Counting matching models…
Shackles and chains. Two sizes for Halloween costume; prisoner, thief, zombie, slave or similar. The handcuffs have hinges and snap closed with click. Print one closure clip for each shackle, and two closure clips for each Leg iron.…
A scale model of the tabernacle of Moses according to Exodus 25. For visual representation, scale is not exact. Print instructions Print 100%. Make sure the Slicers can distinguish the 7 Candle sticks.
Shackles and chains for children's wrists and ankles. Two sizes for Halloween costume; prisoner, thief, zombie, slave or similar. The handcuffs have hinges and snap closed with click. Print one closure clip for each shackle.…
Come join this collaborative project to create the Tabernacle of Moses (Mishkan) as described in Exodus, with its courtyard and objects! Here is the link for the group I just created, and I am hoping others will want to join in to make…
I ripped this model from the game and modified it to make it printable.
Introducing Trinacle—a 3D printed sink organizer with three cups seamlessly fused for modern organization. Its stylish design not only keeps toothbrushes in order but also serves as a practical solution for drying kitchen utensils.…
This is complete set of models for the Mishkan, or Tabernacle of Moses. It includes dioramas of the complete courtyard (without fabric elements), the courtyard objects, the mishkan, the ark, and the other mishkan objects, as well as some…
Print solid with a strong material. It may work with PLA but I haven't tried it and it depends on how hard your filter has been tightened.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Garganacl , Tabletop DnD miniature 50 mm Large base which can be used for DnD and other Tabletops.
odmerka na soľ pre konvičku Rhino Horn
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Nacli , Tabletop DnD miniature 20 mm small base which can be used for DnD and other Tabletops.
The Tenacious Tenant: Unpacking the Relationship Between Barnacles and Shells Free Life Cycle of the Barnacle Game. https://g.co/gemini/share/3a23a4536ce2 A common sight in marine environments, the barnacle encrusted on a shell represents…
Come join this collaborative project to create the Tabernacle of Moses (Mishkan) as described in Exodus, with its courtyard and objects! Here is the link for the group I just created, and I am hoping others will want to join in to make…
Crests attached to the left arm of Savanaclaw school uniforms. Flat pin back (available online or at your local craft store) is required to attach it to a sleeve. Ribbon is not included. Print in any color/filament type and spray paint…
This is Dashboard binnacle For MGF /TF You have to drill holls for front screws. Model in 6 peaces can be printed on small desktop 3d printer , print it in abs/asa.
I optimised this for the Pinnacle metal pegboards from Bunnings. They are a tight fit, but just right as far as I thought. These are the specific settings (from @Donovan Baarda's parametric setup) Body Width - 6mm Pegboard Thickness -…
Here's my proxy model for the cloaked and manacled savvas Gloomhaven boss! This guy was fun to make, as I worked hard to develop a pose that would capture the unique threat that he poses when he's on the board. I really enjoyed making the…
Charms for Leona, Ruggie, and Jack Models are 65mm in height. scale them smaller for earrings or bracelet charms. Printed with photopolymer resin on an Elegoo Saturn.
It was a challenge when we bought the fancy new head unit with the ten inch screen to make it look as though it belonged, and even more so to make it easy to install. It looked exactly as it was, a big screen stuck in front of the…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Naclstack , Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
This is the Table of Showbread (Shewbread ) from the Tabernacle.
Just for fun ! No supports, and 3MF available Try it! IMPORTANT : Become a Patreon here : https://www.patreon.com/BODY3D You will also have access to a lot of designs =) All my Links : https://Beacons.ai/BODY3D
Introducing the GearSphere, an ingenious addition to the Pinnacle Gear print. Designed as a double-sized gear, this interlocking ball allows for the connection of two or more spheres. Twist one sphere, and the neighboring sphere rotates…
It is an abstract sculpture using simple shapes but resulting in an elegant design. It could be an artistic design, a trophy, an award, or a shelf ornament. This model was NOT created with any use of AI. It is designed to print without…
break the fin and glue the armor on
I'm not sure the best way to print this. I'm thinking to lay it down on it back and using supports. Let me know in the comments. Print in Gold PLA or black and paint it. Resize to your desire.
