Counting matching models…
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Model made in fusion 360. I used to Sunlu PETG Silver Silk edit. I paste final model. And g-code for 0.4 nozzle .
A, 2 part, spring clamp for my kitchen sink gloves that uses a 4mm dia. by 25mm long pen spring for tension. Designed to work with 15mm of travel. This clamp is specifically designed for the dimensions of my kitchen sink counter, but I am…
There are these useful gadgets you can purchase from the hardware store to keep your work gloves with you when you are not wearing them. Typically, a small clip that attaches to your belt loop and a larger clip that attaches to your…
I remixed these for my nephew, who is a marvel fan but just 4 years old. The original hands are way to big for him so I made them 75% size of the original (opening of the wrist is 75mm) and added a handle bar inside the glove so he can…
These are 3D printable glove adapters that you can use for your projects that will allow you to add a hole for your hands/gloves to be screwed in place. No supports required and you should be able to rescale these larger or smaller as…
Pendant in the shape of the boxing gloves. 20% infill. Printing with supports.
i used the model from sketchfab to just select and clean the model a bit to be able to 3D print just the gloves since I didn't really want to spend money on some model, so I made it by hand and allowed other people to also use it. oh and…
Take out some stress or just fidget as you think with this miniature punching bag. Built using a 24mm long, 4mm OD spring I got from a pen. Used tape to stick to secure to desk. For sizing the gloves, what worked for me was using calipers…
Recently I bought my mum gloves with claws for the care of flowers in the garden but the available size was too big. So i decide to use 3D printing, to solve this problem and now the claws allow for comfortable work. After dealing with…
This is a modular version of the Lovesac Sactional Shoe that I designed. I ran into sactional layout that only required 3 holes and would leave the 4th shoe hole sticking out of the couch where it could be tripped on. This solves that…
I have remade this model - please see v2 here. Remix of Wiseone's model to hold gardening gloves and to hang them on shed's wall. The original model was made to clip to a belt so I remixed it. Printed on PETG at 0.20mm 25% infill (15%…
As a kickboxer, I wanted to have an accessory related to martial arts.. so here you go :)
A wall mount holder for a nitrile gloves package.
Designed to fit the angled or standard side insert of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, basket/remote holder, and shallow tray. Model includes wood grain texture. Pictures show the angled side version…
When I saw this cute French Bulldog on Thingiverse (thanks yuchiayeh), it reminded me of my Son and Daughter-in law's dog, Moosie. I decided to remix it into an air plant holder as a gift to the attendees at their wedding shower. (Theme…
Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…
This a remix of the fist for Lucky 13 and a Boxing Gloves keychain by AnthonyM . I printed mine with black PLA and painted it with red paint. Print with tree supports, 0% infill, touching buildplate only. For the left hand, just mirror…
Lovesac Couch Cup Holder This was made for the Lovesac sactional set that has the standard-shaped sides (not the rolled arms). Print Settings I used 20% infill and supports with it being printed cup-hole-side down. Category: Household
Want to print something unique to decorate your car with? You can use some braided string or a beaded chain to hang these boxing gloves from the rear-view mirror. The creases on the glove pick up nicely in the light, especially with some…
Power Hub for Sactional sofa. Fits into the side piece of the Sactional Sofa. Fits 2 inch round power adaptor. I installed this adapter into the power hub: https://www.amazon.com/dp/B07R3YT3M2/ref=cm_sw_em_r_mt_dp_U_9HMLEbHCQFTQK Print…
Layer height: 0.2 Filling: 10% Wall thickness: 1.32 Material temperature: 200 (PLA from print to batch) bed temperature: 60 Flow: 100% Speed: 60 recomended Supports: Yes
This is a safety pin to use in crocheting or knitting, when you put your work off and want to avoid damaging it. I made it for my wife. Works fine when printed with PETG, it is more elastic than PLA. Please better print it slowly to…
An angled cupholder for the newer style angled sides/backs for Lovesac Sactional couches. I used organic supports for the 2 overhangs, 3 perimeters, 15% gyroid infill.
