Counting matching models…
Repaired mesh iteratively in meshlab so prusa slicer could print it. Will update with photo of print once it is done. Category: Scans & Replicas Note : should print fine in Prusa Slicer after error correction. May not print in certain…
Remeshed the model and properly corrected and shaped the neck to look properly part of the rest of the squid update: Added lower poly/smaller file sized versions for people with not so good computers/internet. They are all the same…
This skull shaped pencil-holder will decorate your desk and showcase your printers performance at the same time. Printing Recommendations: 0.2 mm layer hight or less, no supports needed, 100 % infill, 2 perimeters. Remark: Loading in…
Print this helmet with 0% infill and 0 initial bottom layers(and maybe an extra shell or 2) to turn it into a wearable helmet. Requires a massive build volume to fit over my head. Remixed from https://www.thingiverse.com/thing:425292 to…
This is a modified version of my skull project, which I ran through Blender and its mesh filters. Tiny size, intended for SLA/MSLA printer. The .stl contains the supports with which it prints easily.
I spent some time cleaning this up as best I could. Thickened the walls for printing and fixed as many mesh errors as I could. has come up well. Just needs slicing now ready for printing but should be a great model to do. Will need to be…
Another cool helmet from the Mass Effect game. Have tidied it up, remeshed, thickened the shell and split it as best I could for printing. Please if you take the time to print the file, please upload the results so we can all enjoy,…
After downloading the model and prepping it for printing by cleaning up some of the surface variations from the original scan, I noticed what seemed to be the faint outlines of little eye dots, perhaps painted or even glazed on. So I…
I thickened the walls for printing and fixed as many mesh errors as I could. It has come up well. Just needs slicing now ready for printing but should be another great model to do from the Titanfall game series. Will need to be resized to…
This Voron V0.2 Skirt Remix has a solid bottom layer that is intended to be printed with a higher infill and no top and bottom layers. For printing make sure you add a height range modifier on the lower layers. Up to this height there…
I spent some time cleaning this up as best I could. Thickened the walls for printing and fixed as many mesh errors as and hollowed it out as best I could. has come up well. Just needs slicing now ready for printing but should be a great…
Eva Unit 02 from Neon Genesis Evangelion. Printed on Elegoo Neptune 4 Pro, in PLA with 0.1mm height.
This 3D model is a lightweight, meshed basket specifically designed for storing vegetables. It securely attaches to wooden boxes or crates using built-in clip mounts , transforming them into modular and stackable storage units without the…
Variant 1 The honeycomb is printed separately from the desired complementary color. Subsequently, the main part of the part is printed, where it is necessary to set the interruption of printing in the slicer after creating a pocket -…
I had put the original two pieces together in cad but ended up with a ridge line . I then asked the maker to upload the file in one piece . but i decided to remesh the two pieces to clean it up a bit and join them. before he posted the…
The internal mesh of Joe's published meshes are a source of trouble for 3D printing. I rebuilt it so the internal corners are well-behaved. Joe's original design: https://www.thingiverse.com/thing:6384566 Joe's modified design for…
Mount a 3-pin IEC320 C14 Inlet and fused switch module under a DAISO Joint rack wire-meshed shelf! ダイソーのジョイントラックの転び止め棚の下に3ビンIEC320規格C14インレットユニットを固定するための箱 Requirements: * 1 powermounter.stl * 2 daiso.stl * 1 power connector with fused…
Since ive had some Problems in Slicing the original (Main Problem was, that the Fins are somehow separated from the Fang) i remeshed it in Meshmixer for better Slicing. No changes Made Print Settings Printer Brand: Creality Printer: CR-10…
I had some problems with the original file: There are holes where there shouldn't be any. So I remeshed, cleaned and fixed it. Thanks to ecafruoy for designing the original thing: http://www.thingiverse.com/thing:71912 Category: Keychains
I printed with 3 perimeters and 10% cubic infill, PLA. The basket lids print with the brim. For one box, you need: 2x basket holder 2x basket holder mirrored 4x basket lid 4x basket 2x Frame Outer 1x Frame Mid You can use included…
I had remeshed these bondtech fan shroud since Sept, and tested it out since then. the performance is good. These are 2 versions of those: Prusa & Mosquito version. Anyone of you feel like to try these out?
so simple it looks so hard it is to make from a image to be a clear remeshed quads mesh Have Fun
Made a remix of @chal's parts for meshing the double keystone skirt Attached step + 3mf with an example mesh
Single chamber meshed 600mL Becker size holding chamber for patch clamp experiment. Allow top and bottom perfusion of the sections for curing in bubbling artificial cerebrospinal fluid (during biocytin spread for example). Use 1mm cut…
I had a bit of a hard time printing the original spool due to the rings not actually being connected, so I did some editing in blender. You might have to scale it a bit on the Z axis to get the fit just right, depending on your printer…
Single chamber meshed 600mL Becker size holding chamber for patch clamp experiment. Allow top and bottom perfusion of the sections for curing in bubbling artificial cerebrospinal fluid (during biocytin spread for example). Use 1mm cut…
Been working on mesh skirts for my Voron 2.4, but nothing was there for the Z-Drive Motor Tension Mod skirts. I found the meshed skirts from 'thunderkeys' and pulled the hex/mesh from those and put them into the Z-Drive mod skirts. Will…
I wanted to have a meshed skirt like other mesh skirts I could find. Additionally, I modified the sides to not require the fans as my system puts the electronics elsewhere. Mirror in slicer to get the other side. The center is a modified…
This model is compatible with the lego system.
I added the infill to the hexagons to allow custom meshes to be applied. Standard Voron settings 0.25 first layer Mesh part I used 0 walls/perimeters 0 top/bottom 20% infill Honeycomb
Played around with c4d moGraph, volume builder and voronoi fracture. Not easy to print at small scales but maybe funny if you have a multi colour unit. Happy Easter!
Been working on mesh skirts for my Voron 2.4, but nothing was there for the Z-Drive Motor Tension Mod skirts. I found the meshed skirts from 'thunderkeys' and pulled the hex/mesh from those and put them into the Z-Drive mod skirts. Will…
Modeled mesh inserts into Noctua fan support to match the hex meshed inserts by thunderkeys.
I wanted to have a meshed skirt like other mesh skirts I could find. Additionally, I modified the sides to not require the fans as my system puts the electronics elsewhere. Mirror in slicer to get the other side. The center is a modified…
This model is compatible with the lego system.
It's a remix of clean shield strap. I've noticed that it was really messed up (don't EVER trust automatic repair!), so I've cleaned it and remeshed. Print instructions I've used Noctuo PETG Medical as it's most durable material of this…
This Voron V0.2 Skirt Remix has a solid 0.6mm bottom layer that is intended to be printed with a higher infill and no top and bottom layers. For printing make sure you add a height range modifier at 0.6mm. Up to this height there should…
Roller Pen with MESH design. This pen model is comprised of three essential components: a cover, a main body, and a tip. The tip component is available in two sizes to accommodate standard ceramic roller refills as well as larger gel…
A refined version of vase1 by davvyk with less jagged edges and smoother surfaces, which was important because in the end I scaled it up to 175% of its original size. I also added a version with drainage holes and a saucer with fitting…
This Skirt set for the Voron 2.4R2 has some added bodies to act as a fine mesh within the big hexagons. Unlike my Voron 0.2 meshed skirts, these have individual bodies for each hexagon. I took inspiration from the V0.2r1 multibody skirts.…
I had remeshed these bondtech fan shroud since Sept, and tested it out since then. the performance is good. These are 2 versions of those: Prusa & Mosquito version. Anyone of you feel like to try these out?
