Counting matching models…
Replica of Gandalf's sword Glamdring featured in the LOTR movies. This is a work in progress. As of initial publication some things are still missing or represented in simplified ways. The runes on the chamfered part of the hilt are not…
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
AIRSOFT USE ONLY This series of parts enables use of standard M4 mags within the silverback MDR-X Change Log: V2 - June 23 Changed design of “Mag well” to be top loading, removing the need for screws and additional parts Added ~.5mm to…
The rotating joint/hinge on my Sony MDR-ZX770BN Bluetooth headphones broke on both sides. This piece attaches on both sides of the ear-cup hinge, encapsulates the existing, broken axle and puts a new one on top. Installation: Move the…
Compatible with tolgaaxu's Glamdring model available at https://www.cgtrader.com/products/gandalf-glamdring-sword-the-hobbit Printed on the Bambu X1 Carbon at .1mm using dark blue inland PLA+ and generic silver silk PLA. I used epoxy to…
Realistic gumdrop made in Blender. If printing on an FDM printer, print with the flat side down and lower slightly below the build plate so there won't be problems with the sugar particles on the bottom. I would love to see someone print…
V2: I have remade the hinge and it is now solder less. Some people had requested to make it different since not everyone was conformable soldering and the previous non solder I agree was bulky and ugly. You no longer need the metal pin,…
I never liked how the antenna would protrude beyond the thickness of the MDR3 so I designed this to replace the stock antenna cage. Reuse the stock screws. It is a bit fiddly to screw in the antenna once installed, might be something to…
Fully replacement for Sony MDR-ZX770BN hinge. This is left-side par, for other side please make a mirror one.
AIRSOFT USE ONLY Designed as a drop in replacement for the Silverback MDRX Hopup. This adjustment wheel removes the need to switch between the High and Low nub. providing the full range of adjustment (0-1250µm) , at the cost of…
An improved version of this MDR1000X hinge design: https://www.thingiverse.com/thing:3039516 -Added holes to use the original screws to hold the hinge in place -Reduced tolerances of the slot where the metal hinge slides in; snug fit even…
First off I want to say thank you to everyone who showed interest in this project. This community is awesome! I have been offered the opportunity to have my design possibly produced by MechboardUK as well as a few other Severance keyboard…
Top Gun - Cmdr. Mike Viper Metcalf - 1986
Magura MDRP Drinks coaster - made another but added as a remix as got the idea from original.
We are having a candy Christmas tree this year and this is one of the decorations my wife was looking for so I designed one. The file will print out a piece larger than what is pictured. I printed at 88%. We frosted with glitter as a post…
One of my first designs and main reasons to want a 3D printer. I tried to find this piece everywhere I could. Even tried contacting Sony trough an official repair store. The only offer I got was about the whole headband for 50€. Since I…
This is a pretty realistic sugar coated gumdrop. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter **Resolution:** any Infill: 20-40% **Filament:** any pla/any any Category: Food & Drink
Faceplate for a 3D printed version of the MDR terminal from Severance. The full enclosure requires an external modal that I cannot re-upload due to license - see my blog post for the full details .
Not much to say here. I'm too lazy to design a mag latch so just push hard when cranking the speedloader. There is a tiny window to the BB channel. I was going to shove a rubber piece in there to stop BB from coming out of the adapter but…
Gumdrop needow that if printed in TPU it will actually squish! If you like this model give it a heart! Based on the popular squishy toys, Needohs!
Provided as-is, a fully printable action figure. John LaMarr, Engineer of the USS Orville
A quick remix that works.
AIRSOFT USE ONLY Series of replacement adjustment wheels provide MUCH finer steps, at the cost of needing to swap components out to achieve the correct range of Hop. Stock = 0.024mm per click Fine = ~0.007mm per click Note in order to…
Introducing our open-source tabletop Newtonian telescope, meticulously designed for both community stargazing sessions and precise astrophotography, especially when paired with a star tracker mount. With a focus on portability, this model…
AIRSOFT USE ONLY Wrench for use with the Silverback MDRX gearbox, removal or installation of the cylinder head and base. "It's made of plastic and has a short handle!?" Don't worry this tool will provide PLENTY of torque, was easily able…
For those people who has this headphone I have designed the replic of the speaker's support
attach with the oem screws. thread the holes on the cage by running a ¼ 20 or 3/8 bolt in and out a bunch of times. Reccomend to print out of petg as pla is pretty week in this regard.
