P
PrintablesSinJun
Majoras Mask
Majoras Mask HD from The Legend of Zelda printed in different parts
- Downloads
- 5,465
- Likes
- 937
- Rating
- 4.94
Search results: major
202 models
P
Printables3DPrintDogs
Multicolour Majora's Mask
This is a multicolour remix of the Majora's Mask model by WeeMadSausage on Thingiverse. We've also made a wall-mount that holds the mask up through the eyeholes. For the full colour version, you will need a printer that can print a…
- Downloads
- 4,042
- Likes
- 1,143
- Rating
- 5
P
PrintableseCrowne
4.7L Mini ITX case, easily printable (2 major pieces), sandwich layout, no extra thread inserts, standoffs or feet required
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
- Downloads
- 3,943
- Likes
- 587
- Rating
- 5
P
PrintablesNicolas Bras
Side Blown Flute in A Major
I made a copy of one of my plastic pipe instruments to try the result, it works quite well so I share the result with you! I made a video about this project : The first version is a fully 3d printed 3 parts flute, you have to glue the…
- Downloads
- 1,692
- Likes
- 128
- Rating
- 4.57
P
PrintablesPeter Farell
The Legend of Zelda: Majora's Mask
The Legend of Zelda: Majora's Mask The widest section of the inner dimensions of the hollowed out side of the mask is slightly larger than the average mans face. If you have a large head you may need to enlarge it which would require you…
- Downloads
- 1,407
- Likes
- 331
- Rating
- 0
P
PrintablesTriple G Workshop
Major Headache Skull
2 Versions included- One has a hole in the bottom to allow for tree supports on build plate only. Scale to any size. Max Mini Size shown above. Normal size below: Powered by Image-to-3D from MakerWorld…
- Downloads
- 1,363
- Likes
- 476
- Rating
- 5
P
PrintablesKNfLrPn
Majora's Mask Woodgrain Flat Back / Embedded Magnets
There is a version without embedded magnet spots and one with. (!) If you want to embed magnets, make sure you look up how to add a pause during the slicing process. This varies by slicer. (!) The current design is for cylindrical…
- Downloads
- 1,188
- Likes
- 447
- Rating
- 5
P
PrintablesBagels
Majoras Mask Hair Pin
Added a cutout to the mask so the master sword (or other item) can be inserted. I tweaked this to function as a hair pin Category: Fashion
- Downloads
- 835
- Likes
- 212
- Rating
- 4.33
P
PrintablesLink
Zelda: Fierce Deity Sword Full Size: Majora’s Mask, The legend Of Zelda
Important Update Note: I made this model early on with very little experience. Two people have now reported having issues with this model, and it's very possible that this model has problems. I don’t want you to waste your filament……
- Downloads
- 787
- Likes
- 187
- Rating
- 4.5
P
Printablessevenalive
Multicolor Majora's Mask - 8 colors for Snapmaker U1.
This is a Snapmaker U1 profile for a remix of Majora’s Mask, designed specifically for 4 color toolchanger printers like the Snapmaker U1. The original remix placed multiple models on the same plates, which resulted in excessive filament…
- Downloads
- 782
- Likes
- 120
- Rating
- 5
P
Printablesanimatorgeek
Papageno's Bird Call from The Magic Flute (5-note flute in G Major or F Major)
Update June 18 2023: I moved the lanyard lugs to the sides, which should make the bird call dangle better when worn as a necklace. This is a set of whistles tuned to the first five notes of a G or F Major scale. It is designed for use as…
- Downloads
- 748
- Likes
- 125
- Rating
- 5
P
Printablesabsurdly_nerdly
Elegoo Centauri Carbon Fan Recirculation Mod - *Major* Noise Reduction (no muffler)
First I have to give credit to Synthetic Electron 3D for the original concept and design. He really did most of the work! This mod re-uses the stock 'auxiliary' cooling fan, blowing through the flat horizontal blower in the rear of the…
- Downloads
- 740
- Likes
- 212
- Rating
- 4.88
P
PrintablesJo0001
Majoras Mask Wood Grain Large Size
Resolution: 0.2 Infill: 10% Cubic Filament brand: Sunlu Filament color: Burly Wood Filament material: PLA+ Printed with tree supports everywhere and after printing the left hand side I used support blockers to reduce the number of trees!…
- Downloads
- 675
- Likes
- 158
- Rating
- 5
P
PrintablesToxicMaxi
Major League Baseball / MLB Logo
Major League Baseball / MLB logo in 3D. 5mm high.
