P
PrintablesDian
Gardena Sileno Minimo Messerteller für 6 und 9 Klingen
Gardena Sileno Minimo Messerteller für 9 Klingen
- Downloads
- 274
- Likes
- 13
- Rating
- 0
Search results: minimo
Counting matching models…
P
PrintablesAngel
Minimod.177/.22 for Air Venturi Avenger
This is the minimod for air venturi avenger, replaces the o.e. air stripper, this help remove that turbulent air away from pellet when exiting the air rifle, does help some with report. print threaded side down with your favorite PLA @…
- Downloads
- 259
- Likes
- 21
- Rating
- 0
P
PrintablesEvilGod
Ground Floor for Ruined Houses by TheMiniMonsterVault
I printed a batch of the Ruined Houses by TheMiniMonsterVault but it was missing different leves of elevation. So I cut up the original Files in Meshmixer and reassembled them to get a complete and a ruined Ground Floor. Original Files by…
- Downloads
- 62
- Likes
- 7
- Rating
- 0
P
PrintablesFlorian Blanc
Minimoa Göppingen Gö 3
This is a static model of the legendary Göppingen Gö 3 Minimoa . The model comes in a ready to use bluid plate. If the outer wing parts are too difficult to print straight up, it might be a good idea to print these flat. Printed just fine…
- Downloads
- 58
- Likes
- 5
- Rating
- 0
P
PrintablesBackcountry Nomad
JetBoil MiniMo 230g Fuel Canister Cap Extension & Igniter Protector
Please read to the end. Important notes are below: I designed this accessory for the Jetboil MiniMo because I wanted to store the larger 230g fuel canister inside the cooking system alongside the igniter. The original cap didn't allow…
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
Printablesbjoern85
533 switchback classic turtle fin for minimortal T
Overengineerd turtlefin for the five33 switchback classic raceframe. You can put your minimortalT antenna trough, just cut trough the part between the round and the long holes.
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesCableFPV
Rotor Riot Bubito Crossfire Minimortal T Mount
This part is intended to be used to mount a TBS Minimortal T antenna Rotor Riot Bubito frame. Parts should be printed using TPU/Flex (Sainsmart recommended) with a minimum of 80-100% infill and .15 resolution.
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
Printablestommasob
Proxxon Minimot Clamp für MF70
Wenn man mit dieser Halterung eine Minimot an eine MF70 anflansscht, kann man in der Vertikalen schneiden, statt in der Horizontalen. Das kann kompliziertes Einspannen ersparen. Festziehen der Minimot selbst und Befestigung an der MF70…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
Printablesrbm78bln
Proxxon Minimot 40 Cable Strain Relief
I bet I am not the only one in this world who's cable for his Proxxon Minimot / Micromot drill broke. But as the original cable is cast into it's strain relief, you cannot simply replace it without leaving a big rectangular hole in the…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesNeohhhh
Kamado (Bono Minimo) Fan Adapter
I wanted to test PA6 CF and thought it would be able to handle the heat of the kamado style grill. At least when you are starting to heat up the grill and after 1 hour I measured around 50°C at the metal part. I think you could use it all…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesJuanfra
Trianglelab MiniMosfet holder
This is a support for a TriangleLab MiniMosfet which will fit on a 2020/2040 aluminum profile. It has been designed with Freecad thinking on the less use of material, maybe a full enclosure would be nicer, by now I only want to test the…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
Printablestimf
ZMR250 vTX & MinimOSD mount
Two custom made trays for the MinimOSD and video transmitter modules like the ET200, LT200 and similar sizes. The trays can be shoved between the four back pillars of the ZMR250 frame. Vertical support was not needed in my case since…
- Downloads
- 18
- Likes
- 5
- Rating
- 0
P
PrintablesSascha
Gardena Sileno Minimo 16cm 8Klingen
Das Model ist 16cm groß somit größer um 2cm als orginal aber kleiner als alle die im Netz sind mit ihren 18cm. Das Mittelloch dient zum Feinwuchten falls gewünscht.
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesMicha
ELRS "Minimortal-T" style antenna for Recon 4 FR Microlonrange FPV Copter
I designed a vertical antenna mount for T-style antennas with best reception in all directions. It fits on the Rekon 4 frame with its 16mm distance between the spacers and probaply on tons of other frames too. Printed in Extrudr TPU on my…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
Printablesmbiersack
Aeon Labs Minimote Wall Mount
Just a simple remix of Brantan's Minimote wall mount. http://www.thingiverse.com/thing:1277518 Print Settings Printer: Monoprice Maker Select Plus Rafts: No Supports: No Resolution: .2 Infill: 20% Notes: Using Hatchbox PLA at 195 degrees…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesMINIMOTO_LAB
MiniMoto Educational Drivetrain V1-Fixed
MiniMoto Educational Drivetrain V1 (Competition Edition) A compact, fully functional educational drivetrain designed to demonstrate how power travels from the engine to the wheels. This model was designed for the "Keeping Busy - Toys &…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesGerdS
Housing for Micro MinimOSD
I am actually refitting my old SplashDrone II with a PixHawk 4 Mini flight controller and found a very small OSD module for it. But as it is intended for race copters it is just a board without housing. So I designed a housing for it and…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesPeter Walker
MinimOSD 3DR OSD Case
This is the MinimOSD 3DR OSD Case by Stanleykuenzle, with a modified Case Top with holes for VTX and Camera Plugs coming out of the top as well as a Hole for the MinimOSD Reset. I make no claim to the design and creation of these files.…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesoXiVanisher
EMAX Nighthawk 250 MinimOSD mount
EMAX Nighthawk 250 MinimOSD mount Category: R/C Vehicles
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printables
Vtx and MicroMinimOSD holder for ZMR250
Hi, this is holder for Aomway 200mW Vtx and Micro Minim OSD. One goal was to have easy access to channel dip switches, so when racing with friends there's no need to tear down complete quad ;) Work is still in progress, got to figure out…