1,028 models
Bobble the head of your favorite leader of the heroic Autobots! I wasn't able to find the source for the head model I used for this bobblehead. I found similar ones, but not this exact one. If you find it, please let me know. All I did…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
no special print features I just printed it on 0.3 and draft. ONLEY WORKS ON ELMERS 7g GLUE STICKS, look at 2nd image for more info.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Upgrade your Nerf Hammershot's power to the right amount for you with these different-sized spring spacers. This model includes 4 different sizes of spring spacers: normal, half-size, ¾ size, and EXTRA STRENGTH!! (I don't know if this one…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Original file located at: https://www.toymakr3d.com/product/12-jet-squad I wanted to print up the mod, noticed there were missing mirrored objects, colors weren't sorted into proper folders for new (aka the white should really be a light…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Print approx. €13.19–€16.13 excl. taxPreliminary estimate for one variant
Bobble the head of your favorite Dinobot Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Bobble the head of your favorite Autobot Warrior! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Bobble the head of your favorite Decepticon Ground and Air Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Bobble the head of your favorite Autobot Scout! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Výplň 100%, bez podpěr a límce. Materiál PETG. Použítí pouze pro studenou vodu.
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
Parts Streamers Add these parts to a string of party flags. The number in the filename of the model corresponds to the number of revolutions of the spiral. When hanging from the string, the streamers is have about the following height…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Transformers statue that I made
Print approx. €18.15–€22.18 excl. taxPreliminary estimate for one variant
Replacement sensor holders for my “ Gardena Clear Water Submersible Pump 9000 aquasensor ” water pump. These parts replace the original holders, housing the “ON” and “OFF” sensors (#6 in spare parts list). Printed in ASA at 0.4mm layer…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
**Echte deutsche Möbel von Hand vermessen und digitalisiert** Ein schlichter Badschrank der überall in ein modernes Diorama passt **Version** Massiv *Erläuterung* Objekt ist innen massiv. Im Slicer erzeugt es im Inneren eine Füllung. Ein…
I use this mount for my self build irrigation system. The pump feeds a GARDENA Micro-Drip-System. I designed multiple models supporting a float switch and a connector for an additional water tank. To prevent the mount from floating, i…
Tactile image of a polymer. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in Braille). To break this barrier,…
EN: The holder is used for attaching various accessories to the Bosch GBH professional drilling hammer (e.g. vacuum cleaner nozzle, drilling depth indicator, etc.). The holder consists from two parts and both are connected with screws,…
To help organize my cord drawer I designed these cord wraps(Cable Tamers) in two sizes. Wanted to share here if you could use the design. How to use: Place one end of the cable into one of the smaller cut outs on the side. Wrap the cord…
G1 Transformers Optimus Prime base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…
Thsi is a simple little Transformers Optimus Prime figure that prints best with a resin 3d-printer. Enjoy! Juri
Autobot and Decepticon logos for whatever you want. I put them on my vehicle as a decal.
Recently I had entered a Hippie Van Transformer into the “Toy Cars” contest and had so much fun that I have to make more Transformers. I won't be making any cars, vans, planes or any other type of vehicle though. That's been done and I…
This is the Bumblebee from the Transformer IV movie. For printing in FDM you will need to scale up the model. Printing with SLA works great - with a lot of support structures. Original designed by Tommy Kong ( thing:416742 ) and remixed…
Self explanatory, really. Pick the sigil you like best and print it in your favorite color material. These are designed to be a slip fit with a standard 12oz aluminium can, so keep material shrinkage factors in mind. If you're not sure,…
G1 Transformers Bumblebee Transformers stl fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for best results. This model is for…
These are small printable masks of Monomon, Lurien, and Herrah from the game Hollow Knight. They were designed to clip onto straps like those on backpacks. Each mask is a two-piece print. I printed the masks in white and the clips in…
This is my version of the Autobot Matrix of Leadership, from the 1986 animated movie. I've found several good versions to print online, but they all print in a single color. This model is split into individual components so that each…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
V2: Remix of Toymakr3D's G1 Megatron to look a bit more like TF: Devastation Megatron (Permission granted). A majority of the files have been updated. Original file: https://www.toymakr3d.com/product/10-gunmaster-not-g1-megatron Support…
It is a sad fact of life that the enemies the Roman legions must face often taint and defile the ground the wage war on. Millennium of experience has taught the legio that flame will burn away even the worst of the rot! If you would like…
With permission from ToyMakr3D and Printformers to remix and share for non-commercial purposes, I present my Transformers Cosplay Helmets and masks! These were created using The Helmetizer model I made to use as a negative volume in Prusa…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
V2: Remix of Toymakr3D's G1 Starscream to look a bit more like TF: Devastation. (Permission granted). A majority of the files have been updated. Original file: https://www.toymakr3d.com/product/12-jet-squad Support the original artist:…