- Downloads
- 571
- Likes
- 47
- Rating
- 5
P
PrintablesPenguinPrototypes
4-Color AMS Majora’s Mask: High Detail, Easy Build
Ever since I got my Snapmaker U1 delivered, I have wanted to print the four-colour Majora's Mask model. However, I wasn't quite happy with the painting or the high wall thickness (a remnant of the model being intended as a keychain). One…
- Downloads
- 556
- Likes
- 224
- Rating
- 5
P
PrintablesJulius3E8
USC Tommy Trojan Drum Major Lego Helmet
A helmet that was never included in the Tommy Trojan/Drum Major Lego kit. You'll also wanna print a sword, cuz it didn't have one of those included either! https://www.printables.com/model/248800-tommy-trojan-lego-sword Two files: 1.)…
- Downloads
- 531
- Likes
- 67
- Rating
- 5
P
PrintablesPrintedByMark
Skull Kid - Majora's Mask
Skull Kid wearing the Majora's mask, or vice versa depending on your perspective. This mini is approximately 38mm scale.
- Downloads
- 452
- Likes
- 154
- Rating
- 5
P
PrintablesLink
Skull Kid: The Legend of Zelda: Majora’s Mask ZELDA ZELDA ZELDA THE LEGEND OF ZELDA
High poly model of Skull Kid from The Legend of Zelda: Majora’s Mask. Needs supports. If you like this, give it a like and follow me, because I make Zelda models all the time.
- Downloads
- 452
- Likes
- 85
- Rating
- 0
P
PrintablesFilip Honzárek
TC Electronic G-Major Triple-C Encoder Knobs
Inner and outer knobs for TC Electronic G-Major 1 and Triple-C devices. Possibly to fit other devices from TC. Inner knob has clearance versions. Every 3D printer has different possibility about precision, so I created clearance files…
- Downloads
- 433
- Likes
- 16
- Rating
- 5
P
PrintablesReProps
Majora's Mask from Legend of Zelda
This is my attempt at Majora's mask from The Legend of Zelda: Majora's Mask game. You'll need to mirror all 5 of the spikes, they go 1-5 from bottom to top. To get a wood grain texture use a rotary tool to gouge out small lines or use a…
- Downloads
- 420
- Likes
- 190
- Rating
- 4.33
P
PrintablesOssoBlack
Majora's PPE Mask Original
PPE Majora's mask based of the Legend of Zelda Majora's Mask. Half face / mempo style mask
- Downloads
- 344
- Likes
- 112
- Rating
- 5
P
Printablesdjos_1475
The Turbinator v3.0 - my entry into Major Hardware's Fan Show Down S5
My entry into Major Hardware's Fan Show Down S5. I’ve redesigned basically everything except the “base-plate”. I thought it’d be fun to make a new version for MH's new testing rig. This version is using a NASA inspired Low Speed…
- Downloads
- 309
- Likes
- 43
- Rating
- 0
P
Printablesnateysmith
INDX 8T - Majora's Mask Multicolor
I was able to remix this version for compatibility with the INDX 8 tool variant and it is already painted! For those that are curious, this was PLA. These are the colors that I used (links are not affiliates in any way): Polymaker Pro…
- Downloads
- 285
- Likes
- 128
- Rating
- 4.92
P
PrintablesRithm3D
Sergeant Major - USA/USMC
I created (2) different types of the Sergeant Major rank in order to choose from a plain and flat star to a 3D version star at the center. When printing the 3D star, labelled "SgtMaj V2", the below perimeters worked best for me on all of…
