Search results: magwell

Flared AR15 Magwell V1.1

AAP 01 magwell

Flared magwell for AAP 01 Hardware: 3.5mm flathead hex screw

Glock 43x/48 Magwell

It works on OEM and S15 mags. I take no liability as this was just a fun project and should be a stepping stone for anyone that is considering a magwell.

AR AM-15 Grooved Magwell Grip

Magwell Grip for the Anderson AM-15 AR, with finger grooves Uses 3x M3x20mm Bolts+Nuts

Magwell Flare for Aero Precision M4E1 AR15 Lower

This Magwell Flare fits Aero Precision M4E1 AR15 Lower with slip-on fit and retention features wrapped around rear. Fit is tight; if printer oversizes part then filing angled contact surfaces should be workable. The rear retention…

AAP01 Magwell

Action Army AAP01 Magwell Hardware needed: 1 x M3 x 12 Flat Head Hex Screw 1 x M3 Nut

Magwell for Glock Fidget Keychain – 3D-Printed Mini Slide-Action Toy

A magwell I created for the Glock Fidget Keychain – 3D-Printed Mini Slide-Action Toy by Rectangle. It will work with the stock magazines because they are friction fit but they don't seat fully. I recommend you download the extended…

Xshot Longshot Half Dart Magwells

To use, print both the left and right halves of either the “Low Profile” or the “Flared" versions. Both of these use the internals from the included X-Shot half length adapter, and both will require some cutting of the adapters…

Airsoft Glock GBB Magwell

A magwell for GBBs glocks.

Xshot MPP Motorized Piston Pump AEB Flaired Magwell REMIX

Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…

Skull Magwell AR15

A magwell with a skull on it

Walther PDP Compact Magwell-Compatible Baseplates

Why Walther doesn't make a polymer baseplate that fits into their magwells is truly beyond me. Their engineers likely could have modeled this in 1/4 of the time it took me and they already have injection mold tooling, but leave it to the…

X-Shot Pro Fury X Flared Magwell

The Fury X Flared Magwell is an upgrade magwell for the X-Shot Skins Pro Fury X blaster. Featuring a pronounced flare and an angled chamfered design, this mod part allows for quicker and easier reloads while retaining the blaster's…

X-Shot Longshot Magwell Internals

For those who want to print RedCowls fantastic xshot-longshot-half-dart-magwells but don't want to sacrifice the original magwell internals. Simply print the slide and two of the locks, put in a spring (I took a spring of a broken pen and…

Flared Magwell for Diana Brushless Blaster

30/5/2024: Added version with lanyard hole 18/1/2024: Increased the width slightly for better first layer adhesion, fixed screw holes that were misaligned. Requires 2 x M2 screws. 4-6mm length

Tippmann M4-22 Magwell AR15 Magwell

Tippmann M4-22 Magwell

Ruger PC Carbine Flared Magwell

I got the inspiration for this from rpf2000. I wanted a Ruger PC9 magwell, but didn't exactly like the design. I created this, with a wider angle, tighter fit, and a smoother look. With this magwell, you will have no problem reloading…

AR15 Magwell Wall Mount

Just a simple AR15 wall mount; no bells or whistles. I wanted a simple yet sturdy mount that I could mount on a wall. All the ones I found either flapped around or tried to be something fancy. This mount fits and locks in the magwell just…

SSP18 Magwell

This is a remix from some Glock magwell and made it fit to SSP18. This SSP18 magwell has lanyard hole. I used M4 x 15

Springfield Prodigy Snap-on Magwell

Wanted a magwell with a little lower profile than the ones I was finding for my Night Stalker with a Prodigy Magwell. Ended with with a snap-on design so I didn't have to change out the mainspring housing pin. Slide it on and snap it into…

Nexus Pro Magwell

cosmetic magwell. based on the one from out of darts.

