Counting matching models…
'Making of' video: Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the steamroller and the egg was each designed to be print-in-place without any need for support structures. The…
This is a modified version of Official_Dino55's Glamrock Freddy Head model. I added a hinge for the jaw and widened the neck hole to make the model wearable. The hinges only require two skateboard bearings. Rubber bands can be added to…
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files Update 25.05.2023 -adding hinge holes to the Head file
Created a shamrock for some St. Patrick's Day decorations. Simple model made in Tinkercad with slight editing. Resize and print to your desired depth. I made the Z axis about 0.5 inch so it could stand up on its own. No supports needed if…
Print with supports on, since quite a bit will be floating 20 mm off your plate. Or flip the shamrock to be on the plate and most printers can probably handle it without supports. I printed with 10% infill… pretty much anything should…
A glamrock freddy figure bc Y E S
Link to connectors https://www.printables.com/pl/model/488665-joints-for-fnaf-figures/files Update 11.06.2023 -Addition of corrected files with joints assembly
This cosplay head is from the game "FNAF SB"
Swirly shamrock to stand on a table, mantle, or shelf for St. Patrick's Day. Prints face down and should be scalable to whatever size you desire to match your decor. The “Flat” version doesn't flare out at the bottom if you want to hang…
Now you can print the star of the show! This is a detailed, fan-art figurine of Glamrock Freddy , the leader of the band from FNAF: Security Breach . Unlike the others, Freddy is here to help! This model captures his friendly but imposing…
Print in place articulated flexi shamrock to play with or give as gifts for St. Patrick's Day. There's also a version that can be worn as a flexi shamrock necklace to add to your celebratory St Paddy's Day garb. Prints in place with no…
Flexi Articulating 4 Leaf Clover or Shamrock Keychain for St. Patrick's Day I wasn't a huge fan of the other flexi/articulating clover keychains I found on here, so I decided I would try to make my own. This is one of my first experiments…
Just for fun, some print-in-place shamrock garland to help get your home or office in the St. Patrick's Day spirit. Prints in place without supports. Printer should be able to print with 0.4mm tolerances for pieces to move freely right…
A tabletop shamrock i made for my office, while we were producing an irish themed game 🕹
With this glue roller it is easier to wet larger surfaces with glue, also it should be easy to clean the device after use (depends on the glue of course :-) There are two versions, each with two different widths (46mm & 60mm) To use the…
head is hollow resize needed depending on bed size
Insert a pause to put in the fishhook earring. It will depend on your layer heights, so you will need to experiment. The earring loop has a diameter of 4mm. I would iron the top layer, unlike me!
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Sure, here's a brief overview of the 1930 steamroller "The Old Smokey" in English: "The Old Smokey," built in 1930, is a historic steamroller…
This is the shamrock design as a croc charm!
Among Us + Rock = ImROCKter. No Supports needed.
Easy to print, no supports ✅ 4mm hole for keychain 🗝 For the best results, use matte filament 🔥 (or better yet, two-tone matte filament like mine). If you look closely at the clover leaf, you'll notice that the layer lines are not…
Happy St. Patrick's Day!
Solid shamrock earrings for St. Patrick's Day, measures approximately 36mm x34mm. Grab your DIY jewelry kit and make some holiday earrings!
A keychain shamrock. There's also a model without the hole, so it can be used as a ornament.
Small shamrock book mark, use pause at layer to add the white border. Ender 3 Pro 0.12 layer ironing
Drum Key This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gein53MpBsu Category: 3D Printing
🍀 Happy St. Patrick's Day! 🍀 These adorable, happy shamrocks can adorn your keys, as a keychain, or hang from your ears, as a pair of earrings! Are you interested in selling your prints of my designs? Join my Printables Club , and start…
Add supports 15% infill print in place
Spruce up your St. Patrick's Day table with this festive swirly shamrock napkin holder. Holds napkins or anything else you feel like placing within it. Sides A & B press fit together for me when printed on the Bambu X1-Carbon, but feel…
Mark your balls with some luck. 4 leaf clover shamrock style. Use a sharpie or similar. Ultra Fine point tip for the stem.
Designed with 1mm tolerances. I printed in PLA with either forest matte green or silk gold. Approximately 3.5" overall and ¼" thick.
This shamrock / clover stencil is fun for St. Patrick's day crafts or whatever else you can think to use it for. Use this 6"x6" (152mm x 152mm) stencil for your making pleasure. Enjoy!
4 Leaf Clover Coin (Shamrock) created from the http://www.fontspace.com/fonts-n-things/clover-things font which authorizes personal use. Tinkercad file can be edited at https://tinkercad.com/things/fuayB1Vt4aY Experiment creating 3D…
☘ Knitted 4 Leaf Clover Shamrock Keychain ☘ Join my Patreon for a commercial license and more models! https://www.patreon.com/Smoggy3D
These are simple shamrock-shaped glasses to show your St Patrick's Day Spirit!
