382 models
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
This Mighty StealthRuler has been designed for every printers . Stop using a caliper to mark your filament to 120mm and 100mm ! Now, you have this tool that will assist you when you calibrate your extruder and will Never Gonna Give You Up…
A remix of the amazing crocodile skink with a seat for a Lego figurine! Model is scaled to fit on a Prusa Mini. The gcode file includes a filament/color change, since everyone knows that dual color lego lizards are the mightiest of them…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
A large, solid stand for the STORZ & BICKEL Mighty+ vaporizer. Flared towards the bottom for stability. Around 54g when printed with 100% and around 35 with 20% infill . You may have to scale it to 100.5% - 101% in your slicer for an…
After going through my Power Rangers Collection theres still quite a few to upload. Here is a very cool one of the many still to come, Cheers Jace
16mm spin-down +/- Might Dice for playing Riftbound TCG! These are six-sided dice ranging from +/-1 thru +/-6. Based on the design seen on-stream at Shanghai Nationals 2025. Featuring rounded corners, print with 100% infill for a…
Paw Patrol Mighty Pups Badges. made with Prusa mini no mmu required
This is my first 3D design and the first large project I have printed. It is an organizer/insert for the board game Mansions of Madness (2nd ed) with all its expansions (including Recurring Nightmares and Suppressed Memories) fitting…
I didn’t realize that the Mighty+ doesn‘t ship with a Filling Aid tool like the original Mighty did, so I went and made my own. This model should fit the Mighty/Mighty+ and Crafty/Crafty+ from Storz & Bickel. Since the tolerances on the…
Headphones stand, code name "Mighty Duck", with optional parts depending on the use case and/or aesthetic preference, designed to be printed with color (filament) change for that added flare. STEP files are included for convenience. STL…
If It Moves, It Might Be Food 🦈😂 Meet Bitey , the self-proclaimed king of the ocean… or at least of snack time. With those sharp little teeth and that mischievous grin, he looks like he just heard someone say "all-you-can-eat buffet" and…
It stores all contents of the Journeys in Middle-Earth game in the core box and its two expansion boxes. The core box holds all the minatures, the battle field maps and the rules. One expansion box contains all the cards and tokens and…
To install this you will have to take part of the build platform apart. Printable in resin or as a filament print.
Description ⚙ WARNING: My Sense of Humor Might Hurt Your Feelings. This sign doesn’t just warn — it threatens emotional instability in anyone lacking sarcasm resistance. Printed with enough boldness to make OSHA nervous, it’s the perfect…
holds 32 dosing capsules. enjoy! please show your print. Thanks
Mighty Mouse, an American animated character created by the Terrytoons studio for 20th Century Fox. He is a superhero mouse, originally called Super Mouse, and made his debut in the 1942 short The Mouse of Tomorrow. The name was changed…
An totem pole carved from the trunk of an old tree. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Storz and Bickel Accessories Filling Tool Funnel Storz and Bickel make great products; however, one of the biggest issues with the filling tools is that it's difficult to fill. Plant matter gets stuck in the center and falls out the side…
3D model of Zote the Mighty from Hollow Knight. A fan-favorite character, perfect for games, animations, renders, or 3D printing. Optimized for collectibles, fan projects, and creative use.
Tuned profile for printing with Fiberflex 40D filament. Optimized for use with supports, HQ surface finish and multiple parts printed at once. Out of the box, you get a little bit of stringing, and also great finish and flat seams. Below…
Stealth travel case for Storz & Bickel Mighty vaporizer, as well as up to 11 dose caps. Big thank you to my brother for originally designing the dose cap holder. This uses a Pelican 1040 case to hold everything together and keep…
A 3d model of All Might from My Hero Academia posted and converted for easy drag and print. first measure the distance betwen the case's bottom and gpu's height when at the proper lifted height, then apply that measurement to allmight on…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Check updates at the bottom This blaster cuts the plunger volume by half so it only shoots bamboo darts at 100 FPS with a K25 spring... Update: 120 FPS with a K25…
Helps you hold backing on hooping. Much easier to align. Remove before embroidery.
