Counting matching models…
This is a modular version of the Lovesac Sactional Shoe that I designed. I ran into sactional layout that only required 3 holes and would leave the 4th shoe hole sticking out of the couch where it could be tripped on. This solves that…
Designed to fit the angled or standard side insert of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, basket/remote holder, and shallow tray. Model includes wood grain texture. Pictures show the angled side version…
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Same basic shape as the Lovesac cup holder for the more square arm rests. I added improvements: Recess for mug handle, but still enclosed to capture spills Two spaces to store phone and remote. I printed with a wood PLA. Used organic…
Lovesac Couch Cup Holder This was made for the Lovesac sactional set that has the standard-shaped sides (not the rolled arms). Print Settings I used 20% infill and supports with it being printed cup-hole-side down. Category: Household
Power Hub for Sactional sofa. Fits into the side piece of the Sactional Sofa. Fits 2 inch round power adaptor. I installed this adapter into the power hub: https://www.amazon.com/dp/B07R3YT3M2/ref=cm_sw_em_r_mt_dp_U_9HMLEbHCQFTQK Print…
An angled cupholder for the newer style angled sides/backs for Lovesac Sactional couches. I used organic supports for the 2 overhangs, 3 perimeters, 15% gyroid infill.
A cupholder compatible with the square arm Lovesac couches. It has about 2mm leeway on the arms to allow for printing error without making it a loss and it doesn't hurt the functionality. Added in my new design which uses less material…
Adds more room for you to be able to clip the side of the couch to the base much easier.
This is a model of the Lovesac Sactional Shoe that holds the pieces together. I have not printed this to verify that it works due to it being just over the bed size of my Prusa MK3S. Measurements for the model were taken from an original…
Version 1.0 of a very specific all-in-one model made for my Lovesac “Sactional” that tightly slides over the arms of the Sofa. Cup-holder is large enough (Ø3." x .900 deep) to house most cups from tumblers to beer cans. There is also a…
My toddlers were losing the recliner remote multiple times a day. The final straw was when a family friend found it at their house. So I designed this model to hold and tether the remote. I found a generic strechy keychain on Amazon and…
Print it out on its smallest face or however you want. There are recessed grooves on the back for 10mm 3M VHB tape to stick it to the Lovesac Angled Cup Holder.
Same as the original except the holes are for 16mm rods to fit the metal tubes that came with my Lovesac
I found a model of the Lovesac Sactional coaster on Thingiverse a while back, and thought it was a great idea. The author had made it slightly lower poly than I would like (a Tinkercad export), so I went into Fusion and rebuilt it from…
This is a cup holder for a lovesac sactional. I built this to hold a coffee cup plus our TV & surround sound remotes that we kept losing. This fits a Samsung remotes. I also threw in a phone holder as well.
Wireless charging dock compatible with Lovesac sactional couch Compatible with round wireless charging pucks with a diameter of 98mm or less and a thickness of 10.5mm. You can get a wireless charger with a thickness of up to 14mm if you…
This is a Lovesac Sactional shoe with the outer dimensions scaled down to fit onto a Prusa MK3S. Leg holes dimensions are the same as an original Lovesac Sactional Shoe.
I printed with 3 walls and 15% honeycomb infill (infill combination turned on) with .1mm layers for aesthetics in ASA. Print vertically.
Designed to fit the standard side of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, and basket. There is a problem with my remotes falling into the basket and since I redesigned this to print better on a smaller…
If you own a Sactional, you may have tried re-arranging in the past, only to find out that what you envisioned was not as simple as it may have seemed. Maybe you've gotten to the finishing touches and realized you didn't have all the…
I adore my LoveSac couch BUT the cats kept losing their small toys in that scant 1 inch space under it and I could never get them back. So between the need to clean underneath the couch and a desire to regain my under couch storage, I…
https://www.lovesac.com/products/sactionals-l-shoe-dark-walnut Use the Sactionals L-Shoe for AnyTables that are placed in a corner, or next to Deep Seats, to avoid the corner of a regular Sactionals Shoe from showing.
This customizable side table for Lovesac Sactionals is designed to slide onto a square side to provide a more stable flat surface and protect your Sactional cover. STL, SCAD, and 3mf files provided. No supports necessary for printing. The…
Lovesac Sactional center shoe to set up a couch with individual lounger seats with sides (side-seat-side-seat-side).
