120 mm fan for MeanWell LRS-350 / Creality CLS49-350-24 Power Supply (Creality K1C)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement lid for MeanWell LRS-350 / Creality CLS49-350-24 to fit an 120 mm fan
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 98
- Makes
- 0
- Views
- 694
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've replaced the stock CLS49-350-24 power supply from my Creality K1C because it was very loud. The swap with MeanWell LRS-350-24 is very simple because the Creality power supply it's a clone of LRS-350.
After replacing with LRS-350-24, the fan was still loud so I redesigned an old model (used on my old Ender3 V2) to fit the K1C. This model uses an 120mm fan to cool the power supply. And yes… it's a lot more quieter than the MeanWell.
You have to use 4 x M2 Heat Set Inserts (max 4 mm length), I used M2*3*3.2 for the sides of the model (used for screwing the lid to the power supply).
Keep in mind that the CLS49-350-24 uses a 24v fan and MeanWell LRS-350-24 uses 12v to power the fan. Both have 2 wires.
CAUTION!!!
- DO NOT PLAY WITH THE POWER SUPPLY IF YOU DON'T KNOW WHAT ARE YOU DOING. THE VOLTAGE OF THE CAPCITORS CAN KILL YOU!!!
- USING THIS MODEL RESULTS IN THE INABILITY TO USE THE METAL BOTTOM LID!!!