CZ P10 F Magwell

I have customized my P10F to be a bit more of a comp gun, and I wanted a magwell - however, with the Taylor Freelance Brass backstraps ( https://taylorfreelancestore.com/cz-p10-f-backstrap-alum-black/ ) it was harder to find a milled…

Stryker 2.0 Improved Magwell

Replacement magwell for the Stryker 2.0 with several improvements over the stock version doesn't wiggle when it's locked in slightly wider opening to the magwell lines up with the rest of body 4 walls, 20% infill Depending on how…

Talon mag adapter for generic Nerf full length magwell

Altered CaptainSlug's adapter (from 2019) to fit into my Longshot and Talon mags. Other upgrades have been made progressively (Compatibility with other blasters, various tweaks). No shade at CaptainSlug's design though, I understand it…

SLAB V4 Windowed Magwells

I wanted the windowed magwell made by Palmtopper but their posted files were unfortunately for an older version of the SLAB and are no longer compatible with the latest version of this blaster. In their absence, I took it upon myself to…

Walther PDP PRO/ Q5 Magwell 18 Rounds Bottom

Hier ist der PDP PRO kompatible Magazinboden. Einfach gegen den standard Boden tauschen und schon passen die günstigeren Magazine in eure Pro Version. Eignet sich auch super zum Personalisieren um die Magazine auf Wettkämpfen euch…

X-Shot Motorized Piston Pump Flared Magwell

Enjoy the First ever easy clip-in flared magwell that utilizes the groves in the original magwell to hold it onto your Piston Pump! It adds a nice flare of color to your Piston Pump while also giving you the easy of reloading mid battle.…

[AIRSOFT] VFC HK416A5 Magwell for PTS EMP

(Pardon my english, I am not a native speaker) Tired of wobbly PTS mags in your magnificent 416 ? Here is a solution ! This magwell will hold your mag in place and preventing it from oscillating from right to left into the pew's magwell.…

Angled magwell Neutron solenoid gryphon

im a flywheeler from China,hope you love this remix. ！！！important！！！↓↓↓↓ you must use "Neutron High Rate of Fire Compact Solenoid" from OutOfDart：https://outofdarts.com/products/high-rate-of-fire-compact-solenoid?_pos=2&_sid=c7957b968&_ss=r

hc diana flared magwell

you will need x2 m2 screws to fit it to the blaster.

SLAB Chopped Magwell with Compression Spring

Remixed magwell for the SLAB that converts the mag release retention from cord based to be compression spring based. Print following Silly's original recommendations. The original chopped magwell and mag release are designed by and…

X-Shot Longshot Magwell Hardstop Strengthener for RedCowl's Magwells

MAGWELLS FOUND HERE: https://www.printables.com/model/512021-xshot-longshot-half-dart-magwells I apparently LARPed too hard when reloading my Lonxshot with RedCowl's more flush magwell installed, and managed to shear off both hard-stops…

Friction fitted Magwell for hi capa airsoft gun

Friction fitted Magwell for hi capa airsoft gun

ZWQ S400 Zebra Talon Magwell V.10

The S400 Talon Magwell is a 3D-printed magwell for the ZWQ S400 Zebra Bullpup Blaster designed by Luke Goodman at Out of Darts. Featuring a standard talon magwell with a rear paddle mag release, this part is an upgrade from the magwell…

Stryfe Flared Magwell

Re-hosting some of my more popular designs from Thingiverse. [NOTE V2]: Redesigned the entire foregrip section to fit around the Stryfe magwell instead of forming its own foregrip, along with all the aesthetics. This was originally only…

Tippmann Magwell mini AR15

Tippmann Magwell mini

Xshot AEB Motorized Piston Pump MPP Magwell Plates

Update 9/5/25: Added Smiley and Stern emoji plates. Easy to print plates that friction fit into place. Blank set included so you can add your own logo or design. MPP Improved sights:…

Prism Arms - K-Industries Snap On Flared Magwell [For VFC and Vipertech M4/AR GBBR]

Simple and easy, the screw-less flared magwell gives you a much easier time reloading, while being very low profile and still removable. Print in PLA+ or stronger (Just make sure the material has some flex if you ever want to remove it)…

Mosquito V1 M4 / 5.56 Magwell

M4 / 5.56 mag well for the Mosquito Open Beta v1. You will need a pen spring, m3 countersunk screws, and the same 1.8mm m3 square nuts and low cap m3 nuts that the original mag well uses. Sand and polish the bb feed tube until there's no…

Bk1s/2s talon magwell sleeve

For this conversion you will need either a dremel, hacksaw or flush cutters to make the cuts. You will also need 2x 4mm M3 heat sets and 2x 8mm M3 screws. Keep in mind if you are using talons you will still need to trim/file down the back…

Rush Hybrid-lower - Angled Talon and Nightingale mag compatible magwell

A replacement lower for the Rush by shoelesshistorian. It is compatible with both Angled Talons and Nightingale Mags. It also features an ambidextrous and extended push button mag release. Only additional hardware is a M3x12mm socket head…

Viper S200s Flared Magwell V2

V2. Printed and test fit and working well.

