P
PrintablesKriseye
Flylens Strap Straper
This is to replace the unusable Flywoo battery holder by a strap.
- Downloads
- 321
- Likes
- 19
- Rating
- 5
Search results: lyle
Counting matching models…
P
PrintablesVladamyr
FlyLens75/85 DJI O3 VTX Guard
New version is lighter and thinner. Weighs 3g. Weighs 5.5g as opposed to the 2.75g of the original guard. It can be fastened with the DJI AU fasteners or it also has a capture design that should hold it fairly well without the hardware.…
- Downloads
- 283
- Likes
- 17
- Rating
- 5
P
PrintablesRodrigo Sclosa
Flywoo Flylens 85 GoPro Naked Mount
GoPro Naked Mount for FlyWoo Flylens 85. I also add a base for NamelessRC Naked GP 9/10/11. Category: Hobby
- Downloads
- 192
- Likes
- 4
- Rating
- 0
P
PrintablesAndrei Guzga
DJI O4 Pro Air unit mount for Flylens 85
DJI O4 Pro Air unit mount for Flylens 85. Wanted a TPU mount as the original one was cracked in less then a week (bad at flying it seems :) ) You need to use the original M2 inserts from the original mount or other M2 inserts if you have.…
- Downloads
- 162
- Likes
- 8
- Rating
- 5
P
Printablesmaramao
DJI O4 lite Flywoo Flylens 85 75 20mm cam bracket
This is an adapter to fit the DJI o4 lite camera in the 20mm cam bracket of the Flywoo Flylens 75 and 85, use the DJI screws to attach the adapter to the camera and use the screws supplied with the drone to mount the camera to the bracket
- Downloads
- 135
- Likes
- 7
- Rating
- 0
P
Printableslikeablebump
Flywoo Flylens 75 Case
This is a protective case for storing your Flylens 75 in your FPV backpack without fear of breaking it. It has space for batteries under the drone, and an optional small case for the USB cable included with the Flylens 75. I printed the…
- Downloads
- 122
- Likes
- 11
- Rating
- 0
P
Printablesmaramao
Flywoo FlyLens 85 and 75 Walksnail Avatar HD Mini V3 VTX Bracket
I took the “thick” version of Vladamyr https://www.printables.com/model/788874-flylens7585-dji-o3-vtx-guard after asking permission and I remixed to fit the Walksnail mini vtx V3, I reduced the cage height sincethe avatar mini is not as…
- Downloads
- 115
- Likes
- 6
- Rating
- 0
P
PrintablesNoEgoHoliday
HolyLeaf_Hairpin_018
Feel free to adjust the size however you like. Join my Patreon to support my work and unlock awesome perks: 🛠 Commercial Licenses: Get the rights to sell prints of my models. 🚀 Early Access: Download new designs before they go public. 💎…
- Downloads
- 104
- Likes
- 43
- Rating
- 5
P
Printablesrbm78bln
Yet another Fossil Carlyle Gen 5 Charging Stand (Gen 4 as well)
With this one the watch is laying flat on the surface of the magnetic charger which reduces conduction problems while charging. Print instructions Category: Mobile Phone Summary Well...what to say? So I created another one...too... The…
- Downloads
- 98
- Likes
- 7
- Rating
- 5
P
PrintablesRodrigo Sclosa
FLYWOO FLYLENS85 V2 FRAME FOR 4 HOLES MOTORS
This is a improovement for this amazing drone. You can use it with 4 holes motors (9x9mm) with increases the motors your can use with it. I also added slots for common battery straps. You can print it 3D with PA12CF15 filament or you can…
- Downloads
- 84
- Likes
- 7
- Rating
- 0
P
PrintablesKnickfinger
VTX Bracket for FlyLens 85 with Walksnail Mini+Moonlight 4K Upgrade Kit
VTX Bracket for FlyLens 85 with Walksnail Mini+Moonlight 4K Upgrade Kit
- Downloads
- 84
- Likes
- 2
- Rating
- 0
P
Printablesjak
Lyle Thompson
Lyle Thompson is a Haudenosaunee professional lacrosse player from the Hawk Clan of the Onondaga Confederacy of the Six Nations of the Grand River. His native name is ' Deyhahsanoondey ', which translates into 'He's Flying Over Us'. He…
- Downloads
- 76
- Likes
- 2
- Rating
- 0
P
Printablesidesofmurch
Personal Sized Ring Planner Page Divider - regular and flyleaf
.4 mm thick divider for Personal Sized 6 ring binder. Should fit PERSONAL (6 Rings) That use the follow paper size and Ring distance. 171mm h x 95mm w Ring distance: 19 - 19 - 51 - 19 - 19 mm The dividers itself is 172mm x 95mm x .4mm…