here is this 3D modelling learners poor attempt to create the monacle for the Alpha 17 ARC trooper. It consists of the monacle and the ear cap. Included are versions with attached cable/straps though I recommend using your own for a…
Hack job of https://www.thingiverse.com/thing:6658722 latch mechanism and https://www.printables.com/model/685785-filament-rack-for-400kg-rack-it-shelf-bunnings shelf for 16mm rods. Fits both Pinnacle/Montgomery shelves Category:…
Another model today that was in my list - Barnacle Bess. She's a low level medium creature from Ghosts of Salmarsh - while there are crabs there weren't any called out specifically as Barnacle Bess so I wanted to make one to fill that…
Ringbox Replica of Mermaidman and Barnacleboys Rings. Printed the box out of woodfill PLA, hinges and insert out of standard-PLA and the plaque from silk-PLA. Works best with a 10mm magnet for very satisfying closure. The insert holds the…
# Bionic Barnacle Github https://github.com/spuder/bionic-barnacle Bionic Barnacle is a fan for [the fan showdown on youtube](https://www.youtube.com/@MajorHardware). It is based from [this…
Replacement Feet for a Pinnacle 4 Tier Adjustable Shelf (G0S186) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.25 Filament: Generic PLA Black Notes: Lots for Top and Bottom layers and 3 Walls…
I designed this model for a teacher, for chemistry class. I'm not a teacher, so I hope I can describe it well enough... It helps to visualize the structure of sodium and chloride ions forming electrostatic bonds in a crystal structure.…
I have added the connectors for the pinnacle pegboards. These are modeled off the ‘scrivets’ that pinnacle supplies with their accessories. I have added seperate connectors that slot in as they can break if you move them around often and…
Print-tested at: Printer: Bambu Lab A1 Mini (FDM) Filament: eSun PLA+ Layer height: 0.08 mm (fine detail) Nozzle: 0.2 mm Supports: Minimal, auto-generated — works upright with small touchpoints only Z-height: 65 mm (true to scale)…
Hey all, This is a remix of AimeBuilder's universal pegboard peg. I tweaked the distances between the two tines/attachment points to be 20mm and changed the bottom attachment point to be slightly more square. The attachment points are now…
I designed the barnacle that lost the 2017 mob vote in Tinkercad. Separate printing for body, eyes, and tongue. Category: Video Games
This is a simple remix of the already remixed universal mount for callipers to add on the connectors for the pinnacle pegboard sold at bunnings in australia. should also fit other pegboards that are 25mm between hole centres (6mm holes).…
Blocky Iron Sights (combined in one piece) -- Barnacle for foam dart blasters with picatinny rail. I made these low profile, blocky style and clearly visible iron sights for my Barnacle. It's a bit of a loose fit at my Barnacle (but it's…
So you don't have to spend $70 on one
Front Grip + String Cover --- for Leedle's BARNACLE Stringer Blaster --- Since there is nearly no load on the handle, it can also be printed with few walls and infill. The files are already pre-oriented. It needs approx. 40g of filament.…
Mount prints with the flat part on the bed, cap with the hollow part up, and the outer case prints best standing up.
Mitsubishi Delica L400 Binnacle Gauge Adaptor Allows you to fit a standard 52mm gauge in the centre hole on the binnacle
This is an update on my original gauge adaptor, I've made it so it fits a little bit more snug, and shouldn't need any glue or even the gauge retention bracket. Mitsubishi Delica L400 Binnacle Gauge Adaptor allows you to fit a standard…
This model is designed to show how ionic compounds such as sodium chloride dissolve in water. The sodium (orange) ions, chlorine (green) ions, and water molecules are all to scale. The bulk crystal is face centered cubic. Separate ions…
An artist Spherical design - I love the simplistic organic lines in this design. There are two different versions, one with a twist. Designed to print without supports. Please "like" this file if you collect or download it. Category:…
Pinnacle, or finial for a mast that goes on a railroad signal. It is for 5 inch mast, but can of course be scaled to your liking. Category: Buildings & Structures
Remixed to fit the Pinnacle peg board board I had. Printed in PLA, 50% + Infill.
A low quality model of Naclstack from pokemon scarlet/violet (Watermark Included)
Mould blank for lost PLA investment casting for the mast step / tabernacle of my Hunter 19 (Pre Europa) sailboat. Print a slice of the top part at 100% to test fit. Print at 103% to allow for aluminium shrinkage. Supports and brim on the…
A simple low quality model of Garganicl from Pokemon Scarlet/Violet
This is an updated, more durable version of my Thingiverse model. If you want to thank me, https://ko-fi.com/maxpi After the parts are printed, they need to be connected together using two wire segments 12AWG 4mm2 D-2mm. Clamp a piece of…
Getting near the bottom of the trove now. This is a reproduction of a classic figure from the Masters of the Universe set #9102, "Battle Cat Attack" released by Pinnacle Products. (see…
This model is pushed onto the rectangular-ish valve of a GSI Pinnacle 4 Season stove to be able to keep the canister upside-down for liquid feed to the stove. Since this GSI stove has a generator tube, which goes through the flame, you…
Here is another reproduction of a classic figure from the Masters of the Universe set #9102, "Battle Cat Attack" released by Pinnacle Products. "Teela" (More information here: https://he-man.fandom.com/wiki/Teela ) Pinnacle Products was a…
holds m18 tools to pinnacle pegboard using the screw rivets
No supports needed for printing.
