Counting matching models…
This is the perfect toy to fidget with when you are bored, it makes a satisfying sound when you use it. It is also great if you want to prank your friends, just put the finger down, lock it, and unlock it infront of them. It is great…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
Quick remix of Paul's cool Under Desk Drawers with a hidden keeper so it doesn't pull out too far and a no-holes drawer option . All parts fit in a MK4/3 single print. Twisting keeper allows for less fumbles during assembly while still…
No supports are needed!!! This is the official periodic table of ELEMENTS! All the elements, Hydrogen to Oganesson, all 118, are on the stl. file. This is a great present for a science teacher or someone who loves science! (It was mostly…
Remix of a LOTR Journeys in Middle Earth player dashboard I came across. Modeled up from scratch in fusion360 to add player card holder slits, plenty of inspiration token holders, and works with the sleeves on the smaller cards. I had to…
A stamp wheel from the Aztec Collection #15 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
A stamp wheel from the Aztec Collection #14 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
WARNING: Magnets currently do not sit flush without post-processing! Given the weight of the wires etc you put in the holder, there's no need for 4x2x4=32 Magnets. If at all, having some in the outer corners should be sufficient.
My mod for “ Under Desk Drawer by Paul ” the same mounting holes.
A stamp wheel from the Aztec Collection #13 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
Complete Storage Solution for The Lord of the Rings: Journeys in Middle-earth (Base Game + All Expansions) This project is a full organizer and complete storage solution for The Lord of the Rings: Journeys in Middle-earth , designed to…
Had one of the springy parts of the "middle-section" break and noticed it was designed with sharp 90 degree cuts at the weakest point(which is where it snapped). So I added fillets to hopefully improve longevity of the part. I also cut a…
Well, my fan hub is ugly so I want to hide it. Plain and simple!
I created a cardholder in the style of the original model that fits in the middle section for additional card storage. I did this so that I could replace the middle token/dial storage with more card storage in the Lord of the Rings Saga /…
I Created this tray to hold 3 pieces of the Pittsburgh 4pc impact extension set from harbor freight. #67926. It also hold the Pittsburgh 1/4, 3/8 dual head ratchet from harbor freight #67993 Lastly this holds the Titan 8 piece External…
A quick and dirty key holder specifically designed for the MX Keys keyboard. First, attach it to the edge near the space bar, and then pull it over the edge on the backside. I created this to hold down the F key in Palworld.
Cut the lid middle file so it doesnt require supports, you will need to print two of the lid_middle_cutouts. Get the rest of the files from the original model page.
The map is split into four parts, which need to be printed separately and slot together like a puzzle, and the mini models and banner. There are five build plates, one for each map section and one for the rest of the mini models and…
Tray to store tokens (inspiration, search, person, depletion, darkness, ...) from all expansions.
Tray to store all battle tokens from all expansions.
Trays to store all (unsleeved) cards from all expansions.
3 stamp wheels from the Leather Middle Collection Vol.1 (1-3) These digital 3D printable models are meant to be used to create textures in clay, polymer clay EVA foam, and other materials. We want to make more models like this. If you…
Sandworm 3D printer - Chassis Middle: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
I wanted to address an issue many people have been having with a loss of spring tension over time. Unfortunately, due to the properties of plastic (even PETG), if a spring is kept under tension (such as when the box lid is closed) for a…
>HŽ CARGO logo pendant of HŽ 2062 0XX, Three variants: smallest, middle, and large 200mm >HŽ CARGO 2062 0XX Croatian Disel locomotive EMD G26 Print with pla 0,4 0,3 or 0,2mm nozzle Enjoy!
This is a cool holder that I designed to be funny, and serve a purpose. This holds rings larger than 17mm on the middle finger (basically all rings) and this model will most definitely need supports, as the fingers otherwise would be…
Middle finger candle holder for 20 mm candles
Middle Pipe for Custom Ninebot G30 Front Suspension This part is currently in production. All CNC files are available for use. Required components: 1x DIN912 M4 6mm Compatible bolt sets are available on our Printables.
I was tired of breaking the rear-middle seatbelt holder, sometimes referred to as a webbing belt holder or an upper quarter trim holder, (Part numbers 64728FG011JC, 64728FG010JC or 64728FG010JG) so I modelled my own in Blender 5. Should…
Please be aware that one side is wider than the other, so there is a "correct" orientation for the pieces. I loved the model by @Shonk, but wanted some small and simple ones for tracking unused and taken actions in Lord of the Rings -…
It's a fun middle finger head band. I would suggest .16 of lower layer height in a petg filament or something strong & flexible
This model is compatible with the lego system.
