Counting matching models…
Bosch FSN / Mafell rail guide adapter for Wolfcraft mini clamp Adapter to mount the Wolfcraft mini clamps (part nr 3455100) to Bosch FSN or Mefell rail guides. Cause not all 3D-Printers are perfectly calibrate I've attached the FreeCAD…
This is a part for the original hose adapter for the Mafell MT55 cc plunge-cut saw. The original part is exchanged with this part. This part is for the Festool cleantec hose connect. Dies ist ein Schauchanschluss für den originalen…
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
Ich habe nach einer Möglichkeit für eine spielfreie Befestigung eines Schiebeschlittens an einer Mafell Erika 85 gesucht und diese Gleiter konstruiert. Die Gleiter sind optimalerweise 100mm lang und werden mit 95% Infill gedruckt.
This part is for the Festool cleantec hose connect. This adapter is designed to connect the Festool Cleantec holder and the suction device of the Mafell 135 and the Mafell 185 circular saw. – German Version – Der Anschluss ist für den…
Absaugadapter auf 35mm Standard Staubsauger
MPCNC Primo mount for Mafell FM 1000 (PV). It has a 43 mm Euro Mount that might fit other tools as well. Remix of https://www.thingiverse.com/thing:4827280 by LukeSilver I changed the diameter and length of the screw an the nut, that the…
This is a remix of ThierryM's dust shoe: https://www.thingiverse.com/thing:943963 The motivation for this remix is that when installing a Kress spindle on my Shapeoko XXL, I used a 20mm thick mounting block (…
Mafell Erika to Festool vacuum adapter
3D Printable Mount for the Mafell FM1000 on the Lowrider V4. It's rotated 45 degrees to clear the back of the Core. A Big Thanks to V1 Engineering for all the work he put into the Lowrider V4! Had to modify the Dustshoe slightly because…
männlicher Absaugadapter für das osVAC-System kompatibel zur Mafell Erika 85
Adapter to connect the Wolfcraft Mini Clamps to the Bosch FSN Rail Guide - optimized to be printed in an upright orientation to give it more stability in the direction of the tensile force coming from the clamp. Version 2: I was alway…
Needs to be printed with the big round inset hole for the router downwards. Use some supports to support this in this area as well.
Supports: no Layer-height: 0.2 Infill: 40-50% Material: PLA
This model can be screwed to the underside of e.g. a shelf, so you can store the supporting rails that come with the Mafell Erika.
In order to develop extensions or attachments for the Mafell ‘Erika’ table saw, you need the exact dimensions of the individual extruded aluminium profiles. Since I have already designed these profiles for my extensions, I would like to…
Based on [RS-CNC] Mafell FM1000 by ChuckZombie on Thingiverse. For some reason, my MAFELL FM1000 didn't fit in the original design. I hadn't realized it before but the tool was not "sitting flat" on the 43mm collet, as there was not…
Some parts for the MPCNC Primo with Mafell PV1000. The brush height for the collector shoe should not be larger than 30mm and the width more than 5mm. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Printed with GreenTec Pro Printer PRUSA i3 MK3S 0.2 mm Qualitiy - Vertical 5 / Horizontal 6 Contours "Halter MAFELL" 35% infill - the other two with infill 25% For mounting to MPCNC Burly to the tool holder: 10 pieces M4 x 25 mm For…
I originally designed this crosscut flipstop for my Mafell Erika table saw, but with a few modifications of the slider it can also be used with other fence profiles or even other machines like a drill press or a crosscut saw. Feel free to…
This adapter allows you to use your Mafell or Bosch rail guide with your Skil router.
Przejściówka która pozwala, aby wąż nie haczył przy cięciu, wkładana do oryginalnej obrotowej końcówki, na wyjściu podłączenie końcówki odkurzacza o średnicy rury 36 mm np. MacAllister i inne marketowe.
This replacement dust port adds a native osVAC neo M32 connection to the Mafell MT 55 cc plunge saw. Instead of attaching another adapter to the original dust outlet, this part replaces the complete factory dust port. It uses the original…
Dieses Modell, wurde als Ersatzteil nachkonstruiert und die Passform an eigenem Gerät überprüft. Es passt i.d.R. an allen Zimmereihobeln der Baureihe ZH der Firma Mafell.
prowadnica do szyny zagłębiarki Mafell/Bosch FSN do Frezarki Festool of1400. Należy do wydruku zastosować dwie nakrętki 6mm i dwie śruby 6 mm w celu unieruchomienia prętów prowadnicy.
The standard fence guide of the Mafell Erika tables comes with a peculiar milling groove at both ends. In my case the groove is useless and prevents fixing the fence with a clamp at the end of the fence. So I designed an insert with the…
The standard fence guide of the Mafell Erika tables comes with a peculiar milling groove at both ends. In my case the groove is useless and prevents fixing the fence with a clamp at the end of the fence. To use it as a parallel guide…
Mocowanie do stabilizacji szyny zagłębiarki mafell/ bosch, do zamocowania na ścisku, dzięki czemu nie musimy liczyć tylko na antypoślizgowość gumy po szyną. należy wydrukować dwie sztuki i zastosować w dowolnym ścisku marketowym. pamiętać…
Parts per key 2 x M5 pan-head screws, 25 mm, with nuts (plain or nyloc; set nut_t/nut_clr to suit) 1 x M6 bolt, 25-30 mm, with nyloc and two washers (the bar pin). M5 works at a push also. Print Lie the block on the face WITH the bar…
Needs to be printed with the big round inset hole for the router downwards. Use some supports to support this in this area as well.
I needed a reference for a project I was making for the Erika, so I decided to model the saw in CAD. Parasolid file can be found on Grabcad: https://grabcad.com/library/mafell-erika-70-1 Onshape Link:…
The adapter make with a strong Plastic. The rings make with a malleable plastic.
Description This remix merges and enhances elements from three different models to improve functionality and integration for use with the LowRider V4 CNC and the Mafell FM1000 router. 🔧 Magnetic Dust Skirt Mounting The magnetic hole…
Adapters for attaching a Makita VC4210 dust extractor to Mafell Erika 60 E dust port using the quick connector of the vacuum hose. The same vacuum attachment is also found on Nilfisk Attix 33/44 vacuum cleaners and presumably most similar…
Dovetail mount for a Mafell Erika 70/85 pull-push saw, to be used e.g. to extend the table of the saw using a wooden plate (16 mm in thickness). Print Settings Printer: Flying Bear Ghost 4 Rafts: No Supports: No Resolution: 0.2 mm Infill:…
Ich muss meine Säge leider aus Platzgründen hochkant lagern. Damit das Aluprofil dabei geschützt ist habe ich diesen Schutz entworfen.
Mafell Erika 85 Halter für Absaughaube bzw. Sägeblattschutz zum verstauen an der Wand
zweigeteilter Druck eines Saugschlauchadapters für einen Mafell Bandschleifer und danach zusammen geklebt. two-part print of a suction hose adapter for a Mafell belt sander and then glued together.
