130 models
Pare main pour VTT. Le sens d'impression est celui donné dans le fichier. Je recommande d'utiliser du PA-CF pour l'impression. Attention, le marquage en rouge sur les photos a été fait avec du collage, ce n'est pas inclus dans le fichier…
Redesign of a Wago mount (from Voron) with embossed labels for my RatRig V-Core-3. It has two countersunk holes 55mm apart for fixing it to Voron's really cool printable DIN clips. I have included the STEP and F3D files so you can modify…
A quick remix of Printit Tom's Riptide Mainsail Glock Holster to include a belt loop for 1.5" belts. The added thickness also adds a thumb rail for easier removal of the pistol. I primarily intended to use this as a costume accessory to…
This remix of the Voron V0.2's Power Inlet Foot is completely unnecessary!^^ As the Voron Logo is on the back on the printer, you will most likely not see it. However… It includes a second body for the Voron Logo. It can be printed with…
Introduction This model incorporates design elements from https://www.thingiverse.com/thing:3082178 which was designed for the discontinued Meanwell NES-350-24 . I like the design for its simplicity, rear-facing AC/Mains receptacle, and…
Why? I needed a slimline mounting solution to mount a Meanwell LRS 100-5 to a 35mm DIN Rail, printable on the limited space of a Voron 0.1 Features: Uses the PSU Brackets of the Voron Trident, privided below Provides a 4 point…
This is a replacement lamp shade for the Walmart “Mainstays” brand floor lamp. My kids and pets kept knocking over our lamp, leading to the original plastic lamp shade cracking and breaking. This is a drop-in replacement for the original.…
Why? I needed a slimline mounting solution to mount a Meanwell LRS 150-48 to a 35mm DIN Rail, printable on the limited space of a Voron 0.1 Features: Uses the PSU Brackets of the Voron Trident, privided below Two part design to be…
The kWeld from Keenlab is an excellent battery spot welder, especially as a desktop unit with the accompanying ultracapacitor bank kCap, the power supply module kSupply, and a compatible server power supply. But as I couldn't find any…
For neatly storing a plug with a cable real.
Repair for handles of the following (cheap) laundry baskets (available at Walmart).: https://www.walmart.com/ip/Mainstays-Flexible-Round-Laundry-Hamper-White/17126957 (note: Not an affiliate link) While the above baskets suit my needs…
The original model featured a hole for a C7 Type connector (The one with only two pins) on one side. Because mine had an plug of the C5 Type (looks like an cloverleaf) it woudnt fit. I edited it so it fits for my plug. For this remix i…
Imported from https://www.thingiverse.com/thing:4542511 Summary Remixed from the listed authors... thanks for the original model. Changes: filled the lettering to the first layer height so the centers of the D, R and Os remain in place…
UK (Type G) Mains Plug Switch Cover with "DO NOT TURN OFF" covers.
Simple cover for the mains voltage switch on Meanwell PSUs, as used on the Ender 3 Pro. Clips in place, no adhesive required. Category: 3D Printer Parts
I made this for my RatRig V-Core3 printers with safety in mind but can oc be used with any 3030 extrusion or similar. 6 Countersunk M3 screws, approximately 6-8mm long 6 Heat inserts It is 4mm thick where it attaches to the 3030 extrusion…
This is a device used by watchmakers to close the lid of a watch mainspring barrel. The model is adapted from commercial versions, but can close thinner mainspring barrels. Part printed in PETG, but PLA and PLA+ would also be good…
A set of protein domains reading able to read DNA and interact with a specific nucleotide sequence. The set is great for explaining the role of the major groove in making the sequence information available from a double-strand DNA…
A Mainsail logo to show off your favorite Klipper UI
take hotglue to mount it
An android/gynoid spine v1.0 model: female, male Hi, I am publishing the android parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
My first attempt at multi-color printing with manual filament change. It is a cap with the Klipper and Mainsail logo. After installing the Klipper, the LCD screen is no longer usable, so after dismantling it, I had to somehow cover the…
From CederB's Description: The kWeld from Keenlab is an excellent battery spot welder, especially as a desktop unit with the accompanying ultracapacitor bank kCap, the power supply module kSupply, and a compatible server power supply. But…
Construction Manual First of all. This is inspired by Chris awesome Mondrian Table Lamp heavily. Therefore I mark this as a remake. He uses 3D printing all the way. As I don't have that many filament colors, my design uses a quite common…
Simple mounting solution for your Raspberry Pi zero running Mainsail. :)
It is my first ever dual color print. Made a dual color version and added also a single color version stl. It is just an easy dual color test print which ist't very big.
