Counting matching models…
I own a DeLonghi Magnifica Evo and let's be honnest, if the coffe is delighting, the coffee bean container is so small you can't put more than 250 or 300g. And you always have to manage half a packet beside the machine, because you just…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
We had problems with coffee grounds molding in the container of our coffee machine. There are other sieves out there, but they are all too loose or/and the grid is too wide, allowing coffee to fall through and also mold. If you're facing…
I got sick of running out of coffee beans all the time, so I created an extension for the coffee bean container. As I am switching from Fusion 360 to Shapr3D, I thought this is a nice experiment in modelling with it. Of course, I did not…
Customizable frame for a magnifying glass. The lock is made with a threaded ferrule. Easy to be printed, is flat and don't require any support
The bean tray of the DeLonghi Magnifica S is small. WARNING: Some people are reporting problems, I printed this without issues but some people seems to experience fitting problems. Take a look at the comments see for yourself. If you…
LED Magnifying Glasses & Accessories holder for: → Honeycomb Storage Wall (HSW) (2 versions) → Multiboard → Skadis → PEG Board For each version there is a with / without hole file. The hole is just to store tweezer or other things below…
Grinded coffee measuring spoon for Delonghi Magnifica s. As I lost the original spoon, I've borrowed an original one. And made a new model, but without needing support. I've printed one with 100% infill.
Descaling Container for DeLonghi Magnifica Evo Enhance the maintenance of your DeLonghi Magnifica Evo coffee machine with this specially designed descaling container. This 3D model offers a perfect fit and easy handling thanks to its…
Grid to place into the DeLonghi Magnifica S container to avoid mold.
This is the ground coffee scoop which comes with the Delonghi Bean To Cup coffee machine. I have measured my spoon from a Magnifica ESAM4200 - this might be the same as used in other delonghi models. Print instructions Category: Kitchen &…
I got two neat "tools" in the same day! I got a RYOBI LED magnifier light and a Revopoint POP2 3D USB Scanner. I like them both. The RYOBI magnifier lens is plastic, so it will scratch easy. It didn't come with a lens cover. Within ½ hour…
This inexpensive 3D printed smartphone stand will allow for a smartphone to be held up while it is being used as a magnifier. This phone stand may be beneficial to someone with visual impairment or someone with limited finger dexterity as…
The old holder for this magnifying glass was broken so here is a new one
I don't want to create a new project for each accessories I create for Honeycomb storage wall so here are all of those I created. Cable box as cable storage (90 and 120mm) Magnifier holder (~85mm) Holder for OWON B38T FreeCAD source file…
This is a handy 2-part print that recreates the housing of a typical watchmakers loupe. It consists of a threaded base and top that will retain a single biconvex lens. It's based off of designs used in the watchmaking industry, with a few…
This is a Magnificent horse bust that I remixed from a horse head to add a support plate underneath, I can be printed really well with minimal organic support. Printer with a 0.4 nozzle 0.12 layer lines 2 wall lines 4 Top & Bottom lines…
ENGLISH : remix of coffee tank extension for DeLonghi Magnifica S https://www.thingiverse.com/thing:6620804 to add the holder of the ground coffee scoop. FRANCAIS : remix de l'extension de réservoir pour Delonghi Magnifica S…
Horse-shaped fridge magnet size: 7cm x 6.6cm 3 holes for magnets (3mm x 1.5mm magnets) file includes layered cutouts
This ring fits directly on your stock dial like this ring for the first version. The advantage is a smoother dialing experience since you dont have a 3D-printed thread. to tighten up, i used a M3x6 screw, but it still sticks out. you can…
I was looking for a drip tray to descale my De'Longhi Magnifica S coffee machine and found this version, which I liked because of its design. I simply removed the feet (otherwise there would have been too much plastic waste to create…
This device increases the area of the LED matrix by 4 times. My idea is to use an expanding light separator. If you print it from a translucent material (and my silver plastic turned out to be a little translucent), then the image…
I designed a good fitting water tray for rinsing and cleaning for DeLonghi Magnifica S. Approx 2.7 L capacity.