- Downloads
- 257
- Likes
- 22
- Rating
- 0
P
PrintablesDoug Joseph (design8studio)
Improved / repaired spikes for ReProps's "Majora's Mask from Legend of Zelda"
I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…
- Downloads
- 225
- Likes
- 82
- Rating
- 0
P
PrintablesMcjad
Fanart - Major - Atomic Heart - TableTop 32mm
Hier gibt es eine ausführliche Beschreibung: https://druckwasdaszeughaelt.de/atomic-heart/#agent-p3 https://ko-fi.com/dwdzhde Der Major aus dem Spiel Atomic Heart. Skaliert auf TableTop-Standard 32mm. 3D-Druckeinstellungen Resindrucker:…
- Downloads
- 223
- Likes
- 24
- Rating
- 0
P
Printableshigglyblarg
Threaded Nozzle Tip for PCF-26P Water Bottle (26.67 mm major diameter, 24.55 mm minor diameter)
Made a nozzle cap for a 16.9 oz Aquafina water bottle. The cap adheres to the PCF-26P thread standard (can be found here: https://www.bevtech.org/assets/Threadspecs/2072575\_tmp.pdf ). Prints well, as the bottom part of the threads…
- Downloads
- 222
- Likes
- 20
- Rating
- 4
P
PrintablesSchlossbauer
Majoras Moon
Majoras Moon. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
- Downloads
- 221
- Likes
- 51
- Rating
- 0
P
PrintablesCheeseburgerock
Marshall major 3 repair part (.STEP included)
I have downloaded and printed all other versions of these parts on tningiverse but they all suck and don't fit. If you need to modify a part to suit your needs, you can download the .step Print Settings Printer Brand: Creality Printer:…
- Downloads
- 220
- Likes
- 14
- Rating
- 0
P
PrintablesModel Magic
FIXED - Predator - Major Alan Dutch Schaefer - 1987
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 213
- Likes
- 35
- Rating
- 0
P
PrintablesAbelo Tales
Majora Mask keychain
It has a problem that i do not know how tos solve, it is kind of empty by the inside, but I hope is useful and u like it
- Downloads
- 213
- Likes
- 16
- Rating
- 0
P
PrintablesKai
Remix of Airbus Style Throttle Quadrant - Major Update
As i needed a new throttle quadrant i took this brilliant design and scaled it down to 87% as i needed it a little smaller. Additionally i changed the design a little according to following of my rules: - Simplification - Print more and…
- Downloads
- 210
- Likes
- 9
- Rating
- 0
P
Printablesmaacplay
Máscara Keaton Zelda Majora's Mask / Ocarina Of Time
Máscara Keaton de la saga de The Legend Of Zelda, concretamente de Majora's Mask y Ocarina Of Time. Pronto habrá más modelos de máscaras de este juego y mi idea es hacer todas las máscaras de la saga completa. Hago encargos…
- Downloads
- 205
- Likes
- 49
- Rating
- 0
P
Printableslightmaster
Multicolor Majora's Mask (P1S)
This is a remix of 3DPrintDogs' Multicolour Majora's Mask. Their version was set to use the Bambu X1 Carbon printer, and if you tried to change it to the P1S printer, it would lose all the coloring. The models themselves and the coloring…
- Downloads
- 189
- Likes
- 46
- Rating
- 5
P
PrintablesMK007
Mask of Truth Adult (Majora's Mask)
Should be fairly easy to print, highly recommend supports for all pieces.
