Counting matching models…
The Sandvich from TF2 arrives! This model stays mostly true to the original sandvich outside of some moving around of pieces so they don't clip into eachother, thickening walls, and flattening the bread a bit so it can sit flat on…
English: Camera holder for baby monitor Philips Avent SCD923/26 for IKEA SUNDVIK cot. Easy to print! Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Držák kamery chůvičky…
This was a commercial project I worked on for a company but it is finished and now I have the right for distributing my work. If you want to buy this kit professionally printed, you can send me a message and we can arrange it. There is an…
We were tired of always searching for pacifier in the dark so I made a bin for pacifier (or whatever you want to put in) which clip on the side of the Sundvik crib. The bin is in two part to allow for no support but a small assembly. I…
This is book holder design to clip on the side of the IKEA Sundvik crib. I made two version. A plain one (easier to print) and a honeycomb version. The honeycomb is 25% lighter than the plain version, it's easier to see the book in the…
Quick model release; Buffalo Steak Sandvich! Though it's not really a sandvich is it? Anyways wanted to get atleast one prop for every single class slot out before i decide to make everything else TF2 has to offer! Next upload (right…
I overtightened the original one and it broke. This is for a Sundvik baby bed but fits others that use the sam part as well
IKEA Sundvik Crib - Height Increaser I needed to raise the bed by 60 mm and therefore made this one. It becomes a total of 100 mm where 40 mm is a tight fit around the leg. Print instructions Category: Household Print Settings Printer…
It is easy print with no support material. Holes for M6 screws are without thread but the screw will cut its own thread (no need to tap the hole). To assemble you will need: -4x M6x12mm IMBUS screw -1x 60x60 casters with or without a break
This model will raise the SUNDVIK table by 6 cm. It is based on the model that will raise the crib by 6 cm, just other measurements to fit the legs of the table.
This is a remix of TG Tom's great E1 Mount with a modified width of 27mm to accomodate an IKEA Sundvik baby bed plus felt glider insert. Use M3 screws and nuts to mount the official mount that comes with these cameras. Thanks to TG Tom!
IKEA SINDVIK door handle. 80mm in length but easily edited to whatever length you need.
English: My wife wanted to hang bag on IKEA SUNDVIK cot. So I made one massive for her. Print on the side, no support needed. Please don't forget to share a picture of your print. Czech (čeština): Žena chtěla na postýlku IKEA SUNDVIK…
If you want to achieve a 5% inclination of your IKEA SUNDVIK cot for your baby, you can use this leg extension. Model contains also 2 holes for wood screws.
Reolink Baby Camera Crib Mount for IKEA Sundvik Safely monitor your little one with this custom-designed mount for your Reolink baby camera and IKEA Sundvik crib! Attach your Reolink baby monitor to the side of an IKEA Sundvik crib.…
Diese Trenner werden mit einem zwischen Brett in der Schublade verschraubt.
Secure & Practical IKEA Light Holder for SUNDVIK Crib Enhance your nursery with this sturdy clip-on light holder designed specifically for the IKEA SUNDVIK crib . It allows you to attach the IKEA EBBARED light without the need for screws…
I wanted to do some custome changing table for our newborn. Because we dont have very much space in our flat i decided to do it difrently. I drawed a hinges and bearing surfaces and printed it (the files are here). The rest is on you. You…
I recoment to use the .step file to print it is simpler to get the text in a diferent coler at least in bambu slicer. I printet in ABS with 5 walls, 5 Top/botom layers and 20% infill
A cover for the phone location of the SoundVision SV200W.
Model jsem vytvořil, protože mne štvalo jak se desky všude pletou. Držák má 9 pozic, takže se do něj vlezou všechny desky + 2 desky zůstávají v sendvičovači. Tisknul jsem z PETG v řezu uprostřed s konektory.
I recoment to use the .step file to print it is simpler to get the text in a diferent coler at least in bambu slicer. I printet in ABS with 5 walls, 5 Top/botom layers and 20% infill
Design for Ikea Sundvik bed. Slides onto the side rail to hold a water cup/bottle and extra small items. Requires supports.
Original plugs get weak as the self tapping screws cut into the thin wall. This model has the wall thickened and thread partially pre-modelled. The thread is just lightly undersized for snug fit.
This is a handy hook that is very easy to print and fits perfectly onto the head or foot board of your Ikea SUNDVIK bed frame.
This is a stronger version of my Ikea SUNDVIK bed frame hook. Of course the little ones found a way to remove the other version. This one is harder to remove for tiny hands. It's a hook that is very easy to print and fits perfectly onto…
This adapter (holder) allows mounting the YI Home camera on the IKEA Sundvik bed. You just put the camera inside it and can easily mount it on the bedside allowing you to watch your newborn child all the time. Parts needed: M3 nut and M3…
IKEA makes a folding bed, Sandvika. It has four cross-braces for the center legs, made out of cheap aluminum with stamped rib - these have a tendency to bend and break, and you can't buy a replacement. It is likely trivial to make a metal…
I wanted a holder for our changing table to hold / store dry wipes and diaper bag rolls, but could not find any, so i designed this. This will fit a whole pack of dry wipes wich are commonly available in grocery stores in norway (10x10cm,…
Door lock for IKEA Stuva box & Sindvik door. It's for the enclosure for my Prusa i3 MK2. Should print easily with no supports. You need 1-2 screws. [Update] Added another version where you can more easily control and adjust the lock…
Small hook for Ikea SUNDVIK desk , I prefer a backpack hanging rather than lying on the floor :) Printed in PLA
A easy to print bottle holder for MAM bottles. Can be mounted on a IKEA Sundvik bed.
Use this to attach a roll of Ikea Måla paper to the 76x50 Sundvik desk. You will also need 4 x 3.5x16 countersun head screws and a length of 14mm dowel. I printed the brackets out of PETG with 40% cubic infill. The part of the brackets…