VIDEO PREVIEW: Here Scale: 1:30 (14cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap tolerance: 0mm balljoint, 0.05mm swivel, 0.15 peg joint Best print orientation for maximum strength…
Scale: 1:30 (14cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap tolerance: 0mm balljoint, 0.05mm swivel, 0.15 peg joint Best print orientation for maximum strength result Easy to print…
UPDATED TO V2 APRIL 2025 This is a remix / conversion kit of Toymakr3D's G1 Optimus to look more like TF: Devastation Optimus. Permission was granted by the creator. The 2025 V2 update has been significantly rehauled and improved over the…
Transformers( autobot) Collapsing Katana (Print in Place)
Thsi is a simple little Transformers Soundwave figure that prints best with a resin 3d-printer. Enjoy! Juri
Mersedes Benz E55 W211
V2: Original listing is kept here for posterity. Remix of Toymakr3D's G1 Optimus to look a bit more like TF: Devastation Optimus (Permission granted). A majority of the files have been updated. Original file:…
cool submarine made by dylanheyes
G1 Transformers Cliffjumper fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for best results. This model is for fan art purposes…
This organizer will hold twelve Oster Andis or Wahl clipper blades or guards. When using PLA I got significant warping on the corners even with a skirt, so I printed using ColorFabb CF PETG, which meant I had to print it very slowly (12…
this is a copy of a transformers toy blaster. designed off of the actual part. Best printed with an SLA/DLP printer or other high resolution 3d printer. Check out my profile for many other weapon props from different sci-fi universes!…
Scale: 1:30 (14cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap tolerance: 0mm balljoint, 0.05mm swivel, 0.15 peg joint Best print orientation for maximum strength result Easy to print…
G1 Transformers Ratchet stl base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for best…
Video Preview: Here Skale: 1:30 (11cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap tolerance: 0mm balljoint, 0.05mm swivel, 0.05 peg joint Best print orientation for maximum strength…
There were some problems with this Optimus Prime model, I made it solid and thickened all features to at least 1 mm with MeshMixer. So it all should be fixed now! It will still be a challenge to print this but the mesh is now solid and…
Thsi is a simple little Transformers Megatron figure that prints best with a resin 3d-printer. Enjoy! Juri
Articulated Non Transformable MEGATRON Figure - Minimal Supports and No AMS "Peace through tyranny" Every hero needs a great nemesis and there's too many Optimi out there. So this aims to solve the quintessential issue of balance. You're…
5 x 5 cm y un solo color , con altura 5mm Tiene dos alturas con las que se puede hacer un cambio de color (fondo y frontal). 27.08.2023 Hay un nuevo diseño con una anilla para utilizar de colgante o llavero With two highs, you can make a…
Based off my keychain model: https://www.printables.com/model/116528-transformers-keychains I realized I never made just a badge of these insignias, so here you go! Now, along with the Beast Wars badges I made:…
Mersedes Benz G63 AMG
Free stl Files for 3D Printing Transformers stl, fully articulated model but not transformable. Video Preview: Here Skale: 1:30 (14cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap…
Eat your popcorn for your Rise of the Beasts viewing from your Optimus Primal Popcorn Bucket! Instructions are in the images. The main helmet is assembled with 5 pieces. There are optional pieces (7 and 8) for those who want to paint the…
G1 Transformers Ironhide base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for best…
Modeled this up for a friend, should fit a head if i scaled it right. Category: Props
Video Preview: Here Skale: 1:30 (11cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap tolerance: 0mm balljoint, 0.05mm swivel, 0.05 peg joint Best print orientation for maximum strength…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Minecraft Keychains for Minecraft Gamers! IF YOU WANT TO WRITE YOUR NAME: Minecraft Customizable Keychain: Link HowToPrint: - Recommended Layer Height: 0,2mm - Support: No - Number of the Walls: 3 - Infill: 100 % for more stability -…
A printable small and rifle or pistol primer. These are good for safe firearm function testing, they allow the gun to be dry fired against the plastic primer. After snipping these apart, I used a Lee hand primer to load these into my 9MM…
Description: These are adapters for Submersible pumps. 2 have odd sizes which fit my cheap Amazon pumps Printables wouldn't allow me to have the “.” in .526 (meaning ½") in the file name. So if your curious what 526 means. thats why. I…
Video Preview: https://youtu.be/Ybzf_tURUIY Scale: 1:30 (14cm) Coloring can be done by using different color of filament (detail on files name) No Support Gap tolerance: 0mm balljoint, 0.05mm swivel, 0.15 peg joint Best print orientation…
Make friends and intimidate them with stupid-silly firepower why not? I've seen a few designs here and there for inline clips and I finally put a couple hours into my spiraled cylinder to get half darts stacked and firing. In brief: the…
This is a full remix of Toymakr3D's G1 Jet Squad that transforms it to his appearance in TF: Devastation. Permission was granted by the creator. Features : Significantly redesigned for style and playability Fully color separated. 1:1…
Dummy 13 Fortnite smgs Print with supports. photos are coming when I print Enjoy:)
Bobble the head of your favorite treacherous Air Commander of the evil Decepticons! Get the rest of the needed parts (spring and base) from the linked original Bobblehead models, or use my 3MF file, or print the provided gcode appropriate…
Have fun 0,2 2perimitter 10% infill use adaptiv for better Modells
Transformers coasters! Also work as display stands for your figures. Just change filament color above 2mm.