Design is heavily based on this model by @HuMa_1372637 , so props to them! Remade their model from scratch to give a little reinforcement to the print as it looked a little weak to me. Install at the bottom of your coffee grounds…
Update: Added versions of the parts suitable for a 5mm armature wire internal “spine”, since I noticed that my original version started getting loose & floppy over time. The updated base mount is simplified to just a stud; for my clamp it…
Same point as the original, this is remixed from ( DeLonghi espresso machine pre-ground coffee funnel cap by Petclaud - Thingiverse ) . Useful if machine is used in a shared area by people that may mistake the grounds funnel as the bean…
A wall mount that fits a typical magnifying lamp with a 0.5 in. / 12.7 mm mounting post that is 1.5 in. / 38.1 mm long. I included two versions, one that is tilted away from the wall 30° (as shown in the photos), and one that is straight…
A nice looking cup tray protection, to prevent scratches for the metal cap tray. You can choose between the clean one, the embossed single color and embossed dual color edition. Happy printing :) How To Print Dual Color (Orcaslicer /…
This is a remix from Lyrylin's "Coffee tank extension" on Cults3d https://cults3d.com/en/3d-model/home/bean-tray-extend-for-magnifica-s and the newer version on Thingiverse https://www.thingiverse.com/thing:4941157 I used the SolidWorks…
Made my own book and magnifying glass for Arnak Category: 3D Printing
Lost Ruins of Arnak is a fun game but I have no clue why half of the game materials are amazing (arrows, jewels, tablets) and the other half is trash. Thanks to Virral for his great replacements for the cheap resource card board tokens .…
Here's why I designed it the way I did: Keep things organized even if the box was stored vertically Fits sleeved Leader cards (but I don't sleeve my development cards) Coins and Resources are split into two trays, one for each side of the…
DeLonghi Magnifica S XL Beans Container, It fits a whole 1kg bag of coffee Beans, with 2 Windows
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These two models are front and rear caps to provide limited protection to the glass on an EOTech Model G33 Magnifier. I've found that, when shooting at the range, the glass collects quite a bit of debris from my rifle. These covers…
The original model is great, but my colleagues and I go through a lot of coffee. So I modified the original model to make it taller, and now the coffee machine can hold approximately one kilogram of coffee. Thanks to the author for the…
This is a protection for stainless steel surface Magnifica
Gasket for Delonghi magnifica S exhaust ——— Joint d’étanchéité pour la machine à café Delonghi magnifica S Afin de résoudre le problème mentionné ici:…
Updated Design: May 2026, improved rigidity Tray insert reduces build up on the bottom of the puck holder, caused by wet pucks. Bacteria and mold growth are reduced, by keeping pucks elevated out of moisture. This also eliminates caked on…
Magnification Throw Lever for Arken EP-5 Scope. This fits any scope with a 47mm mag wheel. Hardware Required. 3mm x .5 x 7mm socket head screw. Printer: MK4S, Filament: Black Prusa.
Da mir das vorhandene Volumen des Bohnenbehälters zu gering war, habe ich nach einer Lösung gesucht, wo der Bohnenbehälter auch stramm in der Maschine sitzt. Ich habe die Maße speziell an meine Maschine angepasst, da es scheinbar…
Four M4-20~25mm screws are required. Grip adapter should be modified for your own magnifying glass. Still needs to improve the design: Screw tip should be larger to secure the base stable. Knobs should be larger for the easy operation.…
Container for descale DeLonghi MagnificaS ( 2 litre +)
One of the most useful tools I have in my workshop is a Clarke SAM170 Desk Mounted Magnifying LED Lamp. I use it as a desk lamp above my Prusa i3 MK2 printer and also as a magnifying glass when carrying out fiddly operations such as…
Supports: No Layers: 0.2 Infill: Grid 20% Filament material: PLA - PETG nstructions: Turn off top and bottom padding 0 layers Perimeters 6
If you need reading glasses and have one of those FPV goggles, you know the pain of only seeing a blurred image on the screen 😓 This little clip let's you use the lenses from one of those cheap magnifying glasses:…
This is to help dispense ice/water into containers that don't fit under your fridge slot, particularly Hydro Flask insulated bottles with a 52mm inner diameter, although it's helpful for all sorts of containers. It's got two slots, where…
I designed a perfectly fitting water tray for rinsing and cleaning. I 3D scanned the machine and reverse-engineered it to ensure a precise fit for DeLonghi Magnifica Evo. Approx 1.6 L capacity.
This model is compatible with the lego system.