I needed an organizer for the complete Mansions of Madness board game with all its expansions and sleeved cards. To fit everything in the four boxes (MoM core box and its three big expansions), I had to put the monsters onto smaller…
Changed the other end of the Herb Tool's shovel to a tamper that measures 12.5mm OD and is designed to fit the Venty vaporizer from S&B, but will fit a variety of other ones as well. Don't use on warm items. I printed in [dried] PETG with…
A simple vet cover for Phrozen Mighty 8K Included STEP file for anyone who wishes to edit or modify -NatNell
3D Printed Ice Hockey Puck with Mighty Ducks Logo Textured Wall Surface Printed in PLA - no supports required. Surprisingly glides across tiled surfaces!
The box for the badges. made with Prusa mini no mmu required
A simple stand for the STORZ & BICKEL Mighty+ vaporizer. Slightly flared towards the bottom for increased stability. Includes a rather large cut-out for the USB-C port to accommodate even the thickest plugs. Available in single-direction…
My first remix - updated the vape case to fit the Mighty +, moved the charge and power ports on the print to fit the new locations of the buttons. Printed with PETG so there was a little stringing, but it cleaned up.
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
- Print upside down - Enable supports - I printed at 0.12mm layer height Hope you like it :-)
Have fun! UPDATE: Added version 3. Would recommend to print this version. Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
The official cleaning manual tells you to use new screens every time you clean your device. This seems very wasteful, in my opinion. Trying to bend the screen by hand is imprecise and can land you a new, unintentional piercing. I've…
Quality of the yellow rail is utter sh*t. This will together with some glue will mend the rail.
Are you too drunk to know where your toilet is? Want to let your guests know where not to enter? Do you find yourself in confusion entering living room with pants halfway down? None of this is problem anymore with this sign! Slap it on…
The original karambit model I was playing with was too gosh darned small, so I grabbed one I like off Thingiverse ( https://www.thingiverse.com/thing:3367382 ), upscaled it and tweaked it a bit to take M3 hardware. The name is silly, but…
Shoot me a message if you have any suggestions. Trying to build the most convenient boards to expedite HoMM3 gameplay. The two boards come together with dovetails at the ends.
Welcome back guys! I made this model a whole while ago and decided to release it now! It's the longest 3d printed sword I have seen, its 2,15m long! READ THIS BEFORE PRINTING This is a model just for fun to show of . The retracting blade…
All i did to the existing model is add a chamfer under the fins that lock the funnel in place. Well, actually a chamfer didn't work in OnShape. I sketched the ‘chamfer’ at either ends of the fins and used a loft with a path to follow the…
Simply slides onto the printer as would your print bed, enables you to twist down the knob and lock it into place. Then you can slide on your print bed at an angle and enable it to drip.
Compatible with the Mighty+ (not tested with regular Mighty model, let me know!) This pressure-fit stand slides on to the Mighty+ and keeps it standing upright while charging or regular use. Handy if used with WP adapters, it's been a…
Based on Lukass‘s idea, i’ve redesigned from scratch the whole thing. https://www.thingiverse.com/thing:2872736 How it looks: Curves are based on Pappus'spiral (take a look here:…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice 20250531 Update Added a mag insert for single-round reload My build is using Sillybutts Brassless breech, and the better printing ram base. This should follow most of…
Hewo, I want to share my idea to organize items from the Heroes of Might and Magic III Board Game. There is no place for storing things from all DLC's in one place, so I made one myself. I made boxes for cards, tokens and cubes. Box for…
I’ve created a remix of the Dummy 13, transforming it into a Mighty Morphin Power Ranger! The model is organized with pieces separated into folders by color for easier printing. It includes both a free-supported version and a 2-piece…
A hoop for the Mighty Hoop 5.5. Due to the low surface area, I would recommend printing in PLA with an inner brim.