M9 Flared Magwell

This is a flared magwell for an airsoft m9, it requires you to remove the langyard loop from the m9 grip plates (search how) and hammering out the pin holding it in place, !DO NOT THROW AWAY SAID PIN! as you will need it to attatch the…

Savage MK II 22lr magwell safety flag

Added a bottom lip, for upside down storage

Sorrow's Cynthia-Closed Bolt, 35Degree Grip, Magwell Chin, Spring Spacer, Curved Buttstock

Various Cynthia Parts Closed Bolt: Stops the bolt from rotating the entire way around, as well as adding a pic-rail extension for structural rigidity. Includes windows to see the springwell, and meshes with the left side of the blaster.…

CZ 457 magwell insert for 22lr

CZ 457 magwell insert for 22lr

Angled Magwell for Gryphon 1.3

Beep Boop. Uses an Elite dart mag for mag spring, just like the old version! works for 1.3 gryphon not the old version. Need to reprint the grip frame and corresponding trigger cover part. ( I have not tested it with other dart types.…

Xshot Longshot Half Dart Magwells - M3 Heatset Inserts

Heatset inserts (M3 thread, 4mm length, 4.5mm outer diameter, 3.9mm nub)https://www.aliexpress.us/item/3256805034317562.html M3x10mm button head screw See original model for printing instructions. You probably want extra walls so there's…

Angled Talon Magwell for pre 1.3 Gryphon Blaster

Hello! This mostly is put together like a normal Gryphon. But it saves the pain of finding a mag release spring. Instead it uses the head of a Nerf elite dart ( I have not tested it with other dart types. Maybe a waffle head may add more…

SPAMF Reverse Angled Talon Magwell

Posted with the permission of GavinFuzzy. This replaces the standard SPAMF magwell and magazine releases. Side-plates attach with two 4-40 screws each and the release is tensioned with a short length of elastic. Basically I started with…

SBL Xlaxlv magwell

IMPORTANT! if you are keen to use this magwell with LyzaAesthetics' thumbholes stock, please make a purchase from LyzaAesthetics' Etsy and show me the proof of purchase. I'll then release the edited thumbhole stock file that works with…

Bk1s/2s talon magwell sleeve (squared off)

A squared-off remix of KingDeeddee's Bk1s/2s talon magwell sleeve . Instructions to assemble are identical to the original. Print magwell base facing down, with supports.

FLEX365 MAGWELL

“Flush” Magwell for our FLEX365 frame, only fits the 17rnd MagHousing (F-MH365-17)

magwell safety flag

Magwell safety flag for Savage MKII .22lr Visible, indicates empty magwell, does not let the bolt close.

Adventure Force Spectrum Magwell Guide v1

A simple snap on magwell guide for the Spectrum by Adventure Force. Removal of the branding on each side is required before attaching the model. No support is required. Built in support should snap off with some slight force. Be careful…

Nexus Pro Magwell Detent Conversion

This turns the mag adapter on the Nexus Pro into a detent system allowing for mag swaps without needing to touch any levers. I kept hitting the Maxwell release instead lol ENJOY! :) INSTRUCTIONS: Print the parts in the orientation shown.…

Longer Magwell for Mosquito V2

Works with all midcap mags but was specifically made to get rid of the gap between the CYMA Platinum 130rnd windowed midcap magazines. (these https://www.evike.com › products ) looks much better with these mags. Uses same hardware as…

Rapidstrike Flared Magwell

Just another friction-fit flared magwell designed for the Nerf Rapidstrike that's designed to blend in with the shape of the blaster around it. Examples of the mounting point methods can be seen from both Jase3D and BlasterTech, as is the…

Huglu MOHAC magwell

Huglu MOHAC magwell

Tippmann Stormer Elite Handguard and Magwell

This is still somewhat of a Prototype, i can't guarantee it to work and am currently working on a slight cracking issue near the bottom handguard screw. (if u want to Remix it, or can easily fix issues you might find i can send .OBJ files…