- Downloads
- 188
- Likes
- 58
- Rating
- 5
P
PrintablesN-Spire
Major Upgrade! Easy! K2 SE CFS Top Mount Bracket (Space-Saving, No-Drill Mount)
Description Maximize your footprint and clean up your setup with this top-mount bracket for the Creality K2 SE + CFS system . This bracket lets your CFS sit securely on top of the printer , freeing up valuable bench space while keeping…
- Downloads
- 173
- Likes
- 13
- Rating
- 0
P
Printablesthebrew.shop
The Legend of Zelda: Majora's Mask
This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, just ensure your bed is clean and sticky, and your stringing…
- Downloads
- 166
- Likes
- 100
- Rating
- 5
P
PrintablesBearded Man Creations
Kenwood Major tool hanger
Kenwood Major tool hanger for mounting under table/shelf or on wall. Great way to store your Kenwood Major tools nearby if you use your kitchen machine regularly 3 mm hole for mounting. Printed in PETG with 30% Infill and 4 walls and…
- Downloads
- 161
- Likes
- 19
- Rating
- 5
P
Printablesmichael mayer
Marshall Major IV Hinge Fix
Simple slice and Print. Support needed. Use Tree support. For me the conter part and screws are not needed because it holds already with the press fit.
- Downloads
- 159
- Likes
- 3
- Rating
- 0
P
PrintablesModel Magic
Lost in Space - Major Don West - 1965
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Downloads
- 151
- Likes
- 21
- Rating
- 5
P
PrintablesdesignStryc
Mazzer Major single dose chute - replacement for doser
Make your brutal grinder, the ominous Mazzer Major, single-dose! With this replacement, the beast becomes relevant again in the world of the third-wave coffee. And you can enjoy the pleasure and speed of those 83 mm burrs in top-notch…
- Downloads
- 141
- Likes
- 5
- Rating
- 0
P
PrintablesMikkel Hedegaard
CSGO Major trophy BLAST Paris 2023
CSGO Major trophy BLAST Paris 2023 I downloaded this model from Sketchfab and converted it into a STL file. It has to be printed with support, and carefully be removed right at after printing. Then it is easyer. I printed this in gold and…
- Downloads
- 132
- Likes
- 9
- Rating
- 0
P
PrintablesBagels
Majoras Mask Pendant (Smoothed)
The kiddo wanted a Majoras Mask necklace, so I added a loop for the pendant, and I smoothed the spikes so they wouldn't be as pokey Post-Printing Category: Accessories
- Downloads
- 131
- Likes
- 16
- Rating
- 5
P
PrintablesMade14
Zelda Majora's Mask Moon Coaster
Drinks coaster with Zelda Majora's Mask Moon design. Print at 0.3mm layer heights. Gcode is for 0.6mm nozzle.
- Downloads
- 130
- Likes
- 52
- Rating
- 5
P
PrintablesMaxwell
Drum Major Mace
This is a Drum Major Mace for a marching band, there are STL files for both top and bottom of the mace This is an economical Drum Mace printable for under $5. You need a 3/4 in PVC pipe, some super glue, and maybe 15ft of para-cord and…
- Downloads
- 123
- Likes
- 11
- Rating
- 0
P
PrintablesJ.J. Kucharczyk
Marshall Major III headphone side wire mounting.
Marshall Major III headphone side wire mounting. They are still working as they should today. I printed in normal PLA wi
- Downloads
- 123
- Likes
- 8
- Rating
- 5
P
Printablesdjos_1475
The Turbinator - As seen on Major Hardware's Fan Show Down S4 EP11
My entry into Major Hardware's Fan Show Down S4 EP11
- Downloads
- 122
- Likes
- 31
- Rating
- 0
P
PrintablesAndrey Korsak
T.C.Electronic G-Major 1 Knobs
Knobs for TC Electronic G-Major 1. Original size.
- Downloads
- 118
- Likes
- 1
- Rating
- 0
P
PrintablesModel Magic
Major Payne - 1995
Major Payne - 1995 3D printable model.
