Counting matching models…
PMAG Style AR 22lr Magazine 25rd Top is easily replaceable in case of damage. I included 2 styles of followers. The standard one which is the style my older Black Dog machine mags have. Follower 2 is similar to the CMMG follower and will…
Anti Bounce Weight Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact. A separate Locking Pad is fixed in place…
Here's a reference model of CMMG 22LR conversion kit, brass collar version. Accurate enough to design parts interfacing with it. It is not designed to be 3d printed, and making it functional will require major modifications. Check out my…
Model is tight fit. Recommend 102-104% scale for easy fit, if you don’t know use 104 as your bolt will always fit. My setting was 102% for a fit without calibrating filament I leave my BCG out of my gun for storage as well as swap between…
25rd AR22 STANAG Style Magazine Top is easily replaceable in case of damage. I included 2 styles of followers. The standard one which is the style my older Black Dog machine mags have. Bolt Hold Open is similar to the CMMG follower and…
Insert this into your charging handle to prevent gas blowback to your face.
Modern Style Polymer AR15 22lr Conversion Magazine Top is easily replaceable in case of damage. I included 2 styles of followers. The standard one which is the style my older Black Dog machine mags have. Follower 2 is similar to the CMMG…
I made this spacer for CMMG .22LR conversion kits. It's installed in place of the stock AR15 buffer weight, and uses the stock AR15 buffer spring to apply pressure on the back plate of the CMMG BCG so that it has no movement when the bolt…
use the stencil provided to cut the basic shape of the auto trip out of 22Ga sheet steel. (I find that leaving the center hole uncut until after the initial bends provides more even and straight bends, but requires more precise cutting.)…
This is a case that will hold the CMMG 22LR conversion bolt for an AR-15. It also doubles as a regular Bolt carrier group case as well. The Bolt is almost a perfect fit and very little wiggle room. If you want more clearances for the bolt…
Adapter to allow Colt style 9mm ASC Magazines to be used in conjunction with CMMG's Radially Delayed Blowback (RDB) uppers. Designed to snap into part of the mag catch cutout, as well as the the first witness hole for round counts…
Simple box that will store a CMMG .22 conversion bolt or an AR15 bolt while the conversion bolt is in use. Lid slides on and off easily. Added a separate file for a lid with raised letters. The raised letters seem to print cleaner for me.…
This is a case that will hold the CMMG 22LR conversion bolt for an AR-15. It also doubles as a regular Bolt carrier group case as well. The Bolt is almost a perfect fit and very little wiggle room. If you want more clearances for the bolt…
A remix of my previous remixed BCG case - this time for CMMG .22LR conversion kits. This version will not fit a standard AR15 BCG. The cap is designed to ride against the shoulder of the chamber insert as to protect the mouth of the…
Rugged parametric box for the CMMG 22LR conversion bolt with 3x old style STANAG mags (see pics). Uses 30mm screws for the hinge. For anyone wanting to add to their own box with different settings, an insert file as STEP is provided. You…
This is an insert you can place in your charging handle when using the CMMG conversion kit for your AR. Fits the entire length of the handle including around the gas tube.
Recomend PETG, but will work with PLA Hinge and clasp pins sized to use a piece of filament. Insert the filament and cut it so that aprox 1/8" (3mm) is protruding, then with a soldering iron or hot knife, melt the ends of the pins back to…
This is to store two Cmmg AR-15 to .22 LR conversion bolts and six magazines. The prints are a better way to store firearm magazines on a multiboard. They allow easy installation and magazine retention. They will NOT allow forward removal…
Uchwyt boczny na dwa magazynki do AR15 lub do CMMG (.22lr). Uchwyt mocowany na magnes główny D20 (śruba M4 o długości ~25mm) oraz magnesy boczne płytkowe o wymiarach 20x10x1 mm (opcja 1: dwa magnesy boczne, opcja 2: cztery magnesy).…
This is a unit group base for 28mm miniatures, or similar scale. It was designed specifically with the Finnish MMG Team by Warlord in mind, but would work for other teams with one standing or kneeling figure and two prone figures. There…
Uchwyt boczny na trzy magazynki do AR15 lub do CMMG (.22lr). Uchwyt mocowany na dwa magnesy główne D20 (śruba M4 o długości ~25mm), dwa boczne magnesy oraz magnesy boczne płytkowe o wymiarach 20x10x1 mm). Standardowe PLA, wypełnienie min.…
A screw-on, magnetic case for storing and carrying the CMMG Bravo conversion.
Magazines slide in, with very slight resistance to hold tight. 3 and 5 mag options. There are 2 versions of each holder, 1 with holes to reduce filament use or 1 without. The one with holes is still strong enough to hold mags with no…
Hummghurt (n). : A mixture of hummous and yoghurt This is for everyone who has ever picked up a large yoghurt pot in one hand, and a hummus tub in the other, and thought "these really ought to clip together". You need: 1 x Hummus tub…
Uchwyt na dwa magnesy D16 oraz jeden D20 (dla stabilności). Śruba M4. PLA, 210 stopni
Uchwyt na magazynek 10 nabojowy do konwersji CMMG do AR15. Magazynek typu: BLACK DOG MACHINE AR-15 SONIC WELD MAGAZINE 22LR 10RD)
I ran across Down Range while looking for simple wargaming rules and decided to knock out some simple 15mm (RISK-piece size; aka very tiny!) models to work on my FDM machines. This is a generic standard infantry soldier in the prone with…
this is a replacement part for the eschbach 440Hz tuning fork usually used in almost every ENT doctors pocket for basic hearing diagnostik. Once it fell on the ground the foot breaks into peaces. the produces does not sell them seperatly…
You can find the live update on github: https://github.com/eamars/OpenKrissDMK22Magazine Uses standard kriss 10/15 round magazine main spring (0.6mmWD, 0.9mm OD, 250mmL)
Uchwyt pionowy na pudełko do konwersji CMMG oraz dwa magazynki do karabinka TOZ 17. Uchwyt mocowany na dwa magnesy D20 oraz śruby M4. Wydruk: dysza 0,2, temp. 210, standardowe PLA.
This can be inserted into CMMG 25 round .22lr magazines to limit them to 10 or 15 rounds depending on the file you print. Simply: Remove the base plate ( Tutorial Video ) Detach the spring Insert printed part Reassemble with the printed…
You can find the live update on github: https://github.com/eamars/OpenKrissDMK22Magazine Uses standard kriss 10/15 round magazine main spring (0.6mmWD, 0.9mm OD, 250mmL)
Uchwyt pionowy na pudełko do konwersji CMMG oraz dwa magazynki do karabinka TOZ 17. Uchwyt mocowany na dwa magnesy D20 oraz śruby M4. Wydruk: dysza 0,2, temp. 210, standardowe PLA.
I am very new to 3D modelling software's like Fusion360 so this is probably not going to be very good, but you might like it so give it a rating :) Note: Hopefully the dimensions are correct, usb charging and power switch should work..…
