29 models
The SSUPD Meshlicious fan mount is inspired from chaosmage project. I have optimized the holder to be more stable and is not blocking any airflow. With this fan mount you could improve the VRM and mainboard cooling. Fits perfectly for…
Print these feet to have the coolest meshlicious pc case ever.
While there are a few designs out there to mount two fans on the back of the SSUPD Meshlicious, I wasn't really impressed with any of them, some have misaligned holes, and none of them accommodated two 50mm fans which I happened to have…
The riser works with the stock Meshlicious rubber feet. No supports should be needed as long as you print with the feet facing up. I printed this on an extended ender 3, if you have a smaller printer, you may need to split the model in…
I've you've ever decided to commit to a small-form-factor (SFF) PC build but then later decide actually, no? Then this is the part for you. When assembled on the motherboard side, this side panel will give you another 27mm of height…
The Meshlicious is a great ITX case, in no small part because it supports a 280mm radiator mounted to the front panel. Unfortunately, mounting a radiator and fans inside the front panel makes the inside really cramped, and I found it…
UPDATE 26.01.2022: Different combination of cable types are now added. The following options are now available: DP Vertical / DP Horizontal HDMI Vertical / DP Horizontal HDMI Vertical / HDMI Horizontal DP Vertical / HDMI Horizontal…
This bracket is designed for the SSUPD Meshlicious, to provide a more comfortable access to the video output ports. We have optimized the bracket for ADT Link DisplayPort and HDMI cable. You could use the bracket with the following ADT…
I modded the fan holder for the SSUPD Meshlicious from chaosmage. I didn’t like that the cut out for the fan was blocking some airflow and also added some ramps to assist the stability of the part. Fits great and im still able to route…
Male case clip that fit in the SSUPD Meshlicious. They are quite resistant/flexible in PETG. Just press the “wings” to fit in the slot. Used for my tool-less front expansion mod:…
A simple switch guard for the power button to prevent it from being pressed unintentionally. It can be attached and removed easily and is held in place by the pressure from the USB A port. The USB C part of the print fits loosely into its…
Refer to reddit and PM me there if you need help with this: Serverlicious: An SFF NAS with 9x HDDs for UNRAID and Plex : sffpc (reddit.com)
32mm Front panel expansion to move the 140mm fans to the outside of the Meshlicious
Designed a better solution to mount the Phanteks Neon light strip around an ITX board. It helps to keep the strip in line with the mainboard. Some points to keep in mind. It is offset at the bottom for the pci riser in the SSUPD…
The Meshshshlishshshious has a small square cut out on the rear for your GPU cables. While some people have used this space to create panels for screw-on DisplayPort or HDMI adapters, I bought 90-degree adapter cables that were too long…
I modelled a couple of covers for the SFF GPU slots at the top of the back side of the case. One is made for mounting 2 60mm fans on the back, and the other one has the standard hole pattern of the case for ventilation. They slot in at…
I needed more space but didn feel like spending money on SATA SSDs. So I bought an external one and made a Dock for my PC Case. Works really well. you could probably even use an internal USB Header and not use one from the back. It's…
I designed the foot for this IO board: https://www.amazon.com/dp/B07G13PDK1?psc=1&ref=ppx_yo2ov_dt_b_product_details However, it can be adapted for any board you want to use. The one I have has 60mm spacing between the USB 2.0 ports and…
A support designed for the rear GPU finger in a Meshlicious case. Gives more surface area to support the bracket from bending. This is meant to be used when the GPU is in the higher position and in 4-slot mode. Currently this design is…
I bought my meshlicious second hand and its SFX bracket was missing, which appears to be happening to at least one other person . Enough for me to put in the work! I did not want to miss the support of the rubber block at the bottom of…
Didn't like the red bar on the riser cable, so I made a cover for it. It's a nice tight fit.
Mounting plate for angled male to female panel mount DisplayPort cables for the SSUPD Meshlicious case. I used the case in 4-slot GPU mode with the following cables:…
Inspired by the many other designs available on thingiverse. Mostly based mine off of SSUPD Meshlicious rear GPU cable bracket for extension cables by fanatic789 . Thanks bud! I redrew it from scratch myself because I needed to add the…
Updated the original Model with a Lid to add an LED-Strip. Printed 5mm with transparent Filament. Layer Height: 0.2 Set a pause to change Filament at Layer 95 and 120
This is a work in progress. Currently the bottom middle screw hole is slightly too low to lineup correctly. Also, the bottom holes are a touch too small for the heat set inserts. This is my first design. Uploading it as a request. I…
This bracket allows you to fit an EKWB EK-AF passthrough at the top of your SSUPD Meshlicious PC case to use as a fill/bleed port. The port is recessed and does not interfere with the lid of the case. This version fits the case with the…
Edit: 2022-03-28: Created a v2 that's a bit thicker and has an additional passthrough for a GX16 connector. It turns out this last connector is actually in the way of the PCIe horizontal bar, and should be raised about 10-15mm or so…
Additional cooling for the Meshlicious ITX computer case. Fits a 90mm x 14mm fan and attaches to the center spine of the case.
![[WIP] Meshlicious GPU Back Brace](https://media.printables.com/media/prints/138918/images/1320390_9b2b4c91-97e4-44ca-8e61-ce825eaca75a/20211222_140227.jpg)