- Downloads
- 116
- Likes
- 31
- Rating
- 0
P
PrintablesdesignStryc
Mazzer Major Single dose hoper and bellow
Easily printable insert for coffee grinder Mazzer Major to replace the original hopper. Make you single dosing procedure with Mazzer Major flow like a stream. No anti - popcorning cover needed! Integrated bellow, slow feeding of the beans…
- Downloads
- 116
- Likes
- 8
- Rating
- 0
P
PrintablesPrusa.printer
Marshall Major 4 Folding latch
A little latch to close your marshall major properly when folded. (make it compact)
- Downloads
- 115
- Likes
- 10
- Rating
- 5
P
PrintablesModel Magic
Band of Brothers - Major Richard Dick Winters - 2001
Band of Brothers - Major Richard Dick Winters - 2001
- Downloads
- 113
- Likes
- 13
- Rating
- 0
P
PrintablesModel Magic
M.A.S.H. - Major Margaret Hot Lips Houlihan - 1972-1983
M.A.S.H. - Major Margaret Hot Lips Houlihan - 1972-1983
- Downloads
- 112
- Likes
- 15
- Rating
- 0
P
PrintablesModel Magic
M.A.S.H. - Major Frank Burns - 1972-1983
M.A.S.H. - Major Frank Burns - 1972-1983
- Downloads
- 110
- Likes
- 17
- Rating
- 0
P
PrintablesLuvter
Garo's mask from Majoras mask 3D
Garo's mask from Majora's mask 3D obtained from files extracted by https://www.models-resource.com/3ds/thelegendofzeldamajorasmask3d/model/12408/ I only cut out the mask from the model and made it wearable. The scaling is just enough to…
- Downloads
- 110
- Likes
- 53
- Rating
- 0
P
PrintablesTheMasonX
Small Key from Legend of Zelda Ocarina of Time and Majora's Mask
Small Key from both The Legend of Zelda: Ocarina of Time and Majora's Mask. I couldn't find an STL of the key from these games, so I designed one in Fusion 360. I included the key by itself, and both a small earring sized loop and a…
- Downloads
- 106
- Likes
- 30
- Rating
- 3
P
Printablesoakshadowart
Major Vonreg's Tie interceptor
Ready to print file for p1p with AMS in theme of Major Vonreg's Tie interceptor. Plenty of settings to be improved upon, just a quick paint and scale up in Bambu I thought would look cool. It did in my opinion so I thought I would share.…
- Downloads
- 103
- Likes
- 28
- Rating
- 5
P
Printablesmothmansculthead
legend of zelda windwaker / majora's mask boss key
just a boss key
- Downloads
- 103
- Likes
- 28
- Rating
- 0
P
PrintablesOnce in a Six Side
Marshall Major IV Headphoens Replacement Bracket
Replacement bracket thingo for Marshall Major IV headphones. It does away with their fragile clip system and just relies on a friction fit, works well. Category: Replacement Parts
- Downloads
- 101
- Likes
- 6
- Rating
- 0
P
PrintablesModel Magic
M.A.S.H. - Major Charles Emerson Winchester III - 1972-1983
M.A.S.H. - Major Charles Emerson Winchester III - 1972-1983
- Downloads
- 97
- Likes
- 16
- Rating
- 0
P
PrintablesCmarlow
Marshall Major 3 Folding latch
A little latch to close your marshall major properly when folded. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.15 Infill: 100 Filament: Polymaker Polyflex PLA Black Notes: . Category: Audio
- Downloads
- 97
- Likes
- 18
- Rating
- 5
P
PrintablesModel Magic
Star Trek Deep Space Nine - Major Kira Nerys - 1993-1999 - 2 VERSIONS
Star Trek Deep Space Nine - Major Kira Nerys - 1993-1999 - 2 VERSIONS
- Downloads
- 96
- Likes
- 19
- Rating
- 0
P
PrintablesWoofWoofGoose
Majoras Mask Ear Plugs 27mm
Size is 27mm right now, to make it fit your ears just choose whatever mm you need and add 3. EX:I need a 35mm plug, scale plug x and y + 3mm the size you need. Adjust Z to your liking and once X and Y gets scaled too much you will have to…
- Downloads
- 93
- Likes
- 18
- Rating
- 0
P
PrintablesRaistlinJ
Prusa 5-color version of majora's mask
Wrote converter (https://github.com/raistlinJ/3mf_bambu2prusa) to generate a prusa-friendly 3mf; repainted to 5 colors
- Downloads
- 91
- Likes
- 19
- Rating
- 0
P
PrintablesLotab
Mazzer Major Bellows and Throat
DONT VASE MODE THESE. They are designed to fit in exact wall width, in and out. This is bellows and a throat guide for Mazzer Major coffee grinders. This will help you achieve zero grind retention. If you have a Mazzer, you know what the…
- Downloads
- 91
- Likes
- 10
- Rating
- 0
P
PrintablesTercer
Deku scrub (Majoras Mask Link)
All rights go to Nintendo. Sometimes the hair doesn't print… Use supports for the mouth.
