this movie, the Cour Marly was…
This is a cover for 120mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
Make your own Low Poly 3D models using my 3D Low Poly Generator ! Check out my Amazon Page to see what kind of gear I use to make these models. This is a remix of 'Venus de Milo at The Louvre, Paris' , found on MyMiniFactory .
This is a cover for 120mm PC cooling fans with a louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous though, you can…
A remix of The3Designer 's 120mm Angular Louvre Fan Grill to fit the 140mm fans. Scaled to 140mm size and added appropriate screw hole locations. If you like the model, support the original creator using his affiliate link.
Continuing with the scenic tour through Paris, here's the glass pyramid in front of the Louvre Museum. Note that this model is a bit underwhelming in regards to size, but it's still an important part of Paris. There are 2 options for…
A/C Vent Louvre Tab - Toyota Corolla 2016 Print with tabs facing up with tree supports if possible
UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely. Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins…
Let your Louvre Light shine. While mapping out Paris on my daughters ceiling, with the main landmarks printed in white to sit on the street map, I decided it needed a proper light. One that is as close to the real thing as I could make…
This is a cover for 240mm PC cooling fans with an angular louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous…
This work is based on "Artemis" (https://sketchfab.com/3d-models/artemis-c143bc34131c404a9c01a160b641299f) by Grégoire Desrousseaux (https://sketchfab.com/g.desrx) licensed under CC-BY-NC-4.0…
This is a cover for 240mm PC cooling fans with a louvre vent design. Besides looks, this fan grill also saves fingers ;) I'd suggest using support material to improve the print quality of the model. If you feel adventurous though, you can…
Pirámide del Louvre: modelo 3D sencillo para impresión 3D en cualquier impresora 3D
Howdy, I wanted to increase ventilation in my office without the risk of rain damaging any electronics as my server and printer are right beside the window. My solution was to print a few ventilation panels that simply slot in together. I…
The AC vents on my '95 defender were broken and had missing pieces, so I created some spare parts to repair them. It is quite fiddly to dismantle them, and same goes for putting them together. make sure to drill out all the holes to 2,5…
Introducing the PC Case Fan Grill, a fantastic addition to enhance the appearance of your gaming rig! This model is designed specifically to cover the extra holes around the fans in your case, allowing for 140mm fan options. It is…
I've got a few landscape spotlights that produce an annoying glare when walking by them. Searching a bit, I found the solution to the problem was to place a louver (or louvre) between the bulb and the lens of the spotlight housing. Many…
atelier-louvre-head-of-aphrodite repost of https://www.myminifactory.com/object/3d-print-head-of-aphrodite-at-the-runion-des-muses-nationaux-paris-14386 Category: Sculptures
Honeycombe Louvre filter for Philips Hue outdoor Lily.
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch Bring one of the world's most iconic museums to your collection with this detailed 3D model of the Louvre Museum in Paris. This printable model…
A fully parametric, user-customizeable louvred vent to keep you cool (and well ventilated)! Most design parameters are fully user customizable using the OpenSCAD customizer (Window > Customizer). Almost any design parameter including the…
These parts are designed for the FreeWing Fa-18C 90mm EDF. These are scale parts to replicate the forward fuselage vents, louvered vents and antennae. You MUST preform ‘foam surgery’ for many of these parts which will violate MotionRC and…
My gift to you this Halloween season. Haven't thought about what you want to dress up as? Need a last minute costume? I got you covered. Throw on a black hoodie, black pants, and a construction vest. Then just print out this necklace, put…
My air conditioner was blowing not enough air into my room, and what air it was blowing was blowing at either a cupboard or straight out the door. The air conditioner vent is an Advantage Air with the vent itself having outer dimensions…
The Death of Saint Innocent at the Louvre
Print Notes: No support needed. Layer Height All bar the flaps, 0.2 mm Flaps, 0.1 mm (0.2 works, but 0.1 give better outcome) Extrusion width Set to 0.4 on all, otherwise the mesh will not be generated., also watch out for elephant foots…
I designed this louvre vent cover for a 60mm fan, as I needed one to fit on the underside of a vehicle mounted Starlink pod. Can be used for any opening that fits a 60mm cover. Recommend using some mesh to make it critter proof. Designed…
Putting this here for other people to use. Solidworks part included if you wish to make modifications. I printed with 3 wall loops and 25% infill. I have noticed no sag with reasonably full bins, but be cautious.
