Counting matching models…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
A keychain with the Fendt logo
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Literally just took the original Prusa Mini gcode file and in text editor changed the M92 line to M92 E415 in order to print well with a BondTech Extruder. Thanks to JamesHZ (https://www.printables.com/social/116023-jamehz/about) for…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Shower Towel Hook Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Available for 6, 8 and 10mm thick glass walls and doors. Have fun! Duschwand Handtuch Hacken…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Siku Fendt Gewicht
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Painted with acrylic paint Support under the chin and belly Made only with Prusa Slicer bottom from https://www.thingiverse.com/thing:3998602 top from https://www.thingiverse.com/thing:2477925 Print instructions Category: Toys & Games…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Allow Top loading of filament when using the BondTech Extruder. To make this work you will need a M3 x 50mm screw and hex nut. That was the hardest part as finding anything that long took some time. This is the arm only so you will need…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Der Haken ist für Küchenfronten bis 16,5mm stärke. Zum oberen Schrank/Schublade müssen mindestens 3,5mm Platz zwischen den Fronten sein. The thickness of your kitchen front has to be max. 16,5mm or aprox 0,65 inches and need a clearence…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Just a simple fendt keychain with the current logo Print at 0.2 without supports
Simple Hooks for Towel Radiators in your Bathroom. They fit on radiators with 21mm tubes. I added the Fusion360 as it is a nice beginner sketch to learn remixing. PETG is preferred due to better heat stability. It's super easy to print .…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Soutien câble pour la FLSUN SR pour l'extrudeur Bondtech GLX avec des ventilateurs 5015. il y à un passage pour mettre un collier il faut mettre un écrou carré livré avec le Bondtech dans le logement prévu à cet effet dans le GLX, sur le…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
IKEA Handtuchhalter mit 2cm Basis - beim Mutterkonzern nicht mehr lieferbar. Im Silber dem Original sehr ähnlich. IKEA towel rail with 2cm base - no longer available from the parent company. Very similar to the original in silver.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I got tired of my hooks regularly falling off my shelf when I took items from the original Ikea hooks, so I designed hooks that clip onto the bar and are secure in place. Works with kitchen wall shelf Ikea Grundtal or any 16 mm diameter…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Inexplicably, Thule doesn't include an adapter for 12mm thru axles with the Roundtrip Transition hard case bike travel box (even though it's available as an accessory). This part solves that missing item. NOTE: This only fits the…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
Hey Zusammen! An unserem alten Schätzen und mobilem Heim bleiben so manche Reparaturen leider nicht aus. Viele Dinge muss man teuer einkaufen oder sind schlichtweg nicht mehr verfügbar. Dies zum Anlass habe ich beschlossen, mir einige…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Der passende Clip zum Aufhängen von Handtüchern an einem Rohrheizkörper / Wandheizkörper. Optimiert für einen Rohrdurchmesser von 20mm. Das Bild spricht wohl für sich, ein Druck ist einfach, da in der seitlichen Lage keine Überhänge…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
A double hook for two scissors (or anything else) for IKEA kitchen rail systems, or any rail with 16mm diameter. It sits stable on the rail, so does not lean, if you hang something on one side only. Print it with snug supports for over…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Zum schnellen Trocknen von Handtüchern habe ich diese Halterung zum Einhängen in die Heizung entworfen. Die eingesetzte Gardinenstange hat einen Durchmesser von 12,8 mm und muss fixiert werden. Das kann man mit Kleber machen oder, wie ich…
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for PETGSource material: PET
Passend für ca. 30 x 30mm Vierkant und Ausschnitt für Durchmesser ca 23mm Suitable for approx. 30 x 30mm square and cut-out for diameter approx. 23mm - Besonders zu empfehlen, wegen Stabilität und Temperatur: Filament: PETG Perimeter: 4…
Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
Ein simples und schnell zu druckendes Gehäuse für eine openDTU. Ich habe meine openDTU Installation für einen HM-600 auf einer Lochrasterplatine verlötet. Neben dem ESP32 passt in das Gehäuse ebenfalls das Funkmodul und das Display.…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
This is a case for the OpenDTU breakout board (easy to order from a board manufacturer using, e.g., KiCad). It has clips at the bottom to hold the board (not moving around) and a hole for the external antenna. I have used this with…
Print approx. €2.75–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
Nachdem ich immer wieder davon genervt war das mir dir Spültücher vom Spülmaschinen griff herunter gerutscht sind hab ich mir schnell diesen kleinen Clip für meine Spül- und Handtücher entworfen. Er passt sehr gut auf einen horizontalen…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Wind Tunnel This is another custom front-panel design for the MasterFrame 600 for the CoolerMaster FreeForm Competition. The model is based on the wind-tunnel principle used in the HAVN 360 case. The goal is a straight, unobstructed…
Print approx. €9.51–€11.62 excl. taxPreliminary estimate for one variant
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…
Extruder. Bondtech BMG style. Bobblejot Website Bobblejot GitHub Bobblejot Twitter Bobblejot Patreon So i have decided to finish building my IDEX machine at the beginning of the new year and made the choice to use a direct drive Bondtech…
This is a 3D printed Case for the OpenDTU Breakoutboard by blinkyparts.com: https://shop.blinkyparts.com/en/OpenDTU-Breakoutboard-Your-evaluation-for-your-balcony-solar-system/blink237542 The OpenDTU breakout board can be used to read out…
Hi! This windwheel works wonderfully and because its fully ball beared the slightest breeze is enough to make the wheels spin fast :) Printing: -Parts are constructed that everything is very easy to print even on old 3D printers and not…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
This is a improved hand tool for using cardboard screws designed by wyliebutler It is designed tp be printed flat lying on the printbed to have a layer orientation along the length of the tool. This makes it very robust compared to a tool…
In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…
I modeled this Bondtech BMG Direct Drive Extruder mount for the Ender 3 pro because of finding other models that caused hole misalignments to the original aluminum mount. Layer Height: 0.16mm Infill: 25-50% Supports: Yes (Tree Supports)…
Thanks to cooasty for the beautiful pinwheel. The two propellers are counter-rotating and have a nice "hypnotic" effect due to their shape. After cooasty's windmill had survived a few years and storms, I wanted to build the windmill…
Its a cassette, but you print it. Not much practical use outside perhaps for artists or tape loop creators wanting to experiment with custom shells. The two parts of each half are glued together with superglue, see video for more details.…
Wandtattoo Vespa Roller Größe frei änderbar
If necessary, the model can be cut in the slicer and the scale of the model can be increased.
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
Printer: Mega X Filament: black PLA Note: Scaled to 420%
Update: 09.06.24. Installation guide added. Update: Also see my new Libra & Trigger Extruders that uses Orbiter internals. By popular request, new threaded insert mounting version. Also see original version here:…
OFFICIAL INDX SV08 OG & SV08 MAX INTEGRATION By appointment from Bondtech! Bondtech supplied an INDX unit for testing & systems implementation. Welcome! Im glad you found us here! So you want to add INDX to your Sovol printer. This is…
I did a fusion 360 reverse engineering of stl files. I modified the path of the gear to better fit and generally improved to print with FDM printer UPDATE 1 05/12/18* Added a new screw to better keep in place the e3d v6 extruder with less…
Case with snap on lid for OpenDTU with 0.96 OLED Display. https://github.com/tbnobody/OpenDTU This case is based on Case for OpenDTU Breakout Board by bjoerns1983 Hardware i used for this: ESP32 NodeMCU with CP2102 NRF24L01+ with…
Thank you airfish for the beautiful counter-rotating illusion wind turbines. I couldn't find the original pinwheel anywhere anymore... I enlarged the wind turbines to 200 mm and added hubs for ball bearings 608ZZ (22x8x7). There are 4…
Chocolate holding Reindeer head where the sweet becomes the nose.
