Weather Station Louvred Sensor Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
External weather station temperature/humidity sensor enclosure.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 34
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Ensures the sensor is kept away from radiated heat while providing plenty of airflow to ensure the temperature and humidity readings are accurate.
Mount suits Pimorony BME280/BMP280 (or similar breakout boards). The enclosure is held together by three lengths of M6 threaded rod; measure these to length based on the number of sections you want to use. Use washers and locking nuts on each end to hold the enclosure together.
To build Print one of each component with 10-15 of the temp-sensor-enclosure-plain sections. These can be added or removed to your liking; I used 13 for mine.
Place the sensor near the middle with the top/bottom rings on either side before adding the plain ring sections to put space around the sensor and to keep it roughly in the centre before completing the enclosure with the top and bottom caps.