This is a simple wall hanger for the Glamdring model made by the Mystermakers Patreon. It should fit other swords with a similar design. Use #8 countersunk screws.
Slim box to store your Sony ZX headphone with support for rolling the cable and a hole to store the 6.35mm jack adapter. You can print all in PLA or PETG, except for the seal that must be printed with a flex material. You also need n.6…
This nosecone was a online request.... Mega Der Red Max Nosecone The nose cone is 16.5" / 420mm from the tip to the shoulder. Made to mount on 4" diameter body tubes Category: Hobby
This is my first attempt at an articulated model. I thought I'd just pick a starting shape and go with it. It prints in place, looks really good with multi-coloured filaments. No supports required. I've printed this as big as .2mm layer…
This is a strain relief boot designed to fit the audio jack on Sony MDR-V6 headphones (probably others as well). Because the cable used on these headphones is high quality, it does not have the strength itself and requires a cable strain…
Protective Cover for Amdro branded Ant Bait. Here's a link to the bait I was using. https://www.amdro.com/all-products/amdro-ant-killing-bait-stations NOTE: This might not fit over other branded baits. Last summer the kitchen got ants. I…
A small holder/case for Sony MDRXB50AP/R Extra Bass Earbuds. Keeps cable from being easily tangled when carrying around. To wrap headphones around I find if you start with the aux end at the back and start wrapping around it works best. I…
After a side bracket on my old Sony MDR-ZX600 headphones broke, I modeled this replacement part over a bunch of iterations. I'm only providing a file for the right side (since that's the one I had to replace), but just mirroring it should…
Covers I made to spruce up my boring MDR-ZX220BT headphones. Used double sided tape to glue those onto my headphones - just to keep it reversible. Printed with PLA on Ender 3v2. 0.2 resolution 100% infill 1 wall
This adapter allows to use larger (and for me much more comfortable) ear pads from DT770 and DT990 headphones (ear pad diameter 105mm) with Sony MDR-7506. To install the adapter simply remove the original ear pads, slide the adapter over…
Needs to be printed in PETG to allows stretching over the pixels. I used 0.2mm layer height with the balance profile on a Core One.
Mids lose their wonk, but bass still feels obscene. Mine uses nylon mesh on the opening, but you can use the infill grille with no bottom and top layer. Requires no supports. Let me know if there are issues, i'll try to fix it if i have…
🍬 Gumdrop Vase I created the Gumdrop Vase as a playful decorative piece inspired by the rounded shape of classic gumdrop candies. The design combines soft curves with a simple silhouette, creating a vase that looks great on a desk, shelf,…
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
This is a panel designed for Otem Relliks TeensyDrum module. Category: Hobby
Tool holder for the mdrive series.
Remix of [Rotated Extrusion Clip for Articulating Pi Camera Arm](https://www.printables.com/model/58730-rotated-extrusion-clip-for-articulating-pi-camera-/files) to include ribbon cable chain mount [Raspberry Pi Rapicam Camera Ribbon…
wider, better, stronger, nicer. Heavy print AF. Category: Hobby
This is swivel retainer replacement for Sony MDR XB950N1 headphones. Original metal part is about 0.75mm thickness but you can print different sizes and pick which one fits the best. Both PETG and PLA works well. The reason I designed it…
Support mdr-x, j'ai modéliser un support pour le mdr-x silverbac.
R3D MDRX Handguard Elevate your airsoft rifle’s performance and style! The R3D Reflex Handguard combines sleek design with tactical functionality, offering a lightweight and durable upgrade for your airsoft setup. ✅ Lightweight & Durable:…
"BeamDream" is the first fully 3D‑printed illumination system mod that unlocks pseudo‑DIC, darkfield, oblique, and gradient contrast modes in standard microscopes with no additional optics required.