Ein Haken zum einklicken in einen Handtuch-Trockner-Heizkörper Original.stl: 25.11.2020 Durchmesser der Rohre: 23 mm, Abstand der Rohre 22 mm Damit fällt das gefuzzle beim einfädeln der Handtücher weg. Einfach an den Haken hängen und es…
This is a remix of the Original Bondtech BMG Upgrade extruder to integrate the new MK3S filament sensor. Work only for Bear X axis. I did also some modifications to be friendly printable with FDM printer. I added a version of the extruder…
A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…
I was really looking for a good fan duct for the Bondtech BMG setup on my CR-3D C1. https://www.cr-3d.de/unsere-produkte/c-serie/ But obviously this fanduct will fit on any setup with an E3D V6 and Bondtech BMG Extruder (Volcano Version…
A very simple and minimalist holder for your guest towels in the bathroom. The design can be printed on any printer without any problems, even on mini printers with a very small installation space. The holder consists of several parts…
I didn't find anything fitting my use-case, so I took the excellent https://www.printables.com/model/427556-ahoydtu-gehause-case-dtu-ahoy-opendtu and https://www.thingiverse.com/thing:4738646 to combine into the above and give enough…
I used PETG. Parts needs to be glued together. I used super glue. This is great solution when your old grundtal broke and you have to wait until your neighbor borrow you welding machine…
Longer M3 Screw is required where fan mount goes, I think I used a 12mm, but I don't recall. I'll try to update later. Two parts, hopefully it is obvious how to assemble. Use one of the 3 spacers (.5mm, 1mm, 2mm) depending on your setup.…
Thanks to LegoRJ35 and strikingfpv for the toroidal propellers. Made it into pinwheels with 200 and 250 mm diameter and a hub for 608ZZ (22x8x7) ball bearings with a nice illusion effect. There are 12 different wind turbines with 3x, 4x…
Another case to give your pcb from the Discord-Server of https://ahoydtu.de a home. This version is for the longer NRF antenna which protrudes slightly above the board. The USB connector sits a little deeper due to the longer housing.The…
Es gibt zwar schon den ein oder anderen Ständer aber ich wollte ihn etwas anders und grundsätzlich ohne viel chichi. Er ist so konstruiert, dass das Wandthermostat genau passen sollte und man ihn mit etwas Kraft auch einfach wieder…
Das Modell habe ich mit Fusion 360 erstellt, mit 0,10 mm Detail und Stützen “gesliced” und mit 100% Infill in PLA ausgedruckt.
Update: Also see my new Libra & Trigger Extruders that use Orbiter internals. There is now a threaded insert mount version in addition to this one, see link:…
Towel Holder for the kitchen. It fits one towel. - Handtuchhalter für die Küche. Passend für ein Handtuch.
Schlüsselbrett Handtuchhalter Haken
This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor
A Simple lock to your Bondtech extruder support PTFE tube
*Work in progress. Still need to add pictures and documentation. Files used to add the Bondtech INDX system to a Voron Trident R2. Additional Hardware Required Front Idlers 1515 Extrusion (Horizontal frame extrusion width minus 35mm, ex.…
This is a solid Model of the Lgx lite extruder. The model comes from the bondtech's websight but I converted the file from .step to .obj to save others some time if they want to to a quick & dirty mock-up for there printer Category: 3D…
This is a remix of Wardy89's MK3S filament guide on Thingiverse ( https://www.thingiverse.com/thing:3425397 ) This is designed to fit the Bondtech BMG upgrade for the MK3S and the MK2.5S with either the V6 or Slice Mosquito Hot ends. The…
The Demon INDX Belt Helper Tool allows you to keep both hands on the job without loosing track of your belts. It lets you lock the belts in the correct position relative to each other - so they'll always be the same length next to each…
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…
This hanger will clamp to the heater and stick. Use the f3d file to adjust all parameter according to your needs. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter Supports: No Resolution: 0,02 Infill: 10%…
As I really loved the E3D Revo hotend on my Ender and they recently came with a High Flow version, I decided to make a conversion kit for the V400. I admit, it is not cheap and it does not print much better than a Volcano, but it is very…
This case I build for my OpenDTU Fusion PCB. With the big display you could see the actual production of your solar system. The display is secured with the 2 bars that are clamped into the housing behind the display. You could print it…
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Extruder. Bondtech BMG i3. Bobblejot Website Bobblejot GitHub Bobblejot Twitter Bobblejot Patreon I saw the new upgrade from bondtech for the i3 and liked the idea of putting it on my Axis One machine but wanted to make a few tweaks for…
Danke an das super Design von @Gnorzkopf. Für einen ESP32 habe ich die Breite der Schienen etwas erweitert und das Gehäuse verlängert. Die Rückwand passt problemlos. Zum Drucken habe ich das Gehäuse auf die Front gelegt und organische…
Edit: There is now a sensorcover with a latch for the cable connector. To adapt my MK3 with Bondtech extruder to my MMU2S with the new IR sensor I made a new topplate with sensor housing. Included is a LED indicator to visualise the…
Extruder. Bondtech Mini Style. Bobblejot Website Bobblejot GitHub Bobblejot Twitter Bobblejot Patreon Note 04/12/18 - Have added new Lid variations as requested. There is now a version for: 1/8" BSP threaded fittings ( E3D Plastic…
MK3S extruder body adapted to fit bmg and both mk3 and mk3s sensors. No need to reprint the body if you want to change to mk3s IR sensor. The IR sensor module is an adaptation of bondtech solution for their mk3 bondtech upgrade. I…
Bondtech INDX system, files origin from https://github.com/BondtechAB/INDX I have painted this toolhead step file and separated each component to STL, so you don't have to I also share you a Blender file for rendering
This is the R4G extruder for Prusa printers, where the G stands for Greg or Geared. It's a DIY "Bondtech upgrade" that requires a very limited set of additional parts. It is derived from the Prusa R4 extruder of the MK3S (…
The gear lever knob is designed for multipurpose use and not only for a special tractor. Thats the reason why the gearshift pattern is a seperate printed part. I didnt want to make several tests for a clamped part, so I connected the…
Gloomhaven is awesome, but...let's replace the cardboard chits with something more interesting, right? I found a lovely rat from dutchmogul under the Share Alike-Creative Commons-Non Commercial license, and repurposed it. I chopped off…
Badezimmer Handtuchhaken. Für Rohrdurchmesser 22,5 mm.