Made different variation to hold snacks or a Chromecast remote
We needed some replacement feet for our outdoor Sactionals, and after finding a replacement “shoe” ( https://www.printables.com/model/48745-lovesac-sactional-shoe ), I decided to go all the way and design this replacement foot, too :)…
I needed a place to but my PS5 controller without loosing it and thought mounting it to the cupholder would be awesome. It is very convenient and is a perfect fit cradle. I included the outline for the cup resting area if you would like…
I made this for our sectional armrest. It matches the cupholders you can buy from lovesac, but has a notch cutout for the handle of a mug. I printed it with Elegoo wood PLA and plan to sand it. I printed it with the “side” of the model on…
Needing to work from the couch for a bit, I wanted to continue using a mouse instead of a trackpad. Should fit modern series 6 Lovesac standard sides and be relatively compatible with any generic mousepad around 20 cm x 23 cm. Uses about…
I was struggling finding an appropriate spot near my couch for my portable scanner. I designed this up in fusion for the radio and other storage for a can. Could probably scale up 1% for a little more room as the fitment with the radio is…
Created to solve the problem of putting a coffee mug in a lovesac cup holder. Two versions are included. An “ember” version that has a deeper setting and a “short” version that seems to work with all the normal ceramic coffee mugs in my…
What is is It's a liquid-catching coaster insert for Lovesac Sactional Drink Holder arms. Why you'd want it The standard drink holder arms for the Lovesac Sactional system have a felt pad in the bottom of the recess that is intended to…
I printed this with 4 walls and 15% gyroid infill. I'll update if it breaks.
Risers are about 2.5 inches tall and intended to be used in addition to the wooden feet that come with the couch. Also included are risers for individual feet. Recommended settings: 3-4 walls, 15%+ cubic or gyroid infill
If you want to move a sactional into place as a chaise lounge temporarily you are left with the large shoe sticking out (aka the toe mangler) once you move it away. So I came up with these easy piece that fits around the foot and between…
Print this off to add 1x4 and 2x4 Gridfinity storage to the arms of your Lovesac couch or chair! This is the flat, not rounded, lovesac. I used the gridfinity standard that allows for magnets, hopefully one less thing for your cat to…
When we purchased the LoveSac Sactional we had to decide between the drink holder and the coaster accessories. This insert is designed to place in the drink holder to allow for coffee cups, handled cups or larger cups like the coaster…
What are these? For those who aren't familiar, Lovesac is a furniture company that makes modular sofas which they call Sactionals . To help in planning your modular sofa, they also produce these little wooden blocks that magnetize…
I scanned my Lovesac sactional cup holder with a Creality Raptor scanner. I love the way the wood grain is visible in the scan! I haven't printed it yet, but it should be a trivial print with a bit of support.
Basically, I found if I combined 50mm + 75mm pieces for each shoe/foot, it was the perfect height for my vacuum robot to clean under my lovesac couch!
This model is a Lovesac compatible tray for remote controls. It is a fairly arbitrary size, and can be stretched as needed. We've knocked remotes off the arm rest of our Lovesac one time too many, so having this tray that resembles an…
After our wooden block set mysteriously disappeared, I decided against buying a replacement set and decided to print a new one instead, especially since the wooden set doesn't include a deep seat back which is part of our configuration.…
Drink coaster insert for LoveSac Sactional drink holder. Coaster is reversible to elevate large handled drinks like coffee mugs. Slight interference of foot wings loosens a bit over time and makes for a stable drink surface.
Embed either a 5x3 keystone panel, or a power grommet into a lovesac side. The mount is designed to intended to attach under the cover to hide, and the panel is removable if the M3 screws are removed. I created this on my own using…
Press fit the charger into the print. You'll need supports. I printed top down.
Easily customize for your needs
Angle side dual remote holder for recliner remote.
Tall drink holder insert for the Lovesac drink holder. Fits Mexican Coke, Fanta, Sprite bottles, ICE carbonated water, etc There are 2 Lovesac sactional drink holders on the market. The original design, and the new design release in the…
Print this off to add 3x4 and 4x4 Gridfinity storage to the arms of your Lovesac couch or chair! This is the flat, not rounded, lovesac. I used the gridfinity standard that allows for magnets, hopefully that means one less thing for your…
Designed to fit the angled or standard side insert of a Lovesac couch. Includes cupholder with mug cutout, cell phone holder, basket/remote holder, and shallow tray. Model includes wood grain texture. Pictures show the angled side version…
Risers are about 2.5 inches tall and intended to be used in addition to the wooden feet that come with the couch. Also included are risers for individual feet. Recommended settings: 3-4 walls, 15%+ cubic or gyroid infill
Warning! I've printed these, but have not yet tested them with the couch to verify that they have enough structure to hold up against the weight of the couch during usage. -------------------------------------- I wanted a way to change…
This is an accessory my wife had requested so she could set items in it and not have them get eaten by the couch or easily knocked off the side. Recommended 3 walls and ~10-15% infill. Fits nicely on a standard profile sactional.…
Designed this cup holder for my LoveSac angled sides sectional Holds large coffee mugs without issue and prints with no supports needed Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Resolution: 0.4 Infill: 15%…
![[Parametric] Lovesac Sactional - Square Side - Top Table](https://media.printables.com/media/prints/f406ce33-9684-4978-b477-4e9b9372049a/images/10648143_4fbd61ed-23c9-47f8-a574-fdbd11d6cb17_27d5313f-0001-465e-ab87-fed8b7a1363c/table.jpg)