Mosquito threaded inserts magwell

Updated the magwell to use threaded inserts instead of square nuts as I had a few issues with them spinning. Also moved the screw holes in the base plate out a bit as I found the heads of the bolts could cause the metal MP5 mags to be…

GP Stribog SP9A3 Clip-on Magwell

Found magwell for TR22 and customized it the way it fits SP9A3 as clip-on. Printed it with PETG, 0.12 layer nad maximum(16 for me) wall loops for maximum strength

Glock Magwell with Mag Release StepFiles

I noticed that there are no Glock mag-wells available as step files out there, so i made one myself. It is tested and does hold magazines, but obviously could use improvement. i just wanted to get it out there to make it easier for others…

Ruger American Magwell

Ruger American STANAG magazine well. Offers a tighter magazine fitment and magwell flare for easier insertion. Tested with Ruger American Gen 2.

VFC_Glock17_Gen5_Magwell

Magwell for glock17 of VFC Umarex. its a tight fit but still could use M3 screw to hold Printer used : Ender3 V3 SE Layer height : 0.12

Magwell Rear Modified for XL Trigger Guard

Easy mod for those running XL trigger guards. The part has been shortened so that it is tight around the factory magwell. The center has been removed and the edges revised so that it fits snugly into place without wiggling. Note: The…

Walther PDP/Q5 Magwell-Compatible Baseplate

Made a simple surface cut so a Walther Q5 SF with Magwell and 15rd Mag inserted fits into the measurement box for BDMP PP3 (220mm x 140mm x 40mm) Use print settings like recommended from the original author. It's important to chose…

Walther GSP 500 Picatinny rail on magwell

Additional Hardware you need for this Print: 2x M5 threaded Inserts (short ones. The max. length shut be 8mm) 2x M5 set screws (optional with a Polymer tip) I recommend the print orientation as seen on the Pictures. In this vertikal stand…

GNK-200 Button Magwell (V1.5) + Rotary switch version

10/2/2024: Updated to work with v1.5 cage, added alternate rotary switch version I liked how OFD implemented an ambidexterous button release to the flycore, so I added it to the GNK-200. Also added my own grip improvements; some knurling…

XShot MPP Flared Magwell (Tighter Fit)

The original part would fall out occasionally. I redesigned this to have a slightly tighter fit and added a feed ramp the front of the magwell entrance. You will need to remove the three screws in the XShot MPP magwell area to spread the…

3GR Sports Tech 9 Magwell klein

3GR Sports Tech 9 Magwell klein

Talon Claw Raider/Side Magwell

A Raider magwell for the Talon Claw. This kit replaces the entire magwell area of the TC, as well as the foregrip and muzzle. I recommend you print the 'RaiderFront' and 'RaiderForegrip' parts at 70-100% infill with Gyroid pattern and 4…

Reversed Angled Talon Magwell for the Gryphon

A porting for the 1.3 Gryphon platform of the reverse Angled Talon magwell designed by Ehdrien. Just like the original there isn't a mag release, only a mag detent so no tactical reloads and you'll need to load the angled Talons…

EQUALIZER - Nerf Half-Dart for Katana AND Talon Magwells

Print orientation like katobu mags. Front and Back on their respective front-/backface. A foamblast style drum spring is recommended though a magazine spring sized for half lengths should work aswell. Highly suggest printing the back…

Diana Flared Magwell adapter

I created two flared magwell variants that guide the mags into the grip better than any other pre-existing modifications I was able to find online. There are two versions: The first is just a flared section. The other, I experimented with…

Nerf Rival Atlas Rear Sight / Flared Magwell

a Rear Sight for the Atlas foam blaster Prints without supports. Optional Hardware: 5x30mm bolt with head no larger than 9mm nut with 8mm wrench flats -OR- secure using 3d printed cotter pin

BPX-BETA-DAM and EMF Magwell

DAM/EMF Magwell option for the BPX bullpup conversion for the Tippmann TIPX.

Hi capa magwell tube boy

You WILL NEED a magwell pin that is at least 1.6in {40.64mm} may need an extra .030 in on the longest dimension Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: Doesn't Matter Supports: Yes Infill: 20% Filament: TTYT3D…

Stinger 9 - Magwell - GETBiG

This accessory significantly improves and enhances the reloading process thanks to its extended funnel design, which allows for faster and more confident magazine insertion. Handling feels more natural and fluid, even in dynamic…

Zinc Magazine Adapter for full size magwells

Pin is a piece of filament Needs a bungee or spring for the paddle Modified from the vikinger design for the 1.0 magazines.