- Downloads
- 59
- Likes
- 17
- Rating
- 5
P
PrintablesMrWhite
Flywoo - Flylens 75
Hallo, hatte mal wieder Lust ein kleinen Whoop zu testen und habe mir den Flywoo Flylens schon fertig direkt bei Flywoo gekauft. Bei den guten Preisen mit Rabatt ist es günstiger die Drohne fertig direkt beim Hersteller zu kaufen. Ich hab…
- Downloads
- 54
- Likes
- 0
- Rating
- 0
P
PrintablesUserA1
Flylens85 Strap Holder Plate
First I was intrigued by Flywoos TPU strap System for the Flylens85, but after receiving my drone I was annoyed by it. So I designed this Plate to be printed on an FDM Printer in a 45° angle from the Buildplate with organic Supports and…
- Downloads
- 51
- Likes
- 5
- Rating
- 0
P
PrintablesJason
Flywoo Flylens75-85 drone with DJI O3 Air Unit - Cooling Tower
This is a cooling tower I made that blows air up into and out around the DJI O3 Air Unit when you're configuring a Flywoo Flylens75-85 with the DJI O3 Air Unit. This is so it won't over heat while connected to BetaFlight Configurator (or…
- Downloads
- 48
- Likes
- 10
- Rating
- 5
P
PrintablesDanielG
Flywoo - Flylens 75 - Walksnail VTX Mount 14mm
Added more high to this model so thats here is more space to store additional components in between. two models, one with screw inserts and one with heat inserts for the M2x3 , 1x3 print with ABS or PETG ( if its heat resistant enough for…
- Downloads
- 42
- Likes
- 3
- Rating
- 0
P
PrintablesDon McKee
Flyleds Strobe Controller Enclosure
This is an enclosure for the Flyleds.com Strobe Controller board (the current "blue" V4.0 board), which is included as part of the Flyleds "The Essentials" Position and Strobe Lighting Kit . This design was heavily inspired by one of the…
- Downloads
- 42
- Likes
- 1
- Rating
- 0
P
PrintablesTobias Carlsson
Flylens85, runcam thumb pro mount
Print without support and on the side that doesn't have any fillet :)
- Downloads
- 35
- Likes
- 4
- Rating
- 5
P
PrintablesMrWhite
Flywoo Flylens 75 Case-Lid - with Flywoo Logo
The Flywoo logo has been integrated into the lid. Printed with the Bambu Lab A1.
- Downloads
- 33
- Likes
- 1
- Rating
- 0
P
PrintablesmoWerk
Fossil Gen5 Carlyle (triggerfish) USB developer dock
This dock has been designed by Dodoradio for the AsteroidOS community.
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesAlexandru Stan
Flylens75 GM10 Nano GPS Mount
I wanted to get GPS going on my whoop for reasons. I saw the GM10 nano already comes with a cool mount (TPU FLYLENS 85 T Antenna & NANO GPS Mount.STL), but it doesn't fit the existing monopole antenna mounting mechanism on the flylens 75.…
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesBMelani
Carlyle E-Torx SAE Socket Set Gridfinity bin with magnets
This is a Gridfinity 3X2 socket holder that holds up to 9 sockets that are approximately ¾ inch in diameter. This holder is designed to fit the Carlyle Socket Set 3/8 in SAE (1) 9 Pc Set MPN: 610219 or NAPA PN: NPT 610219…
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesJán Kuchár
Fossil gen 5 carlyle solid bumper, cover, protector
this is harder version of cover from HAMMER_T Cover is created for better protection during extreme sports. printed from petg on custom printer layer high is 0,12mm infill 20% Category: Sport & Outdoors
- Downloads
- 19
- Likes
- 1
- Rating
- 5
P
PrintablesFrank
FLYLED Strobe Controller board ventilated case
I made this for a friend's RV-8, after discovering that a case he found for the original controller board was too small. This one fits the current board from FLYLED's (the blue board) and was printed on my Prusa Mk.3s in PETG with the…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesLukáš Peterek
Flywoo Flylens 85 O4 HD - Transport case
I've been looking for a transport case for my drone for a while, so I made this. The case is made so the drone sits with its 04 module inside the case, you can secure it with straps, but it should hold wihtout hem just fine.