- Downloads
- 87
- Likes
- 12
- Rating
- 0
P
PrintablesChris Culpepper
Mazzer Major Angled Feet
This is a set of feet to angle the Mazzer major to better use a doserless chute. This may fit the Junior or the super jolly, but I haven't looked at all. This requires some M5x25 bolts and some M5 nuts. You could probably alter the shaft…
- Downloads
- 87
- Likes
- 8
- Rating
- 4
P
PrintablesMonkey Skull Studio
Major Arcana Tarot Bookmarks (22)
Overview A full set of 22 Tarot Bookmarks featuring all Major Arcana designs, created as Hueforge-style black & white prints. Each bookmark is slim, sturdy, and ideal for books, journals, and gifting. Designed for high detail and clean…
- Downloads
- 84
- Likes
- 19
- Rating
- 3
P
PrintablesExnihilo Prints
Heros Bow The Legend of Zelda Majora's Mask
Does require supports, i print flat down and sand the side that faces the print plate, in theory it could be printed at a tilt and upwards.
- Downloads
- 84
- Likes
- 34
- Rating
- 0
P
Printablesm.kohoutek
Major Goodway - Paw patrol
Printed from PLA, 3 perimeters, 20% honeycomb infill, using tree supports.
- Downloads
- 83
- Likes
- 11
- Rating
- 0
P
PrintablesVladimir Kafka
Majora's Mask painted for INDX
A few color adjustments, printed and tested on the Prusa CORE One+ INDX.
- Downloads
- 83
- Likes
- 26
- Rating
- 0
P
PrintablesThe lone Nomad
Replacement Nob for Marshall Major 3 & 4
might need a frew reprints to make it stick properly i used a 0.25 nozzle
- Downloads
- 83
- Likes
- 8
- Rating
- 0
P
Printablesnetzmensch
Marshall Major II Headset wall holder
A wall holder for my Marshall Major II Headset. Print Settings Printer: Print Rite DiY 3D Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Category: Audio
- Downloads
- 74
- Likes
- 4
- Rating
- 5
P
PrintablesSeljD
![XOL Faceplate with Voron Logo (for Major Release [2024-06-19])](https://media.printables.com/media/prints/929727/images/7088049_752f545f-cdfe-4cf7-a462-5042413ddedb_02afe15c-8220-4d5c-9da7-4988b7c2d177/20240701_201239.jpg)
XOL Faceplate with Voron Logo (for Major Release [2024-06-19])
Remix of faceplate for Xol Toolhead (June 2024) with Voron logo
- Downloads
- 74
- Likes
- 15
- Rating
- 5
P
PrintablesMooMooBunnylips
Mirror Shield from Majora’s Mask, color separated
The Mirror Shield from The Legend of Zelda: Majora’s Mask. A project I worked on to separate each color for the model into separate pieces so pieces can be printed out in their own color (no painting / minimal painting required to post…
- Downloads
- 73
- Likes
- 12
- Rating
- 0
P
PrintablesTylerCode
Soundbar Mount (Majority Bowfell)
A while back we bought a soundbar, specifically this soundbar for the bedroom because even a cheap, lower quality soundbar is better than what comes baked into the TV. You can get these on Amazon for like 40 bucks or something. Anywho,…
- Downloads
- 72
- Likes
- 7
- Rating
- 5
P
PrintablesRustyVince63
lithophane Poster Legend of Zelda Majora's Mask N64 Nintendo
lithophane Poster Legend of Zelda Majora's Mask N64 Nintendo Voici un lithophane d'un magnifique poster sur le thème de Legend of Zelda Majora's Mask de Nintendo N64. Faites vous plaisir ! This is a lithophane from a beautiful Legend of…
- Downloads
- 70
- Likes
- 21
- Rating
- 0
P
PrintablesTim Pappot
14 Major clans VtM V5 Lithographics
The 14 major clan logos ov VtM V5, in lithography form, created through; https://tool.itslitho.com/CreateModel They're in a weird standing formation, so put them on their backs when printing, probably. They're all 100 mm diameter, so…