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
Support mdr-x, j'ai modéliser un support pour le mdr-x silverbac.
This is swivel retainer replacement for Sony MDR XB950N1 headphones. Original metal part is about 0.75mm thickness but you can print different sizes and pick which one fits the best. Both PETG and PLA works well. The reason I designed it…
Slim box to store your Sony ZX headphone with support for rolling the cable and a hole to store the 6.35mm jack adapter. You can print all in PLA or PETG, except for the seal that must be printed with a flex material. You also need n.6…
A small holder/case for Sony MDRXB50AP/R Extra Bass Earbuds. Keeps cable from being easily tangled when carrying around. To wrap headphones around I find if you start with the aux end at the back and start wrapping around it works best. I…
One of my first designs and main reasons to want a 3D printer. I tried to find this piece everywhere I could. Even tried contacting Sony trough an official repair store. The only offer I got was about the whole headband for 50€. Since I…
This is a pretty realistic sugar coated gumdrop. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter **Resolution:** any Infill: 20-40% **Filament:** any pla/any any Category: Food & Drink
This version sacrifices a little bit of strength in an already under-built part to have a cutout so the wire can pass through when assembling rather than having to de-solder the wires to get it out. Removing the original piece requires…
Etwas kleiner im Innendurchmesser, angepasst weil ich es so brauchte 53mm Außendurchmesser anstatt 55mm angegeben weil sie so besser in die Keramiken passt
Hello, this is my first dragon model for 3D printing. Don't judge strictly, and give feedback if possible)
Dreamdroid robot for Arduino. Chassis on two 28BYJ-48 stepper motors with ULN2003 drivers. Arms and neck on sg90
TomDread – Iron Colossus is an original grimdark fantasy war machine designed for collectors, painters, and tabletop enthusiasts. This imposing mechanical titan features layered armor, industrial details, heavy weapon systems, and a…
The Sony MDR-XB950BT Headphones are really nice and comfy but they appear to somewhat frail. I purchased 2 and both broke in the exact same way. The swivels that hold the earpieces in place at both ends of the headband are prone to break…
I love the design by Dinhorj, it is practical and 100% functional. Only the caps are not long enough to hide the upper arms of the headset (if you don't want to cut the upper arms of the headset). So here are longer caps for a better look…
Replacement pen holder for mDrawBot Instructions Use the standard hex nut or the square nut. Category: Other
This is BOBOVR M2 Head Strap (without battery pack) Headphone Adapter For Sony MDR-ZX110. You can find here two version L and XL (for larger heads). Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 25% Filament: PM PETG or…
The plastic broke on my good old wireless headphone Sony MDR-RF6500. I bought it back in 2012 and I use it almost daily still :D To repair it and make it usable again, I made a brace that fits around the broken plastic. The brace consists…
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
Print on the side with 100% infill and support (easy to remove).
This is a DIN rail mount for a Meanwell MDR-20-5 power supply. I use this PSU to power my RaspberryPi off of the same outlet as my printer mainboard, as it has the exact power output requirements needed by the Raspberry Pi4.
I used the original brace for quite some time, but if printed in PLA it always loosened after some time. This remix addresses that and lasts a lot longer than the original and in my opinion even looks better. Category: Audio
Print with TPU (or other flexible filament), no supports required.
This is a remix of Carl Corey's case. I simply imported the mesh into Fusion and debossed the Sony logo into the top and bottom for some extra style points. The deboss is 0.4mm deep, so assuming a 0.2mm layer height, the letters begin to…
No soldering required. Suggested to print with walls enough for 100% infill and in petg or asa for flex/give to hold up.
Owning a Farmdroid robot (FD20), I needed spare parts. Specifically, the part that prevents the spring from shifting. Unfortunately, we bent and deformed this part while lowering the robot from the platform. This part is originally made…
Character Gumdramon Digimon Style Toy Anime Character Category: Toys & Games
This cage is for Thronmax MDRILL One Pro You must print PLA 1x gopro_cage_for_mic_cage.stl 2x gopro_cage_for_mic_arm.stl TPU 2x gopro_cage_for_mic_tpu_part.stl Category: DIY