Version 2 of the OceanGate Titan submersible. With new details and better proportions, and most of all, the wiring has finally been added. More realistic parts and print optimization have also been implemented. Do not reupload this or…
This is a Remix of : https://www.thingiverse.com/thing:5345813 The original Model's Rotation Piece was to long and pushed on the front end of my Nerf Hammershot. I removed the pins that held the darts in to increase the power. Post…
This ist a remix of GP Studio's “Cable Tamers” – updated with some improvements. The ends were shortened as they often stood in way when winding up a cable. Also some material was removed for faster printing and less filament usage.…
Here are some Transformers coins I made & printed from a design I saw online. Happy printing and til all are one!
This is one of the blasters from the Transformers Power of the Primes series. Best printed on an SLA/DLP printer for highest resolution. Check out all of my transformers guns! Transformers CW sunstreaker gunsword -…
I have added the brakeman's compartment to my my previous version of the FS tipo "F" ( https://www.printables.com/model/181876-fs-carro-merci-tipo-f-ghkkms-spoor-1-spur-1-gauge- ) This one is constructed identically.
English: Original headphone bow is easy to break while normal use. Yandex aka COMMO reject warranty in this case. So you can print it yourself. Russian: Дужка для наушников COMMO Immersive. Оригинальная дужка легко сломалась при обычном…
Articulated Bumblebee Figure Non Transformable - Minimal Supports and No AMS ORIGINAL FILE AND CREATOR (Toymakr3d) https://www.toymakr3d.com/product/75-g1-transformers-bumblebee-version-2 https://www.instagram.com/toymakr3d/ This is a…
Bobble the head of your favorite Decepticon Military Operations Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with…
Transformers (Autobots) logo
Mersedes Benz SL63 AMG
Love the game and have always wanted my own “Cool S” I ripped the model directly from the game, and removed .1mm from one side to make it flat and printable at the current orientation. Add supports on the single overhang and everything…
I don't know if I should even share these, as they are far too awesome for the general public to handle. BUT! I think Optimus would want it this way. So, here they are: AUTOBOT BADGES FOR YOUR VANAGON! These fit an '88 VW Vanagon 2WD (I…
Micro-cassette and accessory holders inspired by the Soundwave and Blaster Transformers toyline. I needed some way to organize my collection of original Transformers micro-cassette robots. I made these micro-cassette holders inspired by…
The sword that comes with Transformers Legacy Motormaster is painfully small for Menasor, so here's a version with a bigger blade. One version is the entire sword, the second version splits the hilt & blade so you can print in different…
I wanted to re-create the Transformers G1 Logos for a few small projects and just general practice. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .25mm Infill: 20% Notes: I used the Filament…
All parts have been specially redesigned with printability in mind. As such, not all components are 1-1 with their original counterparts. Some tolerances might be off depending on your print settings, but this should be solved with a bit…
A 120mm fan grill for your ROG PC build. Two pieces so that you can have two colors using a single extruder printer that you can easily glue together with superglue. Mounting holes are for PC case self taping fan screws or metric socket…
Modified the Decepticon 2 and Autobot 2 Trailer Hitch Covers by Djkirkendall to use spring tabs. For 2in hitch receiver. S3D Users: There's something causing a gap between the back of the faceplate and the hitch cover that leaves a large…
As the Studio Series Megatron figure did not come with the tripple blaster I made one. 5mm handle. Should fit most transformers.
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Transformers (Decepticons) logo
There were some problems with this Bumblebee model, I made it solid and thickened all features to at least 1 mm with MeshMixer. So it all should be fixed now! It will still be a challenge to print this but the mesh is now solid and…
I liked the look of the StarSaber and didn't want to buy one, So here we go.
I found a ''Generation 1'' Optimus Prime model and made it 3D printable. It had multiple shells and some errors. The feet are still not level so don't know if it will stand, I oriented it and scaled it. If you print it please upload some…
Bobble the head of your favorite Decepticon Communications officer! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of…
![[OUTDATED] Transformers Devastation Megatron Conversion Kit](https://media.printables.com/media/prints/334966/images/2870511_8a181cee-b6c4-4097-b803-e5ad1a9b22af/large_display_2f5fea00-e34b-4f0e-9d44-10b9cc1c2fc0_334966.jpg)
![[OUTDATED] Transformers Devastation Starscream Conversion Kit](https://media.printables.com/media/prints/335719/images/2875673_974e590b-0269-4b31-bb27-a86c3387e11a/large_display_8d152752-f48d-4c00-a2e5-6941c2d8dc28_335719.jpg)
