108 models
After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Another iteration on already stellar designs, just some small tweaks to embed the 6x2mm round magnets into the print with a pause at layer 17 to place the magnets when printing.
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant
I've done it, everyone! I've reinvented the wheel! But seriously, this is just a simple model with a straight-forward design that seems to work well for my purposes, even if it's something I could have downloaded from dozens of…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
Remixed version of the original Prusa RC3 design. The modifications were made trying to adjust to local, easily sourced materials and tools in Mexico. Some of the main modifications include: Flexible head rest for adaptive comfort. Round…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Da mir die Schraube, welche die Feder in der Mittelstange hält, nicht gefiel und im laufe der Jahre stark rostete, habe ich mir einen Clip modelliert. Er kann mit ein wenig Druck, inkl. der Feder, in die Stange eingesetzt werden und…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to hang a white led strip across a back wall in my hallway so that I can light up my newly created wall of miniatures but didn't find anything that quite fit what I was looking for. These allow you to screw them to the wall…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This is a support to mount the 15x30mm motherboard of the IMX258 camera module on the extruder of the Prusa MK3S+. Please note that there are many dimensions of the IMX258 motherboard on the market. This support is only compatible with…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
This is a support to mount the IMX258 10x85mm webcam to the Original Prusa Enclosure (OPE). Please note that there are other sizes of this camera on the market, but this model is only compatible with 10x85mm ones. For example, I suggest…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
modification pour mettre une bague de roulement en laiton
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
This adds 3x holes for 6mmx2mm round magnets into dancan13f's Prusa Core One Dust Protector parts. Update 6/16/25 Added the rear dust cover and made press and embed --Press: Tight fitting holes to press magnets into after printing…
3D Model of the Arducam Raspberry Pi Noir Camera Module v2.3 8MP IMX219 linked below. LINK: https://a.co/d/a3vHtyj
Use this to convert a 80mm axial fan to a blower fan, you need to break the blades and sand the original fan to convert.
Summary I wanted to use the amazing support from https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m to be able simply to use the Raspberry Pi with an Arducam IMX219 camera module camera as…
A decorated designed tiles to mount on the wall. Can be mounted in 2x2, 3x3 or 4x4 array. Each tile is 22cm by 22cm (8.6in) Print is optimized for minimal filament consumption while keeping solid structure Inspired by the design of…
It's a magnet I designed for Teacher Appreciation. It uses different depths to achieve the colors, instead of multi color printing. I manually add pauses and change the filament. Needs 2 12mmx2mm (actual size is 12mmx1.8ish) First Layer…
Remix of Radiomaster RX-RP1 Receiver V7 Case Mount 20mmx20mm
I printed out this Mount for my Asus Monitor and im happy with it. it works. Metal stand should hold minimum 8 kg screen. Print instructions I printed out with support.
Flet selica gel container to hold around 50-100g of the selica gel. Can be used for warderob shelfs to keep clothes fresh. Or in the car to keep windows dry when cold. Or where ever it needed. Flet form factor allows more selica beads…
I have adapted the model so that you can use M3 inserts for the screw connection. I used 6x20x2mm magnets and made corre
O-ring for Shimano bleeding funnel stick. Dimensions: 8.5mm o-ring with 2mm height and 5mm interna diameter. Print tips: print with TPU 95A no support needed no brim needed
I ordered these track lights from Aliexpress as a kit, sadly they didn't come with endcaps so I designed some up. One is just for closing off the end, the other has a hole for wiring. This is the kit I ordered:…
O-ring for Shimano bleeding funnel stick. Dimensions: 7.5mm o-ring with 2mm height and 4mm interna diameter. Print tips: print with TPU 95A no support needed no brim needed
to store mini stuff under the desk and free up some space on it
A mountig enclosure for the Arducam IMX219 (SKU:B0196). It has a clamping feature, that it can be used as a webcam. The middle part of the arm now has two wings to avoid tilting. (Bein(2).stl) To assemble it, you will need 1 M3x15mm Screw…
Since the included ear pads of the MMX200 unfortunately tend to break quite often, I designed an adapter to mount the DT770PRO ear pads onto the MMX200. The adapter consists of two parts: Part 1 attaches to the MMX200. Part 2 holds the…
Cable chain innerDiameter 25mmx25mm
this is a Traffic Cone 20mmX20mmX30mm
The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did slice then, but one side was not able to put the brim down correctly. I squeezed everything tighter and was able to get…
I could not find the 14mm version of this fan that was cheaper than the 25mm version. Made a quick remix to fit the 25mm version to save a few bucks :) Thank you to Zcubed for the actual hard work in making this!