Halloween 3 Season of The Witch Skull Mask With Silver Shamrock Tag
Threads arent really refined, effectively a pressure fit. Haven't impact tested it but PLA+ should be suitable
Cute St. Patrick's Day T-Rex holding a shamrock. Print with PLA, no supports needed.
I am using this in a project to add Euclid and a hard Z end-stop to my Creality CR-6. Dimensions are accurate based on published drawings from the manufacturer. At this point, I think only the frame, stepper motors and main-board are…
Introducing the perfect seasonal companion for Flexi Rex - a delightful 3D model of a Shamrock! Designed to complement Flexi Rex's playful nature, this charming Shamrock adds a touch of luck and whimsy to your display. Let your…
Print in place chainmail fabric prints with no supports, no brim, and multiple sizes to choose from! There are 15 different sizes from 2 x 2, up to 12 x 12, and various in between! Print with standard 0.2mm layer height and… 🍀 Happy St.…
Don't feel like making a trip to the dollar store? Print your St. Patty's Day bling at home instead! Why spend a couple of bucks on a lucky shamrock necklace when you can make one at home in just 8-10 hours. This is the perfect accessory…
If you like it, please give me a like.
Replacement vaporizer head for NE-C28P, 3D design thanks to Mervin
It’s time to eat! This is a detailed, fan-art figurine of Glamrock Chica , the energetic guitarist and pizza enthusiast from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project for any…
Make way for the winner! This is a detailed, fan-art figurine of Roxanne Wolf (Roxy), the fierce and competitive wolf animatronic from FNAF: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
Omron-like encoder holder and 8.5x gears for FFBEAST force feedback steering wheel. Do not forget to split gears at slicer for printing correctly.
The STEP file contains three sperate objects which are separated by a small (0.2mm) gap. When printed separately they nest together for me with just enough friction to not slide out. I printed the inner and outer in a forest-green PLA and…
Lense Hood for Tamron A005 70-300mm (62 mm). Hood may be mounted in normal position for use, or in reverse position for storage. Has detents which click on the small bumps in the lense's hood mounting tracks. I no longer have an original…
This is a lens hood for a Tamron A17 (ref. DA17), 70-300mm lens with Macro mode. I bought a camera that came with this lens, and didn’t come with the hood, so I designed one in Fusion 360. I designed it from scratch, as I didn’t find any…
Shamrock Charm for Necklace or pinned to outfit. 2.5 inches in Diameter Original model at thangs.com: https://social.thangs.com/m/778785 Category: Other
Print per the original design, the eyes STL will need to be printed with supports.
made for the wife's baking business. She wanted a larger stem than what she could buy.
Shamrock display for St. Patrick's Day.
This is a set of two printable Ramrods, one for the Talon Claw and one for the Caliburn. These are printed flat to improve durability compared to vertically printed Caliburn/Talon Claw Ramrods. When installing, have the side of the ramrod…
Designed this good luck pig as a present for my family and some friends just in time for new year's eve. I printed this in grey PLA and painted it with acrylic paint. I made a 9mm hole for some gift ribbon and labels with PrusaSlicer. The…
🍺⚽ 🇮🇪 Celebrating St. Patrick's Day 🍻🍀💚🧡 Print this decoration and hang it on a door or wall This disc has a Celtic knot design of a 4 leaf clover. It comes with hoops so you can tie a string, connect it to the small 3 leaf shamrock, and…
Shamrock cookie cutter for St Patrick's day
I used in combination with: https://www.printables.com/model/981504-hoverboard-ffbeast-openffboard-ffb-sim-wheel-encod/files
Halloween 3 Season Of The Witch Pumpkin Mask With Silver Shamrock Tag
created after losing the original
3 piece Shamrock earrings for St. Patrick's Day. Printed with .6 nozzle, but a .4 would be better for detail. Buy a jewelry making kit from somewhere that has the ring links, or make your own!
The end stop from the Metal-Kit for the Y-Axis does not fit for Omron-Switches and those from the printable parts does not fit for both, so I created this one. I turned the switch from horizontal to vertical to get triggered properly by…
The 24mm(.9 inch) shamrock earring\charm size can be printed in around 7-11 min depending on your speed settings! Can be resized to any size within the slicer, no 3d modeling or parametrics required! No supports needed, but 5mm brim is…
MODEL DETAILS A St Patrick's day themed model with some hidden details! There are some challenging overhangs and detailed parts, but it is designed to be printed without any support material. If you liked this model, why not try out our…
UPDATE: I uploaded the wrong file and it didn't work for vase mode. I've now uploaded the right one :) Sorry! ----- Messing around on Make My Vase, I decided to make something for the upcoming St. Patrick's Day – a vase with a secret!…
Infil 100%, 0.15mm PETG, supports - yes.
