Counting matching models…
I present full model of a Cyberpunk 2077 character - ADAM SMASHER. This model is ripped from the game by the program Ninjaripper. On the pictures it has ~28 cm (480% scale of the original files). Printed on anycubic photon mono 4k
Print at least 2 monsters, 2 launchers, & 2 zip pulls to battle monster vs. monster in this spinning top game. All parts are designed to print without supports although you may use a brim if you have any adhesion issues without affecting…
Potato masher that can be printed without any supports. Be sure to use food safe filament and wash the finished print thoroughly with warm water and soap before use.
The D13 model shown in the pictures is at standard (100%) scale. There’s a hole designed to fit a piece of 1.75mm filament, and the disk is printed separately.
Hey I designed this Smashburger squisher I guess you could call it, 21 who loves burgers and loves smash burgers this is your best tool to make the best burgers
This was made for a buddy's car. I don't remember the year of the car, and don't know the name of the part. Be advised: this is a small part. Printed in 0.1mm or 0.12mm resolution (it is very small) with 100% infill. Slice and print in…
Should print as-is. I've printed this on a Bambu Lab P1S with default settings and it worked fine, for optimal results try; Layer height: 0.2-0.3mm Wall loops: 2-3 Infill density: 15-30% (15% is strong enough, but feel free to go up)
Just a model of the wellknown german handgrenade. No inside details, great for cosplay or warreenactment
enjoy doing smash plantains !, jejeje everythign is possible with 3d Printing I printed it in PLA to test it, but is better in PETG or ABS more heat resistent. NOTE: I printed it in two different sheet because the firts time, that I tried…
new sleeves trap and suck in air! squash the new out of your sleeves to have a nice flat deck that won't float away! wow or curved foil foils
Loved the remixed trophy, but wanted a larger base to make an inscription. Also included a blank base without text, if you want to create a custom inscription. Use the top of the trophy from the original trophy from southbaygsr
The avocado was a bit hard and the fork was slipping in the bowl. This does the job 10 times quicker. To clean, take the dish brush and poke the holes a few times while under hand temp water. Easy to use and easy to clean Versions are:…
print at 210% for best result and sand on pins with nail file and the transformation for drill bit is first bend the legs back, next bend knees back, third bend the elbows back (there is a lot of back) , last swap the head for drill and…
For the original model please head over to thingiverse he did a great job on it, I just expanded on it. do not print this in PLA.. My wife put it through the dishwasher and distroyed it.
print with supports and pla or petg, you may need to scale it up a bit. the supports are also pretty tough to get off as you can see in the picture
A tool to put together the Zuru Smashers "Smash the ball" We didn't know we have to keep the small plastic packaging!
This battle top has 3 heavy blades for maximum smashing power. I designed the spinner top and bottom parts to make them more streamlined and less bulbous. Everything screws together easily after fitting in the alignment pin using left…
The handle on my potato masher finally broke so instead of throwing it away like a normal person I decided to fix it using Fusion 360 and PLA. Used flash forge slicing Printed with Flashforge Adventure 4 3d infill Red PLA Printed at 260…
Simple utensil to mash jelly cat food into chunks. I printed it n PETG, although not technically "food safe", it's probably less prone to splintering into Tiddle's food mush. Remember a brim if you're printing it upright.
If you like my design, don’t forget to like 😉 Print Settings Printer Brand: Creality Printer: Ender-3 S1 **Rafts:** No Supports: Yes **Resolution:** 0.16 Infill: 90% **Filament:** creality PLA white Category: Scans & Replicas
Thought your Vector Pro was full-on ugly? This body kit is for you! Using the vector full-body adapter I made (Link below), you can transform your vector pro from an ugly duckling into an amazing bullpup heavy-smg-looking blaster! Uses…
Before all thanks belongs to EnDva3D, His/Her design was good but have a few problem for my machine; such as 5015 cooler fan touching stepper motor and top rail, also if you left a space on z rods for z banding compansation; fan mount…
A dough masher /tamper. For more easier tamp / mash your pie crusts. Fits perfectly in the smallest IKEA ÖVERMÄTT Food cover Overal length: 205mm I used Prusament ASA, 90% infill and 0.2mm layer height.
For the original model please head over to thingiverse he did a great job on it, I just expanded on it. do not print this in PLA.. My wife put it through the dishwasher and distroyed it.
The D13 model shown in the pictures is at standard (100%) scale. There’s a hole designed to fit a piece of 1.75mm filament, and the disk is printed separately.
A dough masher /tamper. For more easier tamp / mash your pie crusts. Fits perfectly in the smallest IKEA ÖVERMÄTT Food cover Overal length: 205mm I used Prusament ASA, 90% infill and 0.2mm layer height.
25cm tall bust of Adam Smasher from Cyberpunk. This design features these STLs: -Bust -Base Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Busto de Adam Smasher de Cyberpunk de 25cm de alto. Dicho diseño cuenta con…
Miles de Modelos Gratis en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/gratis Cientos de Ajedrez en : https://cults3d.com/es/colecciones-de-dise%C3%B1os/PJH3D/ajedrez Pasos Semana Santa en :…
after using my fingers to mash my cats food making it easier for her to eat, and getting smelly fingers into the bargain, I thought, I know, why not 3D print one. No more stinky fingers!
The handle of my potato masher fell apart so I designed a replacement in tinker cad. https://www.tinkercad.com/things/il32Oi1ZTLp/edit Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm…
I made this model to solve a problem during an afternoon sunday. In the 3mf you can see that this is reinforced at the base. 0,3 layer height for a fast print. You can find the editable model in my grabcad user profile:…
This is the Head Smasher Bat from the video game The Cycle: Frontier. Enjoy!
https://www.oxo.com/oxo-steel-potato-masher.html