- Downloads
- 68
- Likes
- 3
- Rating
- 0
P
PrintablesMorra812
Majora's Mask Light Box Legend of Zelda
Printed on an X1C. A lightbox featuring Majora's Mask from The Legend of Zelda: Majora's Mask! Print facedown on the textured plate. No supports needed. Roughly 9.5in in size. I've printed with 8 colors, but can easily be dropped down to…
- Downloads
- 66
- Likes
- 32
- Rating
- 5
P
PrintablesEmmanouel Díaz Domínguez
Skull Kid (Majora's Mask)
Got the model from The Models Resource.
- Downloads
- 63
- Likes
- 9
- Rating
- 0
P
PrintablesFilip Honzárek
TC Electronic G-Major Triple-C Rack Ears
Rack Ears for TC Electronic G-Major 1, 2 and Triple-C devices. Possibly to fit other devices from TC with 195mm depth. Print instructions PLA/PETG 0.2mm layer height Infill 40% Look to 3MF file for detailed print settings in PrusaSlicer.
- Downloads
- 63
- Likes
- 3
- Rating
- 0
P
PrintablesResin Quest Miniatures
Major Thorne Vex, Ironfront Commander | 32mm & 75mm Fantasy Miniature | FDM & Resin
🎖 Major Thorne Vex, Ironfront Commander Medium Humanoid (Human), Lawful Neutral Armor Class 20 (Ballistic Combat Armor) Hit Points 165 (22d8 + 66) Speed 30 ft. STR 18 (+4) DEX 14 (+2) CON 17 (+3) INT 16 (+3) WIS 14 (+2) CHA 12 (+1) Saving…
- Downloads
- 63
- Likes
- 12
- Rating
- 5
P
PrintablesMac10 - Daddy
Marshall Major IV Strap holder
Easy to print, use support and a 0.12 layer hight
- Downloads
- 63
- Likes
- 10
- Rating
- 0
P
Printablespvillano
Major and Minor Triads - 3D lissajous figure
Two customizable 3D Lissajous figures. Viewed from each side, the major triad model shows the ratios of the notes in a major triad: the root, the major third and the fifth. When played in tune, the frequencies of these notes will be in…
- Downloads
- 62
- Likes
- 4
- Rating
- 0
P
PrintablesChris Frazier
Majora's Mask Coaster
Legend of Zelda Majora's Mask themed coaster. One of my all time favorite games and love the design of Majora's Mask. Printed with a 0.4 nozzle at .20mm, but plan on trying this model with a 0.2 nozzle for finer detail. Coasters are…
- Downloads
- 61
- Likes
- 14
- Rating
- 0
P
PrintablesTalbot
Adapter for ear cushion from Marshall Monitor 2 to Major 3 headphone
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
- Downloads
- 58
- Likes
- 12
- Rating
- 0
P
PrintablesMelmaking
Duduk in F major
this is a duduk in F the fingering is not similar to a traditional duduk i haven't printed it yet but it should work have fun Category: Music
- Downloads
- 57
- Likes
- 17
- Rating
- 0
P
Printableschewiedies
Vulpes Majora Case w/ Modular Center
CHANGELOG: 12/14/23 - V2 Updates (Inserts version only): Fixed the issue with the 5mm gap between the middle piece and base piece(s) magnets. My bad. Also remove the chamfer directly beneath the middle piece for a more refined aesthetic.…
- Downloads
- 56
- Likes
- 5
- Rating
- 5
P
Printablesgobby gobstoppers
Zelda Majora's Mask Nintendo Switch Pro Controller Holder Variation
Inspired by the classic Majora's Mask game, this is a variation of my Nintendo switch pro controller holder! It would look perfect in any gamers room! Please leave any ideas for future versions, and my other ones you can download here!…
- Downloads
- 54
- Likes
- 18
- Rating
- 3
P
PrintablesFungusAmongUs57
Majora's mask for Dummy 13 / Lucky13
Mask has some detail lowest resolution is best. 0.4 nozzle (or smaller) 0.08 line height (or smaller) Print in the orientation of the file. Print with raft for best results.