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesGreenlight Workshops
SlightlyLessSlim - LED Bar
Based on the SuperSlim - LED Bar by jlauer I used the profile to create end caps and mid supports that are secured by M3x8 bolts and T-nuts. You'll need 2x endcaps and 1-2x mid supports per LED bar From the original: Here's a link for the…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesMikkel K
Polyleader Spool
🎣 Fly Fishing Polyleader Spool / Holder (Support-Free) Keep your fly fishing setup organized and completely tangle-free on the water! This custom-designed spool is specifically made for storing and managing polyleaders. Whether you're…
- Downloads
- 8
- Likes
- 3
- Rating
- 0
P
Printables
Flyleds Strobe Controller Enclosure
This is an enclosure for the Flyleds.com Strobe Controller board (the current "blue" V4.0 board), which is included as part of the Flyleds "The Essentials" Position and Strobe Lighting Kit . This design was heavily inspired by one of the…
P
Printables
Flywoo Flylens 85 O4 HD - Transport case
I've been looking for a transport case for my drone for a while, so I made this. The case is made so the drone sits with its 04 module inside the case, you can secure it with straps, but it should hold wihtout hem just fine.
P
Printables
Elysium Carlyle Droid SMG
Built from scratch using reference photos of the "gold" SMG from the Carlyle heist sequence in Elysium (2013) — the desert scene where the droids are carrying them. Every detail was modeled from the film, not guessed at. This listing is…
P
Printables
FLYWOO FLYLENS85 V2 FRAME FOR 4 HOLES MOTORS
This is a improovement for this amazing drone. You can use it with 4 holes motors (9x9mm) with increases the motors your can use with it. I also added slots for common battery straps. You can print it 3D with PA12CF15 filament or you can…
P
Printables
Flylens85, runcam thumb pro mount
Print without support and on the side that doesn't have any fillet :)
P
Printables
Flywoo FlyLens 85 battery strap v2
3D model description Universal strap for Flywoo FlyLens 85. As original ones are compatible only with Flywoo 2s batteries, I designed own one to make possible to attach any battery. Included additional spacers to tighten mount. Length:…
P
Printables
Flylens 85 Battery Strap Mount
Flywoo Flylens 85 battery strap mount with 2 point attachment. Use TPU with 100% infill. For best result print the one with built in support.
P
Printables
Flylens 75/85 850 mAH TPU Battery Holder
The flywoo 75/85 comes with the following battery holders for stick type batteries: 550mAh, 750mAh, 1000mAh. I happened to have a GNB 2s 850mAh batteries from Gaoneng . They would fit in the 1000 one, but they were super loose and messed…
P
Printables
Flywoo Flylens 85 Battery Mount
This is a battery mount that I created for the Flylens 85 to eliminate the fiddly TPU battery holders that Flwoo supplies with the drone. It permits access to the FC USB-C port without having to disassemble anything. It weighs…
P
Printables
Fossil Carlyle Watch Stand
A watch stand charger holder for a Fossil Gen 5 Carlyle, I'm not sure if it works with other smart watches, it uses a 26mm diameter and, 8mm thick charging puck. Wire from the charger is routed through the back and down the spine of the…
P
Printablesscornflake
Elysium Carlyle Droid SMG
Built from scratch using reference photos of the "gold" SMG from the Carlyle heist sequence in Elysium (2013) — the desert scene where the droids are carrying them. Every detail was modeled from the film, not guessed at. This listing is…
- Likes
- 6
- Rating
- 0
P
Printables
Flylens 85 1000mAh Batter Holder
If you have the Flylens85 then you probably know that the battery holders don't actually fit the sizes they say. Remixed into one that actually fits. Enjoy!
P
Printables
Flylens 85 motor wire clip
This is an exact match for the Flywoo Flylens 85 clip that holds the motor wires in place to the frame.
P
Printables
Flywhoo Flylense 85 Battery holder
With this battery holder you can switch batteries quick and easely. It ts printed this with Extrudr TPU but any other tpu or flexible material will also do it. I went for the defoult settings in prusa slicer with organic supports. I am…