Counting matching models…
Eine Wandhalterung um die Makita Grasschere DUM604 aufzuhängen. Bringt Ordnung in die Werkstatt. Ich habe den Halter in PETG ohne Support Material gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like…
This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…
I needed to rework and mount as much of my networking gear as i could which necessitated removing the modem's stand and constructing a wall mounted solution. The most important goal for me was to make the simplest print i could while not…
Just a quick remix to allow herman_v96's multimeter mount to fit an IKEA Skadis board. The universal hook from CSD_Salzburg is also included. Just print the mount and two hooks and you are good to go! Print Settings Printer Brand:…
Skvělá klíčenka od Jacck. Upravená pro změny barev ve vrstvě. Zesílená, aby vydržela hrubší zacházení.
I quickly adapted another badge model by LibDMC to use it with a pin. Model I remixed from: https://www.thingiverse.com/thing:3443374 Print instructions You can use M600 pause function in your slicer to change the color before the bridge…
This is a remix of the excellent RCM jig by Sulya . See his model for instructions. By far, the hardest part of making Sulya's jig was inserting the copper ethernet wire through the holes, so I gave up and just paused my print at 1.6mm…
Edit to accommodate larger Multimeters specifically the AstroAI DM6000AR https://www.amazon.co.uk/gp/product/B071JL6LLL/ Repositioned the cable slot at the back. The continuity ports are accessible however the 10A port is partially blocked
Space is at a premium in my lab, so I keep my multimeter in a drawer and only pull it out when I need it, but it always seems to emerge with 8 other things hopelessly entangled in the cables. This wrangler clip solves that problem for me.…
This is an adaptation of the AstroAI DM6000AR Multimeter Skadis Mount for the Honeycomb Storage Wall.
This is a series of mounts for the Lenovo Tiny ThinkCentre M600. I have this old Lenovo Tiny Pc and wanted to mount it under a shelf on my workbench. I looked around and there are some mounts around but none were exactly what I was…
Hello there I decided to update my removable trolley coin key. 50c, 1€, 2€ coins, so they work nice with the m600 command. Simply insert directly and rotate it out to remove. For Settings: I use layer height of 0.22mm and the M600 can be…
Das Teil beseitigt ein grundsätzliches Problem dieses ansonsten perfekten Bandschleifers. Trotz eingeschalteter Absaugung werden bei weitem nicht alle Späne abgesaugt. Damit ist jetzt Schluss :-) Der Staubschutz wird einfach auf den…
A gridfinity bin for holding the AstroAI DM6000AR multimeter and its leads. Includes a gridfinity ECO bin to sit underneath and hold lead accessories, such as different tips.
Use this to attach to a wall or to generic DIN rail mounts (available on Amzon, eBay, AliExpress etc) Has access hole for DIN rail clip release. Integral spacers keep upright when DIN rail mounted and spaced away from the wall when wall…
Imprimé en couche de 0.2mm. 1er changement de couleur : Layer 9 - 1.80mm 2eme changement de couleur : Layer 11 - 2.20mm
I needed a wall mount for my AstroAI DM6000AR. If it works for you, buy me a coffee, thanks.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu Skin…
Doom Keychain with color change
My old modem died on me and I was in a pinch and picked up a Netgear CM600 at one of the bix box stores. Well the darn thing does not have a way to wall mount it. Due to space constraints, it had to go on the wall. After utilizing DDG…
For my Scheppach OSM600 I needed a special angled adapter to fit in the corner of my shop. Therefore I designed a hose adapter which fits on one side on the maschine and on the other to a standard DN50 / HT50 or 50mm Hose. Print without…
Store your CM600 Tools in this nice little Box
I printed it in Petg. Other materials should also work. Can be printed without support.
Designed it to prevent pants from getting black bc of the chain oil. In order not to snap print bolts on a side. I used organic supports, worked like a charm!
A quick bracket for a Lenovo M600 to mount it to the side wall of a table if you have rigid bars. Customize the back smaller hooks to fit the thickness of whatever table or mounting bar you intend on using.
Plastic adapter for Lenovo ThinkCentre M600 and M700 tiny PCs to mount 2.5" SSD or hard drive. Not the same design as the original part but it is designed for easy 3D printing while maintaining the same general functionality. You will…
This model prints with only one material change! The chess board is upside down on the board and the black squares are only one layer thick. You can print it right side up also if you prefer, but you will have to wait till the end for the…
An LED / photoresistor combination is a convenient part for building voltage controlled amplifiers (VCAs). Unfortunately these parts are no longer sold (to my knowledge). So I decided to build my own. Print with black filament (I used…
Noble M600 Speedster as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Printed at 40% infill Made to fit the blinkers seen in the pictures for the original mounting hardware.
Noble M600 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Noble M600 CarbonSport as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Made for the Durst m600 to fit 3in filters above the enlarger lens. I have printed mine in ABS because the bulb on my enlarger likes to get a little toasty.
osVAC Neo M32 adapter for Scheppach OSM600 Should fit any tool with 38,5mm outside diameter
Baby monitor kickstand replacement part. Kickstand with a position lock, like the original. printer: Prusa MK4, PETG, support
Dongle cover for the AttacksharkX3/Kysona M600 mouse Category: Other
Der oszillierende Banschleifer OSM 600 und vergleichbare Geräte werfen nach rechts Schleifstaub raus, der nicht direkt von einer starken Absaugung abgesaugt. Da oft das mitgelieferte Anschlag rechts nicht genutzt wird, damit mal auch…
Simple Halterung für das Venlab VM600A Multimeter für das Multiboard System
Ended up with someone's unwanted multimeter, but but it was missing its battery cover. I modeled a simple replacement cover. It lacks the kickstand functionality, but it's so much better than the piece of duct tap that was holding the…
Ended up with someone's unwanted multimeter, but but it was missing its battery cover. I modeled a simple replacement cover. It lacks the kickstand functionality, but it's so much better than the piece of duct tap that was holding the…
Der oszillierende Banschleifer OSM 600 und vergleichbare Geräte werfen nach rechts Schleifstaub raus, der nicht direkt von einer starken Absaugung abgesaugt. Da oft das mitgelieferte Anschlag rechts nicht genutzt wird, damit mal auch…
Made for the Durst m600 to fit 3in filters above the enlarger lens. I have printed mine in ABS because the bulb on my enlarger likes to get a little toasty.
![Shimano FC M6000 Cover [STEP]](https://media.printables.com/media/prints/428982/images/3554753_40a53932-c8f5-4aff-9135-59d8eff626c3/screenshot-2023-03-20-d.png)
