23 models
Collection of screws (ISO 10642 / DIN 7991) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
after downloading lots of nuts and bolts in "ISO Metric profile" and not finding any that fits after print I decided to make my own set from scratch and her is the result for 8mm (M8x1.25 ISO Metric profile) / 13mm spanner
ROUND SHIFT KNOB FLAT TOP M8X1.25 THREAD
Pretty self explanatory, its a bolt with handle and m8x1.25 thread. I printed it at a 45 degree angle with tree support in PLA+ and it held up pretty good. Threads got worn after a few times screwing it in and out of metal threads but…
In this Remixed version of E3Ds “Edition 2” mount, i added an M8x1.25mm thread to the top so you can use Prusas stock PTFE fittings. The clear benefit of the original fitting is, that they are much more durable. The Push-connector in the…
Spüler Schraube M8 x 1,25 links kompatibel zu HE Home Electronics HEDW 44004 vielleicht auch zu anderen Modellen. Bei der Demontage des Propellers zur Reinigung dessen hab ich nicht daran gedacht das die Befestigungsschraube ein…
This enables you to connect a PC4 M8x1.0 pneumatic connector to a M8x1.25 thread (which incidentally is what the Prusa Mini uses). The internal clearance is 4.5mm, which in other words makes it very suitable for a thru-connector which…
This simple adapter has an M8x1 iso metric thread on one side, and a BSP pipe thread G1/8-28 on the other. For reference, the BSP thread is close to being an M10x0.9 thread. Why did I make this? Because my bowden tube kept slipping out of…
need two, printed in PLA 0.15mm structural all standard setting
This is a remix of Emotiva's "Shift Knob with Mazda Batman Logo M10x1.25" . I really liked his design but the automatic shift knob on my 2006 (NC) Miata uses a M8x1.25 thread pattern instead of a M10x1.25 like the manual NB Miata he…
There is a small test piece to check that it is the right size. Print upside down without supports.
It is a big surprise for most who did not assemble "Prusa Mini +" kit that there are actually three bowden tubes involved in the extruder block. One for filament loading hole, another one from extruder output to hotend, but there is third…
M8x1 fitting adaptor for use with professional grease guns - for 8mm linear bushes like LM8UU
Simple adapter to allow single bowden tube from extruder to heat break. It's hard to find M8x1.25 to PC4 quick connect fittings, some vendors on Ali sell them with mixed results. This adapters allows to reuse original Prusa fitting (see…
I had issues with trying to crimp on a Capricorn bowden tube on my mini, so I tracked down and found some push connect air fittings that have matching threads for the mini (tough to find) here's the name of what I found on ebay. [ 1pc…
The inside thread is M8 x 1mm. The thread pitch matches what is on the pinda. I printed with PETG, 0.1mm layers. Default 0.1mm profile but with honeycomb infill. Was able to screw it on without tools. Tight enough fit that it is unlikely…
Due to the tight tolerances you may need to change some parameters. I have marked the most important dimension in the last picture. I used the "dust_cap_17" printed on the Bambulab P1S. Stahlbus brake bleed screw:…
As I had some spare Ikea Besta feets that comes in the box as default leg option I wanted to reuse them to level my Lack Table, which in the end worked great. On my print I used 3 wall loops & 10% gyroid infill, printed in PETG
This model was designed as a replacement for the SIAMP concealed toilet flush rod (tested on model 12S01 / Verso 350). On my installation, the original M8×1.25 plastic rod had broken at the tip , reducing its effective length and making…
As I had some spare Ikea Besta feets that comes in the box as default leg option I wanted to reuse them to level my Lack Table, which in the end worked great. On my print I used 3 wall loops & 10% gyroid infill, printed in PETG
Collection of screws (ISO 10642 / DIN 7991) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