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
I printed a middle finger octopus and 2 arms failed. I dont want to print the whole octopus, so i combined the two model a source. Just one repeatable arm to repair my middle f octopus :) no support needed activate detect thin walls There…
Print material Pet-G Infill 20% Perimeter 3 or more
Introduction This planter is a small unapologetic companion for your plants sitting boldly with a raised middle finger and zero regrets. Its simple defiant shape adds humor and attitude to any space and gives your plant a personality that…
Introduction Paid members exclusive version. One hand. This planter is a small unapologetic companion for your plants sitting boldly with a raised middle finger and zero regrets. Its simple defiant shape adds humor and attitude to any…
Design is already great I just added the holes to turn it into a middle support
Finding a silica gel box for the Honda ZRV (EU), HRV(US) 11th gen Civic that fit in the little tray area under the centre bridge seemed to be hard, so I took messurements of my one and decided to make a box for myself! there are 4 corner…
Not totally tested for strength so take care . Crutch walking middle handle. Easier to reach if seated. Use strongfilament M4 X 20mm bolts M4 X 15mm bolts M4 locking nuts M6 X 50 Bolts M6 locking nuts All 3D Prnted at 100 % infill. The…
The map is split into four parts, which need to be printed separately and slot together like a puzzle, and the mini models and banner. There are five build plates, one for each map section and one for the rest of the mini models and…
🖕 Middle Finger Decor – Bold, Clean, and Unapologetic Make a statement without saying a word. Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted the Z-top height on supports for…
Bring a touch of humor and personality to your workspace with this bold and eye-catching 3D printed desk holder! 😄 This unique design combines a clean, modern geometric container with a playful and cheeky middle finger detail, making it a…
Minimalist Middle Finger Line Art – Bold Wall Decor Description: Add a touch of cheeky elegance to your space with this minimalist line art featuring a stylized human figure and a bold middle finger gesture. Designed for wall mounting,…
Middle Finger Easter Bunny 🐰🥚 (Because not all bunnies are sweet…) Tired of the same cute, wholesome Easter decorations? This little guy isn’t here to spread joy… he’s here to send a message 😏 Few supports are needed. I used organic-style…
The Middle Finger Gnome 😈 Not your average garden gnome… This little guy has had enough — and he’s not afraid to show it. With a bold stance, detailed beard, and a perfectly unapologetic gesture, this gnome brings attitude wherever you…
Closes the gap on the original Prusa spool holder to ensure a smooth sit of the filament rolls.
🧟♂ Zombie Hand – Middle Finger Edition 🖕 Fresh from the grave and already fed up… this undead hand doesn’t hold back. Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted the Z-top…
🖕 Middlefinger Capybara – Chill, But Not That Chill Meet the most unbothered creature on the internet… until now. Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted the Z-top…
This hilarious contactless paying wand will turn heads wherever you go and make people laugh every time you tap to pay. It prints in 3 parts: the middle finger, wand and bolt. You can quickly screw the hand in and out, to add your card in…
This is designed for the Prusa Core One and spools with large middle holes (arbors), this one specifically made for Giant Arm filament (but will work with any filament that uses this exact same widely manufactured spool). Without the…
Betonový kvetináč pre modelárov v mierkach: 1:43, 1:72, 1:87(H0), 1:120(TT)
This is a clean, no-fuss mount design for Two panels side by side 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter…
I already made an MagSafe mount for the Cupholder of the IONIQ 5, yet it was really usefull, the looks always bothered me, and as the car already has a space for a wireless charger, (which never really worked well for me) so I made a…
its straight forward. Dog tag + middle finger = a middle finger on a dog tag
A replacement bin to suit the low profile packout organised with a cutout to suit the lid. This is a cut down version of the bin from maxelman. I just reduced the height to 45mm.
I ended up breaking the middle connector on my soft 3d printer enclosure that I bought from Amazon so I printed a new one to fix it since I couldn't find one anywhere. The brand I bought was the “Ausbond 3D Printer Enclosure” from Amazon…
3 stamp wheels from the Art Deco middle Collection Vol.1 (7-9) These digital 3D printable models are meant to be used to create textures in clay, polymer clay or EVA foam and other materials. We want to make more models like this. If you…
3 stamp wheels from the Art Deco middle Collection Vol.5 (13-15) These digital 3D printable models are meant to be used to create textures in clay, polymer clay or EVA foam and other materials. We want to make more models like this. If…
This is a model of the middle section of the Bonesborough Market from The Owl House. This is a continuation of an earlier model The Owl House Market and the last two images show both combined. This model consists of 11 structures. These…
Give me the finger! Funny to flip people (yourself) off. Z 50mm fits my middle finger. (ring size #6) Z 60mm fits my thumb. (ring size #10) You could try your size! Recommended to add some skirts when printing. Have fun! Follow my IG ▶…
I always struggle to get the bed leveled on my Ender 5 s1. I print this model to help me adjust the z offset. I then print my other model, First layer calibration 200x200 four corners Ender 5 s1, and manually adjust each corner until they…
I wanted a facedown version of the original to print. For whatever reason when remodeling the card, I decided to also make it double sided. Painted 3MF also available.
