Counting matching models…
Arrma Kraton 6s Rear Mudflaps These mudflaps fit beautifully on the rear control arms of the Kraton 6s with the existing screw holes (you need to put a little longer screw into the hole which connects the stabilizer rods ) I printed them…
Logo Renault for mudflap (Megane) back side. ABS
The STL is only for the right side. You need to mirror it in X direction to get the left side too. You only need two M3x8mm screws. printed in ASA weight is ~3,2g
Initial release. The small hole should align with the factory screw. The additional 3 holes are for retainers. I included photos of the two types that I sized it for out of a retainer kit I had. Be sure you measure exactly what size you…
These mounts clip right onto the crossbar on the inside of the body of the TRX-4M Defender. I've included a file for the mudflaps as well but I just bought a $1 black binder and cut that to size. You could print out the mudflap and use…
Small Mudflaps for those are only driving on normal Roads
The mudflap on my kingsong 16X tore off with an offroad session so obviously I wanted to replace it. The original one is big and not that great to look at so I went on and made a new design. I started with making the blank bumper which is…
I've added diamond plating pattern on the mudflap, which looks better in my opinion and coincidentally makes it slightly stronger since it is thicker. Otherwise, everything is the same as on the original file. Print Settings Printer…
KTM 890 Adventure has annoying issue. The hole in the rear mud flap does not make sense and just lets mud spray through and cover the rear light. This reduces safety even after light off road riding. it definitely needs to be covered. so,…
I recommend PETG and 2x M6x20 screw and nut
Nice clean bolt on mudflap brackets, mudflaps and mudflap retainers. All screws, no gluing. Although you can use your imagination or what you have lying around and still make these great. I've included STEP versions of the files if you…
These mudflaps prevent excessive dirt from getting to the wishbones and shock absorbers. They fit all Carson Virus models and similar or identical chassis. I printed them in TPU, so they are very resistant to damage.
This was the first attempt to replace my broken front mudflap. This is not easy to print and needs a lot of support. I was able to print it in TPU and it is still working.
PETG printed mudflaps l+r for Ford Mustang Gen6. You can attach the logo pony in any color of your choice. My model was a mid 2019 EU GT.
Rear mud flaps for FMS FJ40, their latest big-scale (more 1/7th than the advertised 1/10th) ... TPU of course. Sildes onto the rear body rod. 23-09 : added new mudflaps, 2 short, 2 long, each either plain or with "Land Cruiser" text. All…
Mudflaps compatible with the Losi Baja Rey and several other Losi short course trucks. Print in TPU for best results. Fitment only verified with the Losi Baja Rey 1.0, but should also work on the Baja Rey 2.0, 22SCT, Tenacity, TEN-SCTE,…
Mudguard for Volkswagen Sharan, Galaxy, Alhambra 7M A simple mudguard designed for the Volkswagen Sharan 7M , helping protect the wheel arch area from mud, road debris, and splashes. Custom-shaped to match the contours of the Sharan 7M,…
designed some mudflaps for the Tekno SCT410 2.0 for an more scale look. you need: 6x m3x10mm screws 6x m3 nylock nuts 6x washer (optional) 2x mudflap mounts (preferred in petg or nylon) 2x mudflaps (preferred in tpu or cut a 2mm rubber…
Print in TPU. Glue to the rear lip of the rear inner fenders.
This is a redesign (not a remix) of https://www.printables.com/model/146449-bicycle-splash-guard I think the flap hooks are better this way. It can be riveted for a permanent installation. STLs for Bluemels 42 and 65 are provided. The…
These were made for a Saab 9-3 TTiD 2011 to keep the freshly painted fenders from getting ruined right away. I don't know exactly which model years they fit, but they fit at least these latest manufactured model years. These aren't…
S10 Mudflap for first gen s10s. Printed on an Artillery Sidewinder X2 but would fit better on a larger machine. Printed in Polymaker TPU95, but can be printed out of any TPU/TPE.
This first test failed a the hinge point after a couple weeks of riding. I will soon have an updated version that has more reinforcement and a lighter overall design to avoid this issue. I printed the hinged/load bearing parts at 90%…
TPU only Must be printed in flexible material. How to mount: Screw on top of your brackets on you double drop longboard. Washers are advised to keep the mudflaps where they need to be. Stuff the lower part unter your deck. I've had good…
3d printable mud flap, print this to use with the original model
The mud flap on KaThy-M motorbikes has a big hole in it through which mud and debris gets thrown onto the stop light. I made this hole plug to stop it! You will also need some screws, plastic/wood thread with flat cap 3.5mm diameter, one…
🚲 Bavette flexible pour garde-boue – Protégez vos trajets, en ville comme sous la pluie 🌧 Tagline : « Parce que vos chaussures n’aiment pas l’eau boueuse 👟💦 » 🇫🇷 Description : Voici la petite pièce qui fait toute la différence : une…
Friend had an antique toy truck that was missing a mudflap. Quick design for a replacement.
Fits VO 26" Smooth Fenders, 60mm.
Reproduced a vintage Hunt Wilde fat tire bicycle mudflap. Printed in TPU with 0.4 nozzle and 0.2 layers. The originals were mostly single color and this design screams for 2 color printing. The prusa slicer has an option to minimize…
Better in TPU or similar. Glued or screwed in. There's a plain and a Bronco emblem version (using https://www.thingiver
Traced a scan of a vintage mudflap to recreate it. Print in TPU. Included optional stars for mounting reflectors inside of Including a variant with a wider top for use with wider tires.
POLSKI Testowa wersja chlapacza do błotników rowerowych. Element służy do przedłużenia błotnika i ma ograniczać rozpryski wody oraz błota. Wymiary zewnętrzne modelu: • szerokość: około 50,5 mm, • długość: około 61 mm, • wysokość: około…
These were made for a Saab 9-3 TTiD 2011 to keep the freshly painted fenders from getting ruined right away. I don't know exactly which model years they fit, but they fit at least these latest manufactured model years. These aren't…
3D scan of a 1991 Nissan Skyline R32 GTR Coupe Mudflap. Mirror for other side. Recommend printing in SLS or MJF Nylon. ABS/ASA filament will work OK.