- Downloads
- 53
- Likes
- 16
- Rating
- 0
P
PrintablesSergio Morales
Majorca Island
3D model of Majorca Island (Spain). You can change filament color based on layer altitude.
- Downloads
- 53
- Likes
- 3
- Rating
- 0
P
PrintablesRayko
NV-AA1-12 Airflow Amplifier for the base from MajorHardware
This is a remix of the Noctua Airflow Amplifier. A bracket for the base from MajorHardware was added. Link to the model from MajorHardware: https://www.thingiverse.com/thing:4911660
- Downloads
- 53
- Likes
- 5
- Rating
- 0
P
PrintablesBot I Bot
Marshall Major IV lock
A very simple model to print, no supports needed only takes 15min.
- Downloads
- 52
- Likes
- 7
- Rating
- 5
P
PrintablesChrizzlyam
Deku mask (from tloz majora's mask)
it needs supports to be printed 👍
- Downloads
- 48
- Likes
- 11
- Rating
- 0
P
PrintablesRustyVince63
lithophane artwork Zelda Majora's Mask N64
lithophane artwork Zelda Majora's Mask N64 Voici un lithophane d'un artwork Zelda Majora's Mask N64. Faites vous plaisir ! This is a lithophane from an artwork about Zelda Majora's Mask N64. Enjoy ! Print Settings Printer Brand: Creality…
- Downloads
- 47
- Likes
- 18
- Rating
- 0
P
PrintablesBrian Carpenter
Zora Transformation Masks from The Legend of Zelda Majora's Mask
These two masks are from The Legend of Zelda Majora's Mask. The first one is what allows you to transform into a Zora version of Link, taking on the identity of the Zora Mikau. The second mask is mid transformation, as Link displays a…
- Downloads
- 45
- Likes
- 16
- Rating
- 0
P
Printablesahoward
Mazzer Major Brewista Smart Scale II mount
Mazzer Major Brewista scale mount. Works with the home-doserless.com single dosing kit and the Brewista Smart Scale II
- Downloads
- 45
- Likes
- 1
- Rating
- 0
P
Printablest5montecarlo
Mower Blade Balancer (based on model by marius_ciolacu) V2 - Major Revisions/Improvements
1. Introduction: After modifying the original design and creating V1, I discovered the base was bending and twisting in my vise when a blade was attached. Also, the pivot shaft was bending with a heavy blade attached. With these…
- Downloads
- 45
- Likes
- 10
- Rating
- 5
P
PrintablesUnderfrog
Majora's Mask 2D Art
This 2.5D lithopane of Majora's Mask was designed to allow for easy filament swaps for color changes. Creates a shallow depth effect that makes the art look 3 dimensional at an angle. Perfect desk or wall art to compliment any Nintendo…
- Downloads
- 45
- Likes
- 12
- Rating
- 0