Replacement A/C Vent Louvre Tab for a 2011 Toyota Corolla. Installs in place. Printed in PETG, with tabs down and organic tree supports.
atelier-louvre-relief-cut-2 Category: Sculptures
Ensures the sensor is kept away from radiated heat while providing plenty of airflow to ensure the temperature and humidity readings are accurate. Mount suits Pimorony BME280/BMP280 (or similar breakout boards). The enclosure is held…
Drucken M5 Gewinde schneiden Passende schrauben länge raus kramen Anschrauben Fertig Print Settings Printer: Self Made Rafts: No Supports: No Resolution: 0,2 Infill: 100% Filament: keine Ahnung Billig halt... PLA grey Notes: If you have…
This is a printable louvred intake vent kit for adding passive airflow to an outdoor storage box, garden cabinet, tool chest, shed panel or DIY enclosure. The outer vent uses angled louvres to help reduce direct rain entry while still…
Infill: 20% Material: PLA/PETG wont matter maybe i should've used a new vent instead of old :)
This is a parts storage box to fit onto a louvered panel. I print them in multiple colors on my XL, but you could paint the model to indicate the contents.
This is a scale model of the Louvre area of Paris, France, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
Remix for 120mm_fan_grill_louvre_angular with extra margin(circular, normal)
I wanted to mount some part bins to a wall but all the mounts you can buy are for several bins in one big panel. This is a single bin mount for when you only want one or a handful of part bins.
Designed to hold small humidity/temp sensor (in my case the si7021) with louvered front to protect them from direct sun etc whilst still allowing air flow. The back is friction fit, use a little glue to secure. I haven't added any holes…
Replacement part for a louvre, fitted for the side with the chain. Print with lots of perimeters, many solid top and bottom layers and a lot of infill. Tested are: 4 Perimeters, 8 top and bottom layers @0.15mm layer height, with 40%…
A clip that can be combined to create lamellar fencing between posts. Created to build a fence that was both light, easy to assemble, modular and easy to maintain. This kind of fence provides privacy and allows wind to pass through, even…
cord weight easy to print WITHOUT ROLE/WHEEL! you need: 2x m6 screws 2x m6 nuts Print: 100% infill without support
louvre abudhabi coaster
Needed a shim to make these shims from Amazon to work with a normal fence board without sticking out.
Aerogarden cap with louvres to allow water vapor to rise for plants that prefer higher humidity. The purpose of having louvres instead of an empty hole is stop algae growth on parts of the grow deck that are hard to clean. Some algae may…
The cover of our louvre / jalousie has yellowed over time. I've created an additional cover without replacing the old one. It will be mounted on top of the old cover. The cover is available in two different lengths. You're able to add…
THC_w0134_radRightShutrNoFeedbk and THC_w0130_radLeftShutrNoFeedbk error messages on Tesla Model S. Usually the error is caused by the flaps being broken due to the flimsy original design. This is a 1:1 copy, but with an improved center.…
To minimize falling dust/particles a set of skirts with louvre vents
Similar to my other model, but now with louvres. This should prevent direct solar radiation on the sensor and hides the electronics inside. For best results, I had to add some supports like on the picture below, the rest prints ok (on…
Pirámide del Louvre: modelo 3D sencillo para impresión 3D en cualquier impresora 3D
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…
Print Notes: No support needed. Layer Height All bar the flaps, 0.2 mm Flaps, 0.1 mm (0.2 works, but 0.1 give better outcome) Extrusion width Set to 0.4 on all, otherwise the mesh will not be generated., also watch out for elephant foots…
This is a parts storage box to fit onto a louvered panel. I print them in multiple colors on my XL, but you could paint the model to indicate the contents.
A clip that can be combined to create lamellar fencing between posts. Created to build a fence that was both light, easy to assemble, modular and easy to maintain. This kind of fence provides privacy and allows wind to pass through, even…
3D printable topographic miniature of Paris, Louvre and Tuileries - 🇫🇷 France Capture the beauty of Paris, Louvre and Tuileries 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…