A simple tube with ventilation holes to make your boxing gloves dry faster. You obviously need to print one for each glove. This model can be customized by adjusting the parameters in OpenSCAD.
Cookie cutter with the shape of gloves. Suitable for baking Christmas cookies. Vykrajovátko ve tvaru rukavice
Designed to match my Tiny Mission/Craftsman Side Table , Mission/Craftsman Chair , and Mission/Craftsman Bookcase (all of which you can see in some of the pics here), this Mission-style sofa makes a nice addition to this miniature living…
This can be rescaled however you want and do need supports.
minion loves mom view in full color 3d here: https://skfb.ly/6uL9H Category: Sculptures
Kids come home from Muay Thai. This allows the glove to open up more so it dries out faster and smells less.
Wall Mount Box 7cm or 5cm Disposable Gloves. The second version has a hole in the front for easy installation. Soporte para caja de guantes desechables 7cm o 5 cm. La segunda versión tiene un agujero en el frente para una fácil instalación.
A cupholder compatible with the square arm Lovesac couches. It has about 2mm leeway on the arms to allow for printing error without making it a loss and it doesn't hurt the functionality. Added in my new design which uses less material…
Impression sans supports, le porte gant optionnel est à coller sur le support principal. La “boule” est dispo avec logo BMW
Hang a disposable gloves box using the Ryobi Link storage system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of the cleat remixed from SemaphoreSlim 's Cleat for Ryobi Link .
Need to explain another printer purchase to your wife? Well this might just help you convince she that is well worth investment. :D Make your wife happy with this combo. Case for AliExpress Silicone Pastry Bag Tips. Case is stack-able…
Since those crappy cardboard disposable glove dispensers always seem to be destroyed by the time I get them - I made this parametric dispenser with a snap-on lid. I used 3 walls with a 15% infill. Pictured is PolyLite Pro Gray PLA. I'm…
Winter has come and the children are outside all the time. They only come in briefly to eat at lunchtime. The robe drips every time. And the space on the towel dryer is tight. Towel dryer? There is no room for towels here! :D I designed a…
A piece to keep your boxing gloves opened and breathing to avoid mould and bad smell. No supports needed. For an upgraded version, please considering using some cooling fans and this design:…
I saw RobC's model for his Disposable Gloves mount for Ryobi Link, but unfortunately my box of disposable gloves didn't fit. I made a new design from scratch, inspired by his, to hold my Harbor Freight HARDY brand gloves (which come in a…
Věšák helmy, rukavic, kalhot, bundy, atd… Otvory pro vruty 5 mm.
LATEX RESCUE GLOVES POCKET
Ideal to go shopping in the store and have enough spare gloves during these days of quarantine. It is printed in two parts and a cardboard tube of toilet paper is reused. The first part is the container/dispenser structure and the second…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Good morning, Welcome to my profile, full of models and miniatures :-) I have beautiful snowmen for you as Christmas decorations. My children love them and paint their gloves, hats and scarves. They are also suitable for decorating the…
Adds more room for you to be able to clip the side of the couch to the base much easier.
A universal and configurable dispenser for gloves as well as wet wipes such as multipurpose cloths or disinfecting wipes. Downloads: On this page, you can download three different holders with different configurations. DM all-purpose…
This is a model of the Lovesac Sactional Shoe that holds the pieces together. I have not printed this to verify that it works due to it being just over the bed size of my Prusa MK3S. Measurements for the model were taken from an original…
I remixed this gloves for fitting a lego miniature
Just a quick and simple, low material use bracket to hold Nitrile glove box
Version 1.0 of a very specific all-in-one model made for my Lovesac “Sactional” that tightly slides over the arms of the Sofa. Cup-holder is large enough (Ø3." x .900 deep) to house most cups from tumblers to beer cans. There is also a…
On my last ski tour I missed to put my gloves together. So I designed these clips where they could subsequently hooked in the loop.
Included long and short sizes for the glove holders. I recommend using just the long one. Scarf holder for buffs / neck warmers. Designed for mounting using adhesive tape on the inside of closet doors. Printing: The glove holders are…
Smaller fit of the nitrile glove holder to fit standard duoShield glove boxes.
