Counting matching models…
This is an IMMOBILE vent insert. It is meant to replace all moving internals via friction fit. Printed in PA612 CF (probably overkill) but fits nice and snug. I suggest painting in your supports just along the louver edges. The client…
I've replaced the stock CLS49-350-24 power supply from my Creality K1C because it was very loud. The swap with MeanWell LRS-350-24 is very simple because the Creality power supply it's a clone of LRS-350. After replacing with LRS-350-24,…
The original design was well constructed, although it was purposed for the 04-06 model. For this version I revised some of the corners and made it so the cupholder frame sits almost flush with the inner frame of the automotive trim. It…
Use 92x92 fan for this upgrade
I needed a rear door speaker mounting bracket for the Lexus LS430, as the Mark Levinson sound system is dead and I did not want to bother fixing it. Decided to basically tear it out and replace it with all new sound system. For the rear…
Mounting bracket to mound a BrightSign LS425 or LS445 to the VESA mount on the back of a screen. I used 3m knurled inserts for this project. 8mm long, 5mm diameter and M3 thread. If you want to do something else it should be easy to…
not up to scale or perfect…have fun lexus LS fan boys.
The vent blades in my 2005 LS430 were loose and not in sync. I measured the shattered pieces of the connectors that were broken and printed these. Depending on tolerances in your case you may need to adjust the size of the holes. I've…
Rolladen-Schneider LS4 Glider Wall Art Silhouette model. Adjustable size. I accept model suggestions. If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to…
Mounts for the Gilbert Engineering XLS450 Flake 46" Mounts. This uses 1/2" EMT. If using the center mount, print two There are mounts for the right and left side bottom and upper. You could use these without the center or with. If using…
Support pour telephone et tablette de 10" max. Permet de charger le telephone dessus.
Speaker adapter for any 6.5 inch speaker for the front door woofer. This adapter uses the stock mounting points and bolts, as well as utilizes the factory wiring plugs.
Put double sided tape or a bit of a foam for insulation between the cap and the spacer ring.
Shapemodified knob, primarily for LS4a canopyrod. I bet, any other LS glider that came from Egelsbach, will work. The original knob is included. Print Settings Printer Brand: Anet Printer: A8 Rafts: Doesn't Matter Supports: No Resolution:…
This model is a Samsung remote control case. It's recommended to use TPU for printing; attaching it to the surface with silicone double-sided tape will provide a more stable finish.
Took a scan of the driver side corner of the dash of my 2004 lexus ls430. Shows the stock location tweeter grilles that are on there. In hopes to design a pod that flushes a set of 3.5 mids from alpine and have it contour to the top of…
3 M4*20 countersunkheadscrews and 6mm rubberband are required. Have a look @ the pictures.... tells all. Category: DIY
Free but mail at [email protected] to show some love $ Scale LS460/LS600h STL scan GRILLE is 2 peice printable hexagon, only aftermarket grille for lexus ls460 or LS 600h FULL bodykit included however grille is bread & butter
The original design was well constructed, although it was purposed for the 04-06 model. For this version I revised some of the corners and made it so the cupholder frame sits almost flush with the inner frame of the automotive trim. It…
This mod attaches to one of the sound deck mounting bolts in the rear of the stereo. All you have to do is remove your stereo deck, line this up with the right side hole and reinstall the stereo deck with this. Note: This only works with…
This was designed for those who have an LS430 with an aftermarket stereo deck, specifically those using a beatsonic kit that made my previous design useless, as it could only be used with the factory head unit. Found here:…
My [Samsung 49 inch Odyssey 0.03 ms 240 Hz OLED G9 Gaming Monitor (LS49CG932SNXZA)] JOG button / joystick crapped on me . It seems to be a common issue[…
