Counting matching models…
Simple holder for the camera TrueLife NannyCam H32. Base and holder are separately and ready to create your own holder. Both parts are conneced togetther with two M3x12 screws and two M3 nuts. Supports are required for a base only. Screw…
Truelife NannyCam V24 Mount Easy way to mount the cam to anything smaller than 25mm. Suggest 0.1 layer height for thread precision *update 13/01/21 - added a deeper bore version (original is 7mm, long version is 14mm deep) as per…
Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…
After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…
Šroub musí být zmenšen v celkovém měřítku na 99% kvuli vůli závitu.
New better version V2 here - TrueLife NannyCam camera holder - Version v2 od autora anthan.cz | Stáhněte si zdarma STL model | Printables.com Holder for TrueLife NannyCam H32 babyphone fits to edge of bed suitable for width 20-28mm only…
Update 6th May 2026: Thanks to mara5740_276777 I realized one file was missing. Just now added as "molette M6-Body" easy to print holder to fix the truelife nannycam R6 camera. PLA, layer 0.2 mm. Update: a second version for the base of…
This is a NannyCam Babyphone Holder wich can be mounted at babybeds. Hardware needed: 1 x Screw M12 x 40-70 1 x Wingnut M12 1 x Screw M8 x 30 1 x Nut M8 I used 4 Perimeters and 15% infill.
Can be easily mounted on various surfaces using a double sided heavy duty adhesive tape. Be sure to clean any dirt and oil from surface before applying the tape. Print from PLA.
Easy print holder for camera TrueLife NannyCam H32. I recommend split the screw to two halfs for easier print and then connect with glue.
I needed a holder for babysitting camera. Mount to bedframe profile 22,5 x 52 mm. For other mounting dimensions, part 3 and 4 need to be redesigned (if interested, you can PM me). For complete installation, you need: original mount…
Download and print .3mf/.gcode file with recommended supports and settings (with stop for inserting the nuts). Or Use holder body from original model (https://www.printables.com/model/549840-truelife-nannycam-h32-holder), and print .stl…
TrueLife NannyCam holder designed for in‑car use. When the baby is sleeping in the car in the driveway, it’s useful to monitor them with a camera. I power the camera using a 10 000 mAh powerbank. The holder snaps onto the headrest rod. I…
After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…
Easy print holder for camera TrueLife NannyCam H32. I recommend split the screw to two halfs for easier print and then connect with glue.
TrueLife NannyCam holder designed for in‑car use. When the baby is sleeping in the car in the driveway, it’s useful to monitor them with a camera. I power the camera using a 10 000 mAh powerbank. The holder snaps onto the headrest rod. I…