Very Simple Hygrometer / Temp Gauge Mounting Frame. For the 45mmx25mm Gauges commonly Found on eBay/Amazon etc... Required any M3 (8mm +)Screw you have Spare (Nuts also if required) Printed in PLA Any infill (it is all Wall anyway)
Frei abgeleitet von Escher Heesch Parketmustern haben sich meine Töchter und Frau eine effiziente Guetzli-Ausstechform von mit gewünscht. Gedruckt hab ich es auf einem FlashForge Guider IIs mit PLA+ von GST3D.
This is a remix front cover for the picam corner cameras for Arducam IMX219. As of this submission, there is a corner cam and a mirror corner cam for the Voron 2.4. The front cover does not fit the Arducam 8MP IMX219 variant so this…
Wanted to stick some small metal tools up on my storage wall and had some 10x6x2mm rectangle magnets left over from another project. A small drop of glue and the magnet stays in nicely. Should work with PLA/PETG/ABS nicely. You should not…
Source: https://cad.onshape.com/documents/8e32626565cbbeef5e4cd8d3/w/b09365e8f3eeb6319f5a1b46/e/11d4dc9550a5c0cac525a516?renderMode=0&uiState=64aaf63abe953312f726ec55
Hallo zusammen, anbei eine Skadis kompatible Platte mit den Außenmaßen 200mmx200mm. Durch die kompakte Größe müsste sie auf die meisten Drucker passen ;) Eine Version hat Schraubenlöcher zur Befestigung an denen der Schraubenkopf bündig…
I bought a non-autofocus USB Arducam (1) for the use with OctoPrint and the 'Articulating Raspberry Pi Camera Mount' (2). My camera has the back mounted usb cable and the lens was slightly lower than other designs I found online (3). So I…
Digitale Lehrerin's lovely dice book, converted to a solid model for easy editing in Fusion 360 or other parametric CAD software. Magnet holes adjusted to fit standard gridfinity magnets.
easy to print , no supports, printed in black elegoo rapid pla window is in petg clear ironing mode on for clarity.
A basic mounting setup for developing vision + AI apps for your BeagleY-AI. The BeagleY-AI is a single board computer (similar to Raspberry Pi) but with 4 TOPS of AI performance. This case holds the BeagleY-AI in place with easy access to…
made it because I am not willing to spend extra dollars on carbon fiber plates, print at 100% infill. The holder and the chonky boy can be printed normally, tested with ABS, they do sand insanely well.
Needed to place my Asus monitor in a vertical position and because it does not have a VESA mount I created one that fits on the leg of the monitor. Tight fit and needs some force to push it in place. I printed this in PLA, 0.2mm layer…
This is a box for a LM2596 converter whose board measures 48mm X 23mm. A quick way to tell if this one will work for you is if by the output positive there are 4 pads arranged in a square. I made this after I realized that not all…
This is my very first remix! I used the Clay2F Skadis tile as the base. The tile size fits easily within a standard 256mm x 256mm build plate, though you might need to make some small placement adjustments to get it lined up perfectly…
Use standard Skateboard bearings, preferrably brand new, clean. Needs to be JB or Epoxy welded to a thick steel plate for accuracy with Dial Indicators. I wired the Rod in place so the stand could be as small as possible. You may not need…
This isn't a remix, though I did see the same idea from multiple other users on Printables (whose names that I don't recall) and decided to make my own since the ones I saw were flat-topped instead of tapered or rounded. Now that I've…
assembly instructions for the modular system on the creator's page https://www.thingiverse.com/thing:1079807 you'll need one m3x25mm bolt and nut (or 20mm without nut) to secure the camera mount and the cover two m5 Tnuts and bolts to…
Remix of painting handles with holes designed for 6.5 mm magnets, rather than 5mm.