I copied the design geometry from Victor Mateus Oliveira and made a bottom middle bracket for the 3mm foam tape, it should help reduce any gap in the middle bottom without having to print an additional latch allowing the bottom of the…
This is a remake of the Punisher version of the middle piece from the front bumper for the Peugeot 2008,3008,5008 models produced from 2016 to 2020. did not try it on the facelift after 2020… Printed with tree support and brim, easy…
This model is compatible with the lego system.
Some interesting golf tees for ya! They are both 80mm tall which is actually still pretty tall for most but I've looked at theses models for too long so I'm just putting it out there! I've uploaded the STL files with the tees in the…
I added a middle holder to this fantastic spice rack from Linuxx for ultimate support. It works pretty well in our kitchen since a couple of years. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No…
An extra support foot for your ERCF v2 build. This one supports the ERCT buffer and LED Apron. Note you need an extra 16mm SHCS screw, to replace the 8 mm one going through the Support Arm Mount. Category: 3D Printer Accessories
Einleger für den Becherhalter in der Mittelkonsole des Opel Insignia Bj. 2016. Darunter passt noch etwas Kleinzeug oder eine Brille. Er sitzt recht lose und könnte evtl. noch etwas in Länge und Breite hochskaliert werden. Ich empfehle als…
A simple yet cool-looking Nerf visor to annoy your opponents Features Fits every Nerf mount Looks cool Annoy your opponents Dual-color possible with color swapping at height 9.20 mm Recommended print settings Layer Height: 0.2 Use default…
Print with the base down, no supports needed. I printed in PLA. Happy Printing!
Middle Finger Ghost 2 Color AMS Powered by MakerWorld-Image to Keychain (https://makerworld.com/makerlab/imageToKeychain) Commercial License Membership Available in Bio
Organizing insert for The Lord of the Rings: Journeys in Middle-Earth board game by Fantasy Flight Games. Allows to hold and organize the game and all expansions in the game box (I created the insert before the last little “Scourges of…
My Gfs sunglasses broke so I looked online for this piece to print but the best one I could find wasn't curved properly and cut into her nose. So I decided to measure the broken piece and recreate it almost exactly the same as the…
If you want patreon exclusive models, any of above 3D models, new/upcoming models or need commercial license, please visit my Patreon . By joining, you'll gain permission to sell my models, exclusive designs, private community support and…
euro coin collector car middle console bottle cup holder ford
Never saw much use for the cup holder in the middle console of my Polestar2. So I decided to design a piece to organize stuff I use and need more frequently. There's room for: 4 charge cards A coin for shopping cards. (modelled after a 2…
Tray to store tokens (inspiration, search, person, depletion, darkness, ...) from all expansions.
Tray to store all battle tokens from all expansions.
Trays to store all (unsleeved) cards from all expansions.
3 stamp wheels from the Leather Middle Collection Vol.1 (1-3) These digital 3D printable models are meant to be used to create textures in clay, polymer clay EVA foam, and other materials. We want to make more models like this. If you…
3 stamp wheels from the Leather Middle Collection Vol.2 (4-6) These digital 3D printable models are meant to be used to create textures in clay, polymer clay EVA foam, and other materials. We want to make more models like this. If you…
3 stamp wheels from the Leather Middle Collection Vol.3 (7-9) These digital 3D printable models are meant to be used to create textures in clay, polymer clay EVA foam, and other materials. We want to make more models like this. If you…
3 stamp wheels from the Leather Middle Collection Vol.4 (10-12) These digital 3D printable models are meant to be used to create textures in clay, polymer clay EVA foam, and other materials. We want to make more models like this. If you…
3 stamp wheels from the Leather Middle Collection Vol.5 (13-15) These digital 3D printable models are meant to be used to create textures in clay, polymer clay EVA foam, and other materials. We want to make more models like this. If you…
Middle plate used for the Ferris Sweep. No special instructions for printing.
Lord of the Rings Duel for Middle Earth token holders It fits into the existing insert but makes it easy to take out the coins and player pieces. If it's too tight, reduce the file to 95-98%. But for me, it fits perfectly. UPDATE: Added…
![[FULL GAME] LOTR: Journeys in Middle-earth – Organizer / Insert (All Expansions)](https://media.printables.com/media/prints/85015888-3dbf-4b8d-b323-b0154f11b917/images/11575651_838f240b-733c-4e53-a2be-54a246e87f80_b41c6a9c-a66c-4d3b-97b5-82932ea028c0/lotr_insert_-0-title.jpeg)