Thanks again to Lukass for the great Archimedes wind turbine. For my second remix, I used the original size of the Archimedes spiral and created a new frame with ball bearings and five different sets of tails. It turns even with barely…
Haken für Handtuch oder Badetuch
This is a mount for ebb42 tool board to the Eva 3 carriage when using a bondtech LGX extruder. It uses a 4mm composite rod for the umbilical and m3 heat inserts. The inserts are sunk deeper so they don’t touch the board. The composite rod…
i want to have the Bondtech LGX Lite on my V400, so a did a design and make it on my V400 now already is on my Printer and works great i am share it to other people who want the Bondtech LGX Lite on his or hers V400 Printer they are free…
There are two fan shrouds, i have modified. DDX_Fan_Shroud_5015 This is a mod from a non-v3 version into a v3 mount version. You need two M3x20 screws to mount the fan to the shroud and a M3 nut for the DDXv3 mount. DDX-V3_Fan_Shroud_5015…
Ich habe den ersten Druck in PLA gemacht. Ich denke, PETG wäre noch besser geeignet, aber bisher funktioniert es sehr gut mit PLA bei mir. Hält bei mir besser als das Original. Support: JA Infill: 15% Layerhigh: 0,2 Brim: Yes I did the…
Bondtech Extruder Prusa i3 MK3s Sensor Cover for reverse bowden with PC4-M10. In this case you would only need to use the "vslot_mount_pc4-m10" of the Bear X axis and Extruder. Here is a link for the Reverse Bowden, where the file…
Thanks again to rosch8 for the beautiful original wind turbine. I recommend printing the successor, the MK3. The bearings on the MK2 wind turbine are difficult to install without causing binding, and temperature fluctuations can also lead…
Direct drive mod for the Anycubic Kobra Max using the Bondtech LGX Lite extruder (https://www.bondtech.se/product/lgx-lite-large-gears-extruder/). This mod aims to be as simple as possible, keeping the original hotend case and the…
Eine Nachbbildung des Windrades Nordex N175/6.x und der Windturbine Vestas V172 - 7.2 in ungefähren Maßstab 1:500. Es handelt sich um eine stark vereinfachte Abbildung. Die Nabe der Windkraftanlage ist ca. 25cm hoch. Die Bauteile können…
A bicycle spoke tension meter based on the original Jobst Brandt design, my personal favorite. Once calibrated, the tension meter is less affected by spoke geometry than others because the deflection is measured from the same side as the…
Für Heizkörpermodelle mit runden Stäben und Stabdurchmesser 22mm und Stababstand (Mitte-Mitte) 42mm
Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.
Additional parts needed: 2x miniature ball bearing 8mm x 22mm x 7mm (eg. https://www.amazon.de/gp/product/B07HGXXX37/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&language=en_GB¤cy=EUR ) 4x screw M6x10 4x screw M6x16 8x nut M6…
Full extruder assembly that connects direct extrusion BondTech BMG with E3D v6 hot end to linear rail via an extrusion mount that also holds a proximity Sensor. It makes for a nice compact setup. There are two extruder brackets included…
Work in progress of the Reverse mounted gantry for Bondtech Indx and Voron V2/Micron2020 recommended to use BFI front idlers if you use this setup you need to replace the rear extrusion with a piece of 1515 BOM In addition to stock v2…
This is a compilation of things in order to upgrade (or build) your Prusa I3 MK3S with MMU2S and Bondtech BMG extruder kit for MK3. I used the Bear X-Carriage with an adaptation for the Bondtech extruder and MK3S filament sensor (source:…