Added a zip folder with two files in it, the files need to be added to a new folder in mainsail, name the folder .theme and insert the two files and save it, you will now have a KLP mainsail theme. This is working for Orca Slicer.
There is also a second slot for e.g. a headphone cable. Not difficult to print. Print it lying on the side without supports. Has been working great for me in PLA now for months.
Bsa meteor mk5 mainspring compression tool I use it with a Silverline 613111 sash clamp Must be printed at 100% infill in the upright position. 0.20mm layer height I use pla for it without any problems Please note that you can be…
Once the terror of skies, now a relic of a forgotten age. This sculpted dragon skull adds a dramatic and ancient presence to any tabletop, diorama, or collector's shelf. I've included a split version for FDM, which will require minimal…
I needed a mainspring winder that could be used with both loop end and hole end mainsprings. This design is a combination of design elements from both the Ollie Baker style and the Joe Collins winders. The winder is mostly 3D printed with…
Quick Remix of the rear foot / Mains Inlet for the new V0.2 to allow a bit of dual colour sexiness on the rear too.. Why would you not want your Voron logo to stand out??? Massive kudos to the Voron team on the V0.2, that can be found…
This Improved Tag Holder for @GunplaMark 's The Ultimate Cereal Container Filament Drybox remains on the drybox at all times - the filament tag only needs to be swapped out when a different brand or color of filament is loaded into the…
c'est une 3éme mains pour les soudure a l'étain avec une mâchoire sur ressort de 5.5 x 25mm pour i fixer sur un rebord de table l'épaisseur maximal est de 22mm (possible a modifier ) quand vous mettez les ficher dans le slicer il faut…
Based on reviews, it seems this fan has this issue a lot. The opening is a little large, so there is a little wobble. It seems fixable by drilling a hole in the side and threading a screw to tighten it. Been working so far for me, but…
Off Duty in the Outer Rim : Leia's teenage Grunge Band “No Krew Remains” The blaster fire faded, but the echoes of captivity lingered, a cold, metallic tang that clung to Leia long after her escape. Publicly, she was the picture of regal…
Hi ich habe ein Tutorial erstellt um den Vyper mit Klipper zu flashen - dazu gibt es eine erweiterte Config mit vielen Extras schaut gern mal rein: Playlist:…
An android/gynoid pelvis v1.0 model: female, male Hi, I am publishing the android/gynoid parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
This is a pet project I have been working on for a while. You can get more insight here: The build for the CoreCassettee is relatively straightforward, however, you will need some additional things aside from the leftovers of the…
I publish this design to give an example of the small-big problems that can be solved with a 3D printer. Checking the mainsail sheet traveler car I discovered that the cover was broken and was losing the bearings it contained. The…
Hello all. I did a quick model of the smaller lampshade from the Walmart Mainstays 72'' Lamp Shade. My wife accidently crack the smaller of the two when she was cleaning. I'm new to Fusion 360 and thought it would be good practice to make…
A project box designed to plug straight into the mains. Its made to fit a 70x50mm PCB. There are two lids; a blank one and one with a hole that fits a motion sensor (HC-SR501). I used mine with a D1 mini connect to home assistant with ESP…
A gynoid head v1.0 model: female Hi, I am publishing the android/gynoid parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
Deckbox lid with the riftbound logo and six domains in a circular pattern The print was paused at layer 21 for the dual color
An android/gynoid arm & hand v1.0 model: female, male Hi, I am publishing the android/gynoid parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
This is just a simple clip, designed in Blender, that can be used with the cheap drawer organizer baskets from Walmart so the baskets will stack. Story time: I'm in the process of reorganizing the Nordli chest of drawers next to my desk…
my parents just got a couple different types of solar landscaping lights and the asked if i could make something so they could mount them up on posts instead of putting them on stacks in the ground an this was what i come up with real…
The Mainstays plastic jar lids sold at Walmart don't come with any rubber seals or gaskets. The lids are simply hard plastic, and they leak when used with liquids. This model is designed to be printed in TPU and inserted into the lid as a…
I wanted to install a main switch on my new Sovol SV08 that could be operated from the front. Additionally, I wanted to be able to turn it on and off over the internet at any time. To achieve this, I modified and installed a Meross Smart…