This design combines two 4x microscope lenses together to create a stereoscopic 3D macro lens, with 2x magnification and a 5mm stereo baseline. It has been designed to be shot handheld in the field using a flash for lighting, rather than…
This is a magnifying glass holder for the SKÅDIS pegboard from Ikea. Since it's unlikely that you will have the same magnifying glass that I do, I have also included a Step file. I usually model the tabs that fit into the pegboard at 4.8…
This is a pair of mounts/brackets for the Schiit Modi and Schiit Magni, version 3. I liked other models, but wanted to be able to snap in the Modi/Magni on the fly since I do move them between desks sometimes. The models both fit either…
LED Magnifying Glasses & Accessories holder for Ikea Skadis Halter fuer LED Lupenleuchte und Zubehörbox für LED Lupenbrillen HSW and Multiboard Version see:…
For M4x30mm screw and 4 sided nut. For 30.5mm diameter lens. Hole for lens, need to by modified, depend on lens you get for.
If you need reading glasses you might have trouble seeing a sharp image on FPV goggles. With this clip you can attach lenses from inexpensive workshop magnifying glass like these (I couldn't find a place to buy just the lenses). Be sure…
I used a short piece of double sided tape to join the two halves of the lens frame (opposite where it connects to the handle), then scraped away the excess with my deburring tool. The side of the handle with less threads is meant to be…
Replacement for De'Longhi Magnifica S (ECAM 23.210.B). The tab that activates the sensor sometimes breaks and because of that problem I decided to reverse engineer this part.
Should work with any Shiit small chassis hardware. I'm using it with the Magni Heretic. It utilizes the rubber feet to secure it from sliding as there are pockets to accept them. Four screws up to #10 (I used #8) are used to secure it.…
It is a 100% 3D printed optical magnifier. You can find out how to grind the lens here: https://fraensengineering.com/how-to-create-3d-printed-optical-lenses-with-a-3d-printed-lens-grinding-machine/ Here is my video on how to make the lens:
I have a magnifying glass from a helping hand clamp setup. The glass was sitting around on my bench and it wasn't easy to use by itself. I needed a handle. Thingiverse to the rescue. This handle looked about the best.…
This prop magnifying glass has to be glued when assembling. Print the following parts: outer-ring.stl (silver, 1×) handle.stl (black, 2×) inner-ring.stl (gold, 2×) glass-half.stl (transparent, 2×) Assembly: Glue two handle parts together…
Magnifying glass lens holder, lens came out of an old helping hands unit that broke on me awhile back, 60mm lens.
For M4x30mm screw and 4 sided nut. For 30.5mm diameter lens. Hole for lens, need to by modified, depend on lens you get for.
Since I was getting tired of holding my portafilter in place while it was doing its grinding thing, I thought I could invest 12 hours to design a gadget that holds my portafilter for me and saves me 12 seconds. Such smart. Anyway, Im…
Magnifying Glasses - support - Honeycomb storage wall I did for this model: Tungfull Office Store - LED Headband Magnifier Hands Free Magnifying Glasses For Jewelry Loupe Watch Electronic Repair 1.5x2x2.5x3x3.5x8x Lens Loupe…
Make descaling your automatic coffee machine easier with this simple model! Normally, you need to find just the right container to fit under the outlets and empty it multiple times during descaling. With this model, you can collect the…
Created this magnifying glass frame because the original one snaped and it was too thin to hold by any glue fixing. It has 84.8mm inside diameter and 89.8mm outside diameter, but if you need it slightly larger you can scale it in slicer.…
Originaly published on https://makerworld.com/en/@bambooster Check my Makerworld profile for more MAGNISLIDE faces MAGNISLIDE is a must-have accessory for anyone who doesn't know what to do with their hands and can never stay still!…
I wanted a neater more slimline zoom lever for my field target scope so I came up with this. This is designed to fit on Mk1 Falcon T50, its untried on other scopes so I'm currently unsure if it would fit any of the other Falcon scopes. It…
A magnifying glass stand is a specialized tool used by hobbyists and professionals alike for precise and accurate work such as soldering. It consists of a base, an adjustable arm, and a magnifying glass lens. The base of the stand is…
Replacement Magnifier frame for 75mm magnifier len. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: PRITOP PLA Green Notes: May use some hot air while mounting a len. Category:…
https://a360.co/3lQnYSd
Pretty straight forward, I printed it with 3 walls for some strengths. It uses 4 flat head #4 x ¼ " screws. You can also just buy it here.