This is a mod for the Phrozen Sonic Mighty 8K/12K. It is a lid spacer/riser and frame for a PTC heater and W2310 temperature controller. The spacer is used so that there is no drilling/cutting of the cover and base for cabling and…
Hi there! I 3D printed @3Demon ‘s Andúril/Narsil model and needed a way to hang it from the wall. I designed this small wallmount that will hold it with a single screw. Sword model:…
easy clip on drip hanger for the build plate and also works as a stand/foot for the Phrozen3d Sonic Mighty 8K
This is a simple an minimal holder for the Melodrip and designed to fit on top of an Orea V3 filter holder. Both small (155) and big (185) versions are supported, although I didn't test the small one myself. Feel free to comment regarding…
Rodin's Mighty Hand or also called the Clenched Hand was one of the only sculptures of hands that Rodin considered as finished sculpture by themselves. Scaled to 175 mm height.
These are several STL files to print your own command center for the Mighty Morphin Power Rangers Lightning Collection. You don't need every file for it. You can decide for yourself what parts you want. I will place the parts inside a…
All Might My Hero Academia Wall Art Category: 2D Art
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This is my own design and depiction from scratch of the power crystals from Paw Patrol Mighty Pups movie. It is not based on the original design from the series; really just a right-sized, faceted crystal of similar proportions. Printing…
This drip stand takes inspiration from a few others out there in particular https://www.thingiverse.com/thing:4671138 and https://www.thingiverse.com/thing:3784926 It is designed for the 32.5mm height vat of the Phrozen Sonic Mighty 8K.…
Hey! This is a dosing capsule dispenser case combo that was modeled and inspired from the Mighty case which I completely recreated his case model from scratch. ( https://www.thingiverse.com/thing:4658819 ). But with the added dispenser…
Printer : Bambulab X1C Filament : Overture Pla General settings Wall loops: 2 Infill: 8% Sparse infile pattern: Gyroid (I just like gyroid infill) Support: Tree Normal supports should work as well. Make sure that no supports are generated…
I’ve created a remix of the Dummy 13, transforming it into a Mighty Morphin Power Ranger! The model is organized with pieces separated into folders by color for easier printing. It includes both a free-supported version and a 2-piece…
The Little Rocket Mighty Mama is a 3D-printed blaster designed and engineered by Tarik. It takes the Little Rocket's minimalist springer concept to new levels with a maximized plunger volume and spring load. With the larger plunger volume…
🔥 Popis Tato detailně propracovaná fantasy miniatura zobrazuje mocného Démonického válečníka, inspirovaného ikonickými pekelnými jednotkami z klasických strategických her. Postava stojí v dynamickém bojovém postoji, oděná v těžkém…
I always been a massive fan of power rangers growing up. So I made the red Power Rangers from Mighty Morphin.
I printed at .2mm height with 5% infill. No supports needed.
Almight has is holding his wonderful ice cream.
Hi, I've made a simple design for the Heroes of Might and Magic III - The Board Game to hold the three main decks for the play sessions. It was designed to fit all cards from all expansions with sleeves. I used mouse brim at corners to…
EDIT - add another inlay for extra tokens under the castle boards (check photos) EDIT - add cards tray for sleeved cards (expected place for cards from new campaign), print 2x
Version 2, Sun Dec 20 2024 Replacement shell for repair of Storz-Bickel Mighty vaporizer. USE AT YOUR OWN RISK Please watch the temperature, do some research before choosing the right material & use. Please share your experience! Hope you…
Oathsworn's included tray isn't the best fit for sleeved cards (although it's pretty close). This is my attempt at one with a little bit more room for the cards, whilst still fitting the lid. I used Sleeve King “Everdell” sleeves - I…
Bring the power of Olympus to your collection with this stunning Greek God Bodybuilder Statue. Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller options and exclusive monthly…
🐂⚔ Minotaur – Heroes of Might and Magic III | Fantasy Miniatura pro 3D Tisk Minotauři patří mezi nejvěrnější a nejneúprosnější válečníky podzemních frakcí. Tento detailní 3D model zachycuje jejich ikonickou podobu známou z Heroes of Might…
This sculpture of the main man is surprisingly easy to print with organic supports. Incredible detail! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A small, easy-to-print, no-frills dosing capsule filler for the TinyMight. It may work for other capsules, I haven't tried. It is easily customizable online through OnShape, though! I printed the base with 0.32mm layers, you can go fast,…
I needed a build plate hanger for the mighty 4k, but all of the designs I found required fiddling with the bracket before use. This design replaces one of the handles so that you can simply loosen the knob, reorient the position and…
Birthday cake fire extinguisher, plus a birthday sign. I've included a couple of print sets which let you print the Tank red and the Hose & Handle in a different colour such as black.