This was created to save floor space in a smaller room with a fair amount of unused wall space. No modifications to the original fan or its mounting are needed. Mount the bracket to the wall. Ensure that the bracket is level. The holes…
As I was tired of the mess I had with some long power cables for yard work I decided it was time to fix the problem. Commercial parts I found either to expensive or to simple to be useful. You will need 2 of the shown part plus some 16mm…
I have here 2 files for a jammer for the cockpit of a CLC Pocketship sailing boat. Simple to print and seems plenty strong enough. The one on my boat is the old version with sharpish corners which can be annoying. This is the new and…
Both of my center brackets on 2 separate Mainstays brand clothing brackets failed and broke for a total of 4 brackets. so I created in Tinkercad a bracket to replace it printed at 100% infill GST 3D PLA+ supports yes brim yes (5 mm) raft…
I broke the tube to my solar light so I made this replacement. It is really tight on the stake part for easy removal from the ground as I had to use pliers to get mine out. I'm using PLA so we'll see how long it last. Manufacture Part…
An android head v1.1 model: male Hi, I am publishing the android/gynoid parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
It is the same as the original but with an Indented/Cutout Mainsail logo for the small 4010. I can create more sizes and variations if you like. Print with supports if needed.
An android/gynoid shoulder v1.0 model: female, male Hi, I am publishing the android/gynoid parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
Splash sliders can be printed on their top out of either pla or petg. Mine have survived the dishwasher. These are easy to print and install easily in the open position, but latch well in the closed position. I printed with .16 layers and…
This is an organiser for the board game Dark Domains by H Laboratory. I designed this insert for fast printing, less material, fast setup and teardown of the game. The insert allows you to store the game box vertical without mixing…
I really enjoy using the Sunlu 250g spools for colors that I only need a small amount of filament and don't feel like ordering a full size roll. So I wanted a better way to store my Sunlu 250g mini spools and I found that two spools fit…
Animal skulls and forest foliage, framed as wall art. Snap-fit frame: press the back to lock, push the front to release. No AMS/MMU required, only three color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm…
An android/gynoid leg v1.0 model: female, male Hi, I am publishing the android/gynoid parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
This is a replacement cap for the Mainstays 7in Pool Chlorinator if the clips are broken (Why are they so thin in the first place? beats me). (This cap also looks similar to a cap found on the 7in chlorinator made by U.S Pool Supply so it…
A sturdy box to house a standard 8way relay board attached to 8 IEC outlets from two IEC fused and switched inputs. The relays typically found on ebay of this type are 'rated' at 10amp. be aware, this does not mean they will handle 10amps…
I wanted to create a single box solution for For What Remains that enabled ease of play. This is designed to be able to pick a faction box with all the tokens easily sorted. There is so much content across the three boxes that it was nigh…
An android/gynoid foot v2.0 model: female, male Hi, I am publishing the android/gynoid parts for the DIY project here. You can find further information on my website . . https://build-android-techrobots.page Lets MAKE ;) .... ....…
Bergeon Mainspring Winder Tool Holder for two handles (L & R) and eight winders
Description An inline adapter that allows you to safely measure voltage and current with a current clamp and a multimeter. Please stick to the parameters provided under the instructions header, several elements of the model are optimized…
Découvrez le modèle 3D du Stickman Mains dans les Poches, une figurine qui incarne la décontraction et la tranquillité. Imprimez ce modèle en 3D pour ajouter une touche de détente et de nonchalance à votre collection. Le Stickman Mains…
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner…
Download the zip and upload the .theme folder into mainsail SET THEME TO DARK
Easy and fast to print dust cap for unused sockets on your european mains outlets. Send me a message if you need one with for a french socket, with a hole for the earth pin. Category: Household
2U Mains Socket Panel Instead of buying a rack-mounted socket extender, I decided to 3D print a casing for the socket extender I already had and then mount this to my server rack. The thing consists of 10 different parts including M3 Nuts…
This is a replacement chair slide with lock for a Mainstay zero gravity steel porch swing purchased from Walmart. I recommend 85% infill and either PETG due to outdoor use.