I've designed this to use two M2 heat set inserts for the camera PCB and used screws from a laptop screw kit. Two M3 heat set inserts are used like in the original version for the aukey cam. Designed for module WN-L2011.K200L FF, but…
Box with divisors 275cm x 230cm x 70cm 2 files. Merry Xmas to all!
I liked the original model, but it did not fit the GPS I use. The model is made from scratch, but I got dimensions from the original author and modified them a little.
This is a wall stand for Tenda Nova MX21 Pro AXE5700 (Wifi 6E). .3MF file stands for i3 MK4S
Check out the .3mf file for my preferred settings, especially for supports. Best to be printed in a material that doesn't creep, ABS is a good option. The supports can be removed by pushing an exacto knife in from the end on each side of…
This is a simple wall mount for the SmartDrive MX2+ charger. The print contains two main parts: the mount itself, and a plug holder that slides into a T-slot on the side of the mount. Installation Instructions: Print the parts using your…
EasySMX20 phone holder with clamp. Big, rugged, will not break :P I haven't found any holders for easysmx20 so i made my own. But i made it too strong:P V1 is adjustable, but heavy. V2 is more slim and without adjustable angle. I printed…
First layer calibration This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ky4bL2wQERE Print instructions Category: 3D Printing Summary First layer calibration This thing was made with Tinkercad. Edit it…
Should be just to drop in and twist, then add zip-ties hold the cables down. Updated the stl without the unnecessary tabs, since zip-ties will center the cables anyway. And adjusted some other measurements while i was at it. Category: 3D…
Looking for a horizontal, stable, adjustable stand for the MX200-B microscope camera? Look no further. The c_fixture file requires supports to print properly. The print shown is PLA extruded with a 0.4 nozzle.
Doppelbett 1:100
Added two holes to the original parts to fit magnets (round 10mm diameter, 2mm thick)
This camera enclosure is for a Sony IMX214 camera sensor board with a USB connector. I purchased the camera from a retail store that deals in Amazon returns and merchandiser liquidations. This can be purchased from ELPCCTV here - though…
I This is for the following product https://www.aliexpress.com/item/1005004407649001.html?spm=a2g0o.order_list.0.0.8ec01802ioh7Xm Mounts to any 20x20 extrusion via the modular case parts. The case is held together via 4 M2 self tapping…
Hardware used: Half-round M2x8mm screws - 4x (Utilized at the top of the fan) Half-round M2x16mm screws - 4x (Employed at the bottom of the fan) M2 nuts - 4x (optional, not strictly necessary) KCD1-1 (Switch) DC-025M (Power Input) DC wall…
No extra tips here. This is a remix of a remix. Follow the rabbit back a few makes for better info from better makers. Last photo is the original remix by huberjer.
Replacement bracket for newer SmartDrive MX2+. Materials I've printed it with: PLA - brittle and more prone to breaking, will melt in a hot car, doesn't hold up to long term sun exposure. PETG - better results due to more flex, still…
Thank you Micro SD Mantis4g63. Modified for 2 25X25mm fans and added a tray to hold the Micro SD to Micro SD Extension. These smaller fans allowed me to mount them inside the enclosure and the Micro SD to Micro SD Extension tray is just…
Doppelbett 1:100
This design was made for my colleagues in our equipment loan department when their new mini dual v-mount chargers (Hawk-Woods VL-MX2) couldn't accept all their v-mount batteries as the mounting positions were too close together by around…
This is an adapter to run the Forester mini chainsaw on Parkside X20V team battery
I am new at 3d printing and I needed an organizer for my bathroom drawer, so I made this. It's pretty specific and I don't have enough knowledge to make it parametric, feel free to make a better remix of this. Print Settings Printer…
tis about it sorry spacing is weird i didn't do the math.