Clover Keychain This keychain is perfect for personal use or for a gift to others. Dimensions: 61.84mm (H) × 58.55mm (W) × 12mm (D) Note: These dimensions are from a top down perspective Why You'll Love It: ✅Quick & Efficient Print – Uses…
Design found in 3D Warehouse Category: Buildings & Structures
This root hook helps you at the repotting process. You can untangle gently roots with it, or remove old soil. With this improved version you also can work in new soil easily, by using the pointy end. This is necessary to make sure your…
Celtic Shamrock Coin 2 inches in diameter Category: Other
Glamrock freddy z FNAF Security breach
Now you can print your very own Glamrock Freddy! This is a detailed, fan-art figurine of the star animatronic from Five Nights at Freddy's: Security Breach . This model is provided as a single-color STL, designed to be a perfect project…
A figure holder is recommended if the figure is to stand
Englisch: These are sticks with the clover leaf symbol that can be used in a flower pot or as food sticks. Deutsch: Das sind Sticks mit dem Kleeblattsymbol die man in einem Blumentopf oder auch als Essensticks verwenden kann.
Happy St Patrick's Day! Update 2024-02-23 I added more preset hinge clearances for this print-in-place design. They range from 0.1 to 0.6 and should provide plenty of options. If you wish to scale things up in your slicer, you'll want to…
A very functional pen-holder in time for St. Patrick's day. Print it in 3 perimeters or higher. happy printing! :) Lá Fhéile Pádraig sona duit.
printet this in two colours.. temp. change green and pink.. original design had only 3 leafs (Irish thing). i needed 4 leafs for good luck.. please press Like, before you print this.. Need money for filament, so if you can & will donate a…
A tabletop camera roller for getting smooth, panning shots at low angles. Adjustable steering angle from -45 to + 45 degrees. I haven't tested it to max capacity, but it's handled my Sony FX3 with a pretty chunky lens (Sony FE PZ 28-135)…
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
Celtic Knot Shamrock coaster Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 200 Infill: 15 Filament: Any PLA, PETG Any Category: Office
This is a bracket to mount an Omron quadrature encoder to a Grizzly G0602 lathe spindle. It's part of the Clough42 Electronic Leadscrew project. The mount is held to the lathe with two M3 screws, and the encoder is attached to the mount…
Adapter for old Tamron Adaptall 2 lenses to be mounted in new canon EOS DSLR. Tested with two lenses. The adapter is keeping the aperture lever pressed, so you have to dial and keep the aperture on the aperture ring. No electronics.…
This remix contains all 8 variants of the boltbase (locked, unlocked, nut, no nut, left and right) with ramrod as .stl and .step. It can be printed without supports. I printed it for my Cynthia build and I still put the O-ring that…
I took the original file by smrogers91 found at https://www.thingiverse.com/thing:3180130 and made the mini box a little deeper to fit a 30mm base with 4mm extra for 2mm(x2) EVA foam padding. If you have any issues, please let me know and…
This is a quick and dirty router table insert for the Bosch trim router with matching templates. The router is quite powerful, so it works relatively well as a table mounted router even when cutting hard wood, albeit taking shallow…
This is a Scout class ROV designed for printing on a 300mm x 300mm bed printer, Such as a Lulzbot TAZ or Similar. It is Very much a work in progress. It is designed to use 4 Blue Robotics Thrusters, the Electronics package from the Open…
No supports needed print with shamrock down
Print base and clover. Pieces snap together with my FDM printer. Glue optional. If they are too tight, try printing the shamrock 2% smaller or lower flow. Horizontal expansion settings may also be useful in getting the fight ‘just right’.…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is an LED / neon sign shell designed as minimalist Shamrock. The LEDs I used are (affiliate link) Lamomo Green Neon Lights . For…
Clover Shamrock -Version 1 (has holes on back for button magnets). Clover Shamrock -Version 2 -Fidget Spinner Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
Based on the FlexiRex improved, this variant is getting ready for St. Patrick’s Day. In addition to the normal Rex the model also has a Jaunty Hat, some terrible facial hair and is holding a Shamrock. In the pre-sliced models fuzzy-skin…
Application Suitable for M5 internal thread ramrods (e.g. StilCrin and similar). Use with 12 gauge felt cleaning patches (e.g. from "ЧистоGUN”). Normally passes through full choke (1mm) Making print (tested with PLA, 0.2mm layer, 0.3mm…
Eight shamrocks featuring some traditional Irish phrases, and some common day sayings as well. The lettering is raised 1 mm on the design to allow for a simple color change. The shamrock's step file is included so you can personalize the…