A tray to easily descale the Delonghi Magnifica S ECAM 21.117.B coffee maker Snap in place, attach a silicone hose witha inner diameter of 12mm and run it to the sink or to a bucket on the floor, then start the descale program without…
I've been looking for a cleaning container for my coffee machine for a long time, but haven't found one specifically for my model, so I made my own. Material : PLA, PETG Infil : 25-30% Perimeters : 3 Layer Height: 0.24
Hello, This is a plate to replace the original plate in poor stainless steel (scratch and rust quickly). I've made two versions, one part and two parts to assemble for little 3d printer (minus than 230cm size). My first print test fit…
This model is compatible with the lego system.
LatteCrema preparation tool holder. print instructions: nozzle 0.6 mm layer height 0.4mm infill 20% walls 3
I made the knob extend out equal length, this way there was less directional torque on the knob and more rotational torque, in an attempt to prevent breaking again. Printed upright with supports, this way the surface of the knob is the…
Cleaning the milk frother adapter is not so easy, so I wanted to have replacements. Use a material which can resist the heat of the water vapor! Especially for the inner part! My first prints were using PLA which is not suitable! Print…
If you ever used the powder option on your coffeemaker you know its quite easy to sill powder all over the top of your bean reservoir. I designed this funnel to be printed in vasemode. If you are using the beans reservoir extension…
Mobile Phone Stand / Handy Ständer Lupe Magnifier Handy Ständer um ein Handy bis zu 13cm über der Oberfläche zu fixieren. Gebraucht wird der Ständer z.B. um die Android App DaVinciEye zu unterstützen oder um das Handy als (Arbeits-) Lupe…
After making the universal wide angle viewfinder v2 you will be left with a single convex lens. This lens in its original housing can be used to make a convenient magnifying loupe to use for examining negatives or focusing on a ground…
Put silicone on the flanges of the big square lid, press it down on the coffee machine and put something heavy on each corner while it's drying. Various heighs are included. The version on the photo is the lowest. Fusion 360 source is…
Glass magnifier replacement frame 100mm. Just printed both parts, base and ring with PLA. Insert the glass lens into the base. Lock it by firmly pressing the ring against the glass lens. Warning : take care to insert the ring with the…
A tiny, wearable magnifying glass designed as a fun pendant for young detectives. Prints support-free and can be attached to a keyring or necklace. Perfect for imaginative play and exploration.
These magnifying glasses are upgrades for the cardboard Investigation Markers in Holmes: Sherlock & Mycroft (aka Holmes: Sherlock Gegen Moriarty). Print instructions 0.2mm 15% infill If you like what I'm doing… … consider buying me a…
For the second time we broke the holder/handle for this magnifying glass and this time not repairable so I designed and printed a new one. Glass is 90mm diameter with 3mm thickness at the edge. Print 2 side and 1 mid. No supports…
A magnifying glass holder for IKEA skadis pegboard. this model uses the hooks from the SKADIS caliper holder with battery shelf from this website:…
A spare magnifier glass for "Richard Scarry's Busytown, Eye Found It" board game. 3D PRINTING SETTINGS: 100% infill.
Arken EPL-4 Scope Magnification Wheel. Hardware required: M3 x 5 Socket Head Screw
This is a elevation scope magnifier for a 30mm scope. Magnifies the numbers on the elevation turret by 3x for easier reading. Assembly: Cut the credit card magnifier to fit the frame. Place magnification piece into frame and then press…
This is my solution for getting my new swing arm magnifying desk lamp attached to my workbench. This required putting a hole in my bench top. I used only a 19.05mm (¾") hole in my test and it works fine. This was designed in Openscad,…
This model is the first accessory for the “BJ2010” system that I've just released. It allows to mount a magnifying lens to a ball joint arm that will allow you to precisely position the lens where you need it. If you wish to reproduce the…
Easy to print finder eyecup with built in 22mm thread for Nikon DK-17M or Tenpa 1.22x/1.33x Magnifying eyepiece. It is also compatible with 22mm thread of KPS and SMDV 1.35x Magnifiers. I'm using 1.22x Tenpa magnifier on Nikon ZF to…
A 3D-printed alternative to the original metal part, which always scratches quickly and looks unsightly. It simply replaces the original part and doesn't require any adjustment. I've uploaded two possible file versions for the color…
Fill out headband with walls. Cut of the support material. For magnifying glasses with a diameter of 27 mm. The top edge should be 40 mm. Print orientation: Credits: Designed with the help of FreeCAD, made possible by the dedicated…
This is a simple magnifying glass holder that I designed while teaching myself Fusion 360. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Inland PLA Luminous…