Barnacle Bay is a fun game, and it runs pretty fast.. but if you've got a lot of items, or use the advanced initiative tracker, or are running two characters, you can sometimes slow down remembering what your attack, defense, or speed…
The game Wander: The Cult of Barnacle Bay is an excellent game. Many features of Zombicide, Betrayal at the House on the Hill, and a Choose Your Own Adventure book. Like many, it has lots of little tokens that can be tough to track down…
This speedloader will help you with loading half darts into the Barnacle. With a bit of practice and sanding to fit your specific darts, this is a handy storage option for quick reloads! Works best with stiff half darts, as most stringers…
Here is another reproduction of a classic figure from the Masters of the Universe set #9102, "Battle Cat Attack" released by Pinnacle Products. (see…
Got these bad boys to sort my lego by building under a lego city table with them, they come in four sizes and they slot together well. Once I'm finished sorting and I have fully assembled I'll take a decent pic. Critical flaw is that the…
A unique 3D printable creation — this Barnacle Covered Anchor Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Risers suitable for the $3 Pinnacle 50mm Zinc Plated Barrel Bolts found at Bunnings Australia. These risers allow you to adapt the bolt lock to your needs. I know this is a really simple model but the holes are weirdly spaced and this…
Table salt crystallizes in the rock salt structure: face-centered cubic chloride ions with sodium ions in the octahedral holes. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in…
5 labeled crystal unit cell models - classic ionic salts and the three metal packing structures every materials science course covers. Every atom is a sphere in standard CPK colors with its element symbol plus proton and neutron counts…
A skull that has spent a long time under water: one temple is broken open, shallow cracks run from the hole, six barnacles have settled around the break and low patches of olive growth spread between them. It prints as one piece in four…
This is a signal pinnacle for 1 inch sized conduit. meant for 7.5 & 7.25 inch gauge railroads based on this https://archive.org/details/aar-signal-section-procedings-thb/AAR%201952%20AN%202017_05_05_09_52_06%20THB/page/n156/mode/1up
Shackles and chains for children's wrists and ankles. Two sizes for Halloween costume; prisoner, thief, zombie, slave or similar. The handcuffs have hinges and snap closed with click. Print one closure clip for each shackle.…
Shackles and chains. Two sizes for Halloween costume; prisoner, thief, zombie, slave or similar. The handcuffs have hinges and snap closed with click. Print one closure clip for each shackle, and two closure clips for each Leg iron.…
Blocky Iron Sights (combined in one piece) -- Barnacle for foam dart blasters with picatinny rail. I made these low profile, blocky style and clearly visible iron sights for my Barnacle. It's a bit of a loose fit at my Barnacle (but it's…
A unique 3D printable creation — this Barnacle Covered Anchor Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Pinnacle, or finial for a mast that goes on a railroad signal. It is for 5 inch mast, but can of course be scaled to your liking. Category: Buildings & Structures
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== This is for e26/e27 lightbulbs. You require a hanging light cord such as this: https://a.co/d/dKbt8kF You must use an LED lightbulb. 6-12% infill 5 top layers 2-3 outer walls.…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== This is for e26/e27 lightbulbs. You require a hanging light cord such as this: https://a.co/d/dKbt8kF You must use an LED lightbulb. 6-12% infill 5 top layers 2-3 outer walls.…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. No supports. ====================== MODERN MACHINE© STL files are…
Universal Peg for the Pinnacle Metal Pegboard System from Bunnings (Australia). This was recreated from scratch, so the tolerances are tight, you may have to scale it down slightly if it's too tight for you. But this fits mine and locks…
Overview: Double Barrel with two acceleration tracks Staggered triggers Optional Stock and Long barrel Lots of greebles Fun Reload Printing and Hardware: 180mm³ Printer required 3 Walls, 20% Gyroid Infill 4mm elastic cord like this stuff…
Slots into an Pinnacle shelf you'd get from Bunnings, Recommended to be printed on it's side with supports. The hook is ment for heavier item as it moved the mass closer to the shelf