This holds a smaller disposable gloves box and allows attaching to the wall with 3m strips. Inner dimensions: 77mm x 95mm x 155 Let me know if there's any other sizes or adjustments that would help you! Printed on my Prusa Mini with…
My toddlers were losing the recliner remote multiple times a day. The final straw was when a family friend found it at their house. So I designed this model to hold and tether the remote. I found a generic strechy keychain on Amazon and…
Print it out on its smallest face or however you want. There are recessed grooves on the back for 10mm 3M VHB tape to stick it to the Lovesac Angled Cup Holder.
Same as the original except the holes are for 16mm rods to fit the metal tubes that came with my Lovesac
Using Tinkercad, I combined the boxing gloves and carbon 13 hand joint to make boxing gloves, my printer is broken (and probably forever) but I would recommend using PVA for supports, because there is complete overhangs and in small gaps
designed for a Wuerth (Würth) nitrile glove box (23,5x12,5x7,5cm) Mounting is with glue or double sided tape Update 20/12/22 I added the holder for mounting with Countersunk and for Lenshead.
I found a model of the Lovesac Sactional coaster on Thingiverse a while back, and thought it was a great idea. The author had made it slightly lower poly than I would like (a Tinkercad export), so I went into Fusion and rebuilt it from…
Some years ago I bought a shoe dryer from Clas Ohlson (Article Number: 44-2542) for drying my diving gear, but the glove dryer that came with the shoe dryer was too cramped and short for my diving gloves and hood so the dryer got packed…
This fits disposable gloves box which is sized 113*43mm. I tried several brands and they all fit perfectly. Biltema begboard has 4mm holes 12mm abart. Biltema operates in Skandinavia, but there are other brands with same dimensions and…
This is a cup holder for a lovesac sactional. I built this to hold a coffee cup plus our TV & surround sound remotes that we kept losing. This fits a Samsung remotes. I also threw in a phone holder as well.
Remix of Wiseone's model to hold gardening gloves and to hang them on shed's wall. The original model was made to clip to a belt so I remixed it. Then I reworked model to improve printing performance and usability. Printed on PETG at…
Print Settings Material: Several Type Pla Nozzle: 0.4mm Layerheight: 0.2mm Top fill pattern: Hilbert Curve Color Changer - Z layer height First Color: 0.00-1.60 Second Color: 1.60-2.20 First Color: 2.20-3.00 Post Process Not necessary
Models for Ketherics Gloves / Gauntlets I printed them in flexible Varioshore TPU Knuckles and finger plates are not included yet.
Something to carry all my snowboarding equipment in one hand.
Wireless charging dock compatible with Lovesac sactional couch Compatible with round wireless charging pucks with a diameter of 98mm or less and a thickness of 10.5mm. You can get a wireless charger with a thickness of up to 14mm if you…
Designed and tested by volunteers from SOMD Loves You. A local non-profit organization formed in Southern Maryland, USA. For most up to date version of this design, as well as a full technical data package for other related files and…
This is a Lovesac Sactional shoe with the outer dimensions scaled down to fit onto a Prusa MK3S. Leg holes dimensions are the same as an original Lovesac Sactional Shoe.
Wall mounted dispenser for Kirkland/bulk-sized glove boxes (9.5" x 5" x 3"). 3mm wall thickness. Mounted with 1.3mm thick adhesive strips. Split into 2 parts for ease of printing and then glued together.
I printed with 3 walls and 15% honeycomb infill (infill combination turned on) with .1mm layers for aesthetics in ASA. Print vertically.
Prints quick without supports, assembles quick, holds MedPride glove boxes. Category: Hand Tools
I created this glove box holder for the Ryobi Link system after trying another one that didn't fit the boxes of gloves I have. I used the Ryobi cleat designed and shared by SemaphoreSlim . Cleat for Ryobi Link by SemaphoreSlim | Download…
Fits boxes of gloves measuring 75mm x 50mm. Compatible with standard 1" spacing and 1/4" holes.