Replacement handle for “Mainstays Safe Cut Can Opener”. Friction Fit (if you do decide to add glue be careful not to add in the wrong places). Link to Original Purchase:…
The Omnicharge 20+ is a great power bank, but it's always bothered me that the 240V socket on the EU/UK version has exposed terminals, meaning it's possible to have exposed live contacts. This cover is the first ‘proper’ thing I've…
A suspended feeder for feeding slime mold to springtails, for an 11.8 cup mainstays tritan food storage container This should be printed with supports enabled. This rests on a small lip near the top of the container, but for best results,…
small booster I built to raise the table up for my son to fit his legs under. lifts table 30mm designed in Tinkercad Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
Both of my center brackets on 2 separate Mainstays brand clothing brackets failed and broke for a total of 4 brackets. so I created in Tinkercad a bracket and a sleeve for the part that broke to begin with the part fr the horizontal bar…
For this breakout board from Grin I needed a replacement casing. Prints flat, no supports, 0.4mm, 4 walls for a solidness, infill of whatever. Strap the case down with some extra small zipties with the included through-holes. Included in…
Découvrez le modèle 3D du Stickman Mains dans les Poches 2, une figurine qui incarne la décontraction et l'attitude nonchalante. Imprimez ce modèle en 3D pour ajouter une touche de détente et de coolitude à votre collection. Le Stickman…
Tired of Lifetime folding table wobbling when using a Mainstays Riser. Made an adapter to give a more secure fit and stabilize the table making it less prone to wobble. Adapter fits snugly into riser allowing a 26mm table leg to fit…
i converted the mainsail voron testcube into a knob for drawers and doors the hole in the center should fit to heat inserts like those who are common in the voron builds modifications all done in prusaslicer Danger: Prusaslicer did not…
Needed to run a device via a 24v relay and a standard 240vac power plug. Made this case to be able to house all the components. Pilot light is a 600 series neon red light: PDL610MNRDWH
Animal skulls and forest foliage for your table. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun Matte PLA Black) At layer…
Since the plastic part of a Strand Quartet PC 650W theater spot light that holds the terminal block of the mains cable tends to fall apart after “a few years” of usage, I made a replacement part. Best printed in ASA or ABS. I noticed that…
Needed to replace the broken thumb screw. Printed with PLA.
Hier stelle ich Euch mein Gehäuse zur Verfügung, dass ich für meine Netzvorrangschaltung erstellt habe. Es kann natürlich auch andersweitig genutzt werden z.B. als Wandmontage für das DSP5005. Viel Spass :-)…
Magic remote/ Phone holder with wireless charging clamps around Mainstays Glass End Table Floor Lamp. https://www.walmart.com/ip/Mainstays-Glass-End-Table-Floor-Lamp-Matte-Black-CFL-Bulb-Included/49239355 Wireless charger this was…
A small Mainsail planter to make your workbench a bit nicer. :)
Print two covers with suitable length (you can tune-up the length with slicer zoom, adjust only the length dimension). The example is 17cm (inner diameter) i.e. two covering 34cm queue of circuit breakers. The cover is a snug fit for 45mm…
I resized biocode's tank strainer (thing:4615031) to fit the 'Mainstays 16 Cups Tritan Canister with Lock, Clear Lid & Container with Grey Lock' available at most Walmarts :…
I lost a latch for my cake carrier, so I made another one. Best printed from end, with supports.
My friend lost its bag clamp for his mainstream msx bag, as we are going on a bike tour next week we needed a replacement. No free for you all folks! With msx this item seems non deliverable as spare part at this time! Category: Sport &…
Top brackets to hold walls and door on a Mainstays Pearson enclosure from Wal-Mart in the vein of the Ikea-Lack enclosures. Matches IllGotti's mainstays riser perfectly. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3…
A simple tool to turn the robot on and off easily.
I created a wall mount for a shoe rack to push it off the wall a bit to allow for larger shoes to rest on the rack, leaning towards the wall. I also made legs for the shoe rack to rest in to support the weight of the shoes, since it's…
The mainspring winder case uses a 14x8.5x3.5 cm plastic box, which I got from Temu. The winders are the set listed as package A, purchased from Temu or AliExpress, containing 10 units. I also added two more, the NH35 and AP3120, to…
Replacement drip tray for Mainstays model MS8500778514-02 single cup coffee brewer. Printed with PETG.
Printed in Petg 25 percent infill and 4 walls