These are card dividers for my insert/organizer for the board game The Lord of the Rings: Journeys in Middle-Earth. These dividers are in German.
Mighty Morphin Power Rangers - White Ranger Tommy -1994 3D printable model.
13 cm vysoký Mighty Morphin Power Ranger
soooooo this is a Modular Holster I designed. I took big inspiration from the OpenSource files of T-Rex Arms SideCar. Should work with many Pistõlas, as long as you have a TLR-1HL light, maybe even O-Light PL2 The “Friction Washer” is not…
Hi I designed a damage counter working with two magnets. I used 6x2 round magnets and it works ok. For one battle 10x counters should be enough. Compatible with MMU / AMS
Another Funny Sign in my collection - “Courage is knowing it might hurt but doing it anyway, Stupidity is the same. That's why life is hard.” , dual colour design, printed in OVERTURE Silk PLA Rose Red and ZIRO Black PLA. For more funny…
I had a water pipe adapter (WPA) from Planet of the Vapes (POTV) for my Storz & Bickel Crafty+. Unfortunately, it didn't fit the Venty. So, I spent some time learning Fusion to create a modified plastic ring to fit the Venty. It uses the…
Mighty Morphin Power Rangers - Kimberly in Shorts - 1993 3D printable model.
Meet Gnomeward the Brave , the fearless defender of the garden realm! Don’t let his small size fool you — this bearded warrior packs a punch with his trusty sword and sturdy shield. Clad in detailed armor and topped with a pointy helmet,…
Heroes of Might and Magic Board Game has an excellent insert available on Maker World . This model is an insert into that insert that utilizes some of the unused space to store tokens in trays - tokens that would otherwise have to be in…
This is home made model rocket, designed around the A10-3T model rocket engine. It was designed as part of my attempt to learn FreeCAD. The final design was launched, flew well, and was successfully recovered. Assembling the rocket: Print…
.2 resolution 50%infill may set up eBay link if you are shopping In the process of making other reef equipment and plumbing Brackets/tools
Just added 20, 100 and 120 numbers on both sides. Nothing spectacular, but heplfull
Mighty Morphin Power Rangers - Yellow Ranger Trini - 1993 3D printable model.
Lord Zedd , referring to himself as the Emperor of Evil , is the true leader of the Evil Space Aliens and one of the two main antagonists of Mighty Morphin Power Rangers , one of the two secondary antagonists of Power Rangers Zeo , a…
Mighty Morphin Power Rangers - Red Ranger Jason - 1993 3D printable model.
Mighty Morphin Power Rangers - Pink Ranger Kimberly - 1993 3D printable model.
I really love my Phrozen Sonic Mighty 4k, but the hood that covers the printer/vat area was a big nuisance. Every time a print was ready you needed to remove it and put it somewhere where it didn't stand in the way. Another thing that…
I made a nice enclosure for my resin printer. It has a built in air purifier, curing chamber, storage and wheels for me to roll it around. This last feature was great when I had it in a room with a nice level floor. Then I moved into a…
smallest tested size in with 15 mm no support needed in anycubick kobra 2 plus
Mighty Morphin Power Rangers - Green Ranger Tommy - 1993 3D printable model
![Heroes of Might and Magic III Board Game - Organizer V1 [ENG/PL]](https://media.printables.com/media/prints/854011/images/6567947_68a9cc2f-57d4-4167-9b5e-51984d067e4f_dae965ce-9c9c-4c18-ac16-e80a8122d668/organizer_1.jpg)