Symmetrical Flared Magwell For Stryker 2.0

Mirrored Flared design

3GR Sports Tech 9 - Magwell groß

Magwell für den 3GR Sports Lower

BPX-BETA-TIPX and Zeta Magwell

TIPX/Zeta Magwell option for the BPX bullpup Conversion for the Tippmann TIPX.

Nerf Elite 2.0 Motoblitz Flared Magwell

The Elite 2.0 Motoblitz is one of (if not the) most popular of its series, and for good reason. However, as a bullpup, I found it annoying to not have a flared magwell. So I designed one. This is a flared magwell that attaches to the…

flared-ar15-magwell-v16-model_Rear

this is a redesign of QwermMakes Flared AR15 Magwell V1.1 but is compatible Gen-3 magazines. this is only the Rear of the "Flared MagWell" so you will need to get the Front frum OwermMakes.

Mag Fed Silly Shell With Magwell

Reloads Like An AK

SPIRIT-H(eavy) - Full Length Magwell Remix

A remix to make the SPIRIT compatible with full length darts and magazines; works pretty well. Included are lower crush flywheels (for Plus motors) designed to work with common full length darts (fat heads). Just replace the similarly…

Caliburn upgrade to use OD: 40mm ID: 36mm (metric) aluminium plunger tube including the new takedown magwell design

CHANGE NOTE 01/18/19 - updated the thing to the latest 3.5 version of the Caliburn using the new and improved MilanCoupler part which holds up much better with the enlarged connection to the EliteUpper part. Also included a ramrod base as…

Talon Claw U Raider/Side Magwell

A Raider magwell for the Talon Claw U. This kit replaces the entire magwell area of the TCU, as well as the foregrip. To make this kit left handed, simply mirror the parts in your slicer. To make this kit compatible with my printed U…

Dart Zone Solo Magwell Mod

I recently picked up the Dart Zone Solo, and I've been experimenting with different types of barrels and that's when I stumbled upon the Twist Barrel Adapter made by Paperskeletons3D. I started by adapting the Pepperbox barrel to work…

Tacamo Blizzard TiPX Magwell

A TiPX / Zeta magwell for the Tacamo Blizzard. Instructions / print settings: Print the mounting points to the marker with 10 walls for maximum strength Use support material Carbon fiber nylon is recommended but PETG will work well…

LHTCU Magwell Elastic Slots

I implemented holes along the front magwell piece to keep the elastic cord in a neater arrangement. There are slots for up to four cords that need to be tied on each side. No supports are needed because there is a thin layer over the…

BPX-BETA-Milsig type Magwell

Preliminary model of the magwell for the BPX which allows the use of Milsig type magazines including Square and Hybrid mags.

G lock magwell tubeboy

had to do it to them Category: Toys & Games

Anglegd Magwell parts for Solenoid Gryphon 1.3

I only uploaded the parts i modified. All other parts will need to be sourced from the Printables-pages i listed in the remix section.

Indra Passive Talon Magwell

This is a passive Talon magwell, similar to the one for the Caliburn made by CaptainSlug. This system uses 2 mag releases, like a wildcard adapter. However, instead of Talon and Katana mags, the two releases work on Talon and full length…

SLAB Blaster Windowed Magwell

Simple windowing of the original magwell - from files at the time of posting this. Added fillets on the window, adding 2 darts remaining in mag index - I never printed this version but assume it will print fine. OOps, noticed someone…

Stryker 2.0 Double Stack Magwell WIP

Stryker 2.0 Double Stack Magwell WIP Feeding has not been perfected yet, but it is useable. I've included the step file so you can remix and improve the model. It's just awesome having high-capacity mags that are so compact!

Dart Zone Max Stryker 2.0 Flared Magwell

The Stryker 2.0 Flared Magwell is a 3D-printed upgrade magwell for the 2024 Dart Zone Max blaster of the same name. This mod part features a pronounced flare and allows quicker and easier reloads than the Stryker 2.0's included magwell.…

Nerf Rapidstrike magwell catch/Release

Just a piece I lost so I made one and put it on here incase anyone else needs it