Designed to fit the standard side of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, and basket. There is a problem with my remotes falling into the basket and since I redesigned this to print better on a smaller…
Gridfinity Box for rubber gloves or small 50cl bottle of water Remix from a 2x5 that Im unable to find anymore Thinkercad link: https://www.tinkercad.com/things/8MvcNU4OsqO-gridfinity-small-gloves-bin 2x2 - stackable
If you own a Sactional, you may have tried re-arranging in the past, only to find out that what you envisioned was not as simple as it may have seemed. Maybe you've gotten to the finishing touches and realized you didn't have all the…
I adore my LoveSac couch BUT the cats kept losing their small toys in that scant 1 inch space under it and I could never get them back. So between the need to clean underneath the couch and a desire to regain my under couch storage, I…
A wall mounted holder for disposable rubber gloves. Mounts with two screws in countersunk holes on the backside through the opening on the front. Printed in PLA, infill 30, brim and support everywhere. Gcode is provided.
This is a Jesus Loves You sign in ASL with the words beneath it. You can either print as a whole whole piece, or print separate pieces that can be sized up since the whole piece can only go so big on most plates. The pieces have…
In efforts to organize my space I created this item for a honeycomb storage wall. It is a bit oversized for my box of gloves to take other brands.
Easy to mount with a M6x12 screw
A traditional loveseat for a dolls house or architectural model. It's 11.8cm wide, but resize to a suitable scale for you. Print all in one colour, or two colours. See also the armchair.
https://www.lovesac.com/products/sactionals-l-shoe-dark-walnut Use the Sactionals L-Shoe for AnyTables that are placed in a corner, or next to Deep Seats, to avoid the corner of a regular Sactionals Shoe from showing.
For multicolor printing, 3 colors recommended. One for black coin body, second for red parts, third for eyes. Dimensions: diameter -> 34 mm, 2,2 mm height. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 **Rafts:** No Supports:…
Print 1 left and 1 right for each holder
This customizable side table for Lovesac Sactionals is designed to slide onto a square side to provide a more stable flat surface and protect your Sactional cover. STL, SCAD, and 3mf files provided. No supports necessary for printing. The…
Um die herumliegenden Handschuhe besser bei der Hand zu haben… Verbesserte Version, die äußeren Halter etwas breiter für mehr Stabilität To keep the gloves lying around easier to hand…To keep the gloves lying around easier to hand……
Lovesac Sactional center shoe to set up a couch with individual lounger seats with sides (side-seat-side-seat-side).
A traditional loveseat for a doll house or architectural model. It's 10.5cm wide, but resize to a suitable scale for your needs. Print with fuzzy skin for best results. See also the three seat couch and the armchair.
This wall mount is designed for storing boxing gloves in a simple and compact way. The model uses very little printing material while still providing a strong and durable structure. The geometry avoids thin protruding parts, which makes…
We needed some replacement feet for our outdoor Sactionals, and after finding a replacement “shoe” ( https://www.printables.com/model/48745-lovesac-sactional-shoe ), I decided to go all the way and design this replacement foot, too :)…
I needed a place to but my PS5 controller without loosing it and thought mounting it to the cupholder would be awesome. It is very convenient and is a perfect fit cradle. I included the outline for the cup resting area if you would like…
Artie Mid Century Modern loveseat. Print all in one colour, or print the frame and cushions separately in different colours. Use carpet tape or glue to secure the two parts. See also the Artie Chair.
Very nice model of winter gloves. Remix consists of creating a pattern on the heatbed side as well. ** Moc hezký model zimních rukavic. Remix spočívá ve vytvoření vzorku i na straně heatbedu.
Glove dispenser disposable gloves No Support neded PETG rated
![[Parametric] Lovesac Sactional - Square Side - Top Table](https://media.printables.com/media/prints/f406ce33-9684-4978-b477-4e9b9372049a/images/10648143_4fbd61ed-23c9-47f8-a574-fdbd11d6cb17_27d5313f-0001-465e-ab87-fed8b7a1363c/table.jpg)
