Counting matching models…
I made these two disc golf discs. The Drunken Sailor is similiar to a Gatewat Spear, but more overstable, and the other disc is like a buzz and a condor mix, that is more overstable. Print these in tpu if you want to actually use them. I…
This adapter is for the smaller midrange speaker style used as a center, rear and on some models in the doors. Fits many BMW and MINI models from the E, F and G generation. The inside of a car can get hot, use a heat-resistant filament…
STL contains the standard Buzzz model, F3d contains that and my CAM setup for making the disc out of wood. Model may be a little off since I made it with mostly calipers and a dream. Testing my wooden disc(s) here:
Flight numbers are ~ 5/3/0/3 I recommend printing in a firm TPU such as Overture HS TPU If you're looking for a PDGA approved disc, you may want to print my Cricket After getting the Cricket approved, I wanted to make a midrange, and…
Support Tweeter and Midrange for Brax Model ML28 and ML3. Print in PETG
best way to print is when you put the model upside down and split it on 7mm heigth and after printing glue two half together. Use ABS.
Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) for the alpine S2S69c
A clean and minimalist 3-inch midrange speaker enclosure , perfect for compact audio setups without compromising sound quality. Designed with simplicity in mind, this enclosure provides optimal volume for midrange clarity while keeping…
i designed an innova roc like midrange love to get someone else to print it and give some feed back
Bang & Olufsen Penta speakers need midrange foam surrounds as part of their refurbishment. This simple tool just makes the job a bit easier. You set the foam or rubber surround on this for easy gluing, hold it steady and provides a hard…
a steeper angled part (50 degrees) to improve the directionality of the tweeters, with the sweep starting on the bottom surface to prevent touching the windscreen. best to print this in PETG or ABS, as with direct sun, it could get quite…
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
a bracket for the S2s69c 3" midrange driver for a subaru
This mounting solution used the factory location with the factory screws to let you mount any tweeter component speaker with a screw mount that you desire. The hole is currently set to 40mm, but i have included the f3d file to allow you…
I designed this midrange disc golf disc at the request of my son, an avid player who wanted to test custom geometries on the course. According to his feedback, the profile yields a reliably overstable flight path. It serves as a…
A midrange speaker bracket for the 6th generation Celica. This fits my 1995 which had the 8 Speaker system.
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
i designed an innova roc like midrange love to get someone else to print it and give some feed back
Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) for the alpine S2S69c
this is a cross between a harp and a zone printing with tpu it comes out to around 161 grams feel free to let me know what you think or if you have any questions
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. This stand is for all Helix Compose…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. This stand is for all Helix Compose…