A bracket to hold the IMX291 camera module that takes the place of (and reuses the same screws) as the IR LED board that comes in the below enclosure. Holds the end of the 6mm lens about 1mm off the front glass. Utilizes some M2 threaded…
A Case top for the Raspberry Pi 4 to include a 20mm x 20mm x 10mm fan Print Settings Printer: Geeetech aluminium i3 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 15% Category: Electronics
PLEASE NOTE: I have shortened this model from the one pictured so that it fits on most printers, so it's 15cm instead of 17cm tall. This compartment does add a few grams but I felt that I shouldn't make it any thinner, I can do this upon…
I know, I'm late to the party but a friend got me a fabrikator mini from his basement - new. Now I'm stuck between the world of newer cameras and old mouns - this is my first design of a cam holder as the current ones do not fit my picam…
Work in progress! Since the original kept breaking and glue wasn't a solution, I tried to 3D print a replacement part. It works, but it still needs an M3 screw with a nut for greater durability; an older version without one broke after a…
200MMX200MM HARLEY DAVIDSON TRAY
Isolation_bushing_M10_13mmx2.5mm
Remix of Thingiverse case: https://www.thingiverse.com/thing:4901601 I added a notch for the wires.
my version of the gridfinity magnet base, this is based on the 4x system with borders. magnets are 5mm x 2mm, there is other ones with no border and partial borders on my profile.
Spannrahmen für Selbstgemalte Bilder. Die Maße der Bilder sollten 25,4mm nicht überschreiten. Die Dicke des Bildes kann bis zu 3,7mm sein. Beim Montieren muss man aufpassen, dass die Führungen gerade zueinander sind, da ansonsten die…
Hier stelle ich ein Filtergehäuse für einen Aktivkohlefilter für den Elegoo Centauri Carbon zur Verfügung. Der Aktivkohlefilter hat die Maße: 115mm x 115mm x 20mm. Das Gehäuse habe ich 1mm größer konstruiert. Der Link für den Filter ist…
simple rosette, with a 25.1mm x 25.1mm hole for a 25mm x 25mm profile. Butterfly/book-like arrangement, with a hook. Very simple and quick to print
Designed to fit a Pelican 1120 carry case to organize: Two Dexcom G7 sensors Two Cartridges, syringes, and infusion sets One vial of insulin To use, remove all of the foam with the exception of the thin bottom foam insert. This foam will…
This is a protective cover for the Hercules DJ Console RMX2 if you want to put it in a backpack. It is divided into 4 parts due to my printer size. The 4 parts can be fit together (dovetails) with hard plastic adhesive. This should make…
a printable plate to convert to direct-drive. my printer is a slightly modified e3 pro v1. this plate has run 180-ish hours so far, and still has no discernible flex. mine is only printed from sunlu pla+. petg is of course preferred, but…
I only had 6mm x 2mm magnets so I slightly tweaked the fit for the cover sensor magnet
I didn't like not being able to tighten my 20mm m2 bolts to lock in a specific position for my camera. A couple of small notches allowed me to fix that by giving enough room for a nut. Category: 3D Printer Accessories
Support de caméra T-Rex Foxeer qui remplace les entretoises en montage de 20mm. Attention Ce n'est pas du standard, c'est +2mm de hauteur. Je l'ai réalisé pour pouvoir monter une caméra T-Rex Foxeer sur une Frame Lightswitch Pro Light 2.
Wheel I created as the original H-King MX2 wheels are no longer made. Print with 15% infill for the TPU wheels, whatever you choose for the rims. 50 mm width 11 mm hub spacing 3 mm diameter hole Created in Fusion.
HERE FOR A GOOD TIME 200mmx200mm TRAY
200MMX200MM ELEC WORKERS BAR AN SHIELD TRAY
200MMX200MM I CAME FOR THE CASH TRAY
Print your own replacement part instead of throwing away the headlamp! This replaces the base: the piece connecting the headlamp to the strap. It is a simpler version of it: with a rectangular base. But fully functional, it holds the…
200MMX200MM TRAY FL STATE BAR AN SHIELD
200MMX200MM BROTHERHOOD WE TRUST TRAY
