Search results: nen

Sort order

2,901 models

P
Printablesfivesixzero

Biegelehre Improved - Through-hole component lead bending tool

Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…

Print approx. €3.90–€4.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,762
Likes
185
Rating
4.88
P
PrintablesCalebTimoteo

Lamborghini Veneno (Print-in-Place)

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)

Print approx. €3.27–€4.00 excl. taxPreliminary estimate for one variant

Downloads
1,330
Likes
137
Rating
4
P
PrintablesMehTechArt

Lamborghini Veneno Wall-mounted

Please click if you appreciate my work :) Aggression. Geometry. Obsession. This 3D printable wall sculpture of the Lamborghini Veneno is for those who believe design should strike like a weapon. Based on one of the rarest and most radical…

Print approx. €14.63–€17.89 excl. taxPreliminary estimate for one variant

Downloads
709
Likes
173
Rating
5
P
PrintablesAllpa

Child safety lock for seat belt (3 versions) // Kindersicherung für Sicherheitsgurt PKW (3 Versionen)

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
599
Likes
135
Rating
5
P
PrintablesCoolBlackCat

Sternenfahrer von Catan - Ersatz Treibstoff Ring

Designed for the 1st generation rockets of "Die Sternenfahrer von Catan" von Cosmos. Brim and support on build plate only are required. The replacement ring require to remove the existing (often broken) boosters' fixations. I did use a…

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
113
Likes
4
Rating
0
P
Printablesayjay

protective jaws for a vice with holder for round material like pipes - Schonbacken für einen Schraubstock mit Halterung für rundes Material wie Rohre

The protective jaws have notches with which round material such as pipes can be securely clamped. There are holes for magnets (diameter 6 mm, height 3 mm) included. This is possible vertically or horizontally. It works well with PLA, but…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
104
Likes
15
Rating
0
P
Printables0

Lamborghini veneno hot wheel

Print un place boquilla 0.4

Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
5
Rating
0
P
PrintablesPeopleware

Platinen Steckverbinder 2,54 mm im Selbstbau

Bitte nehmt an einer Abstimmung teil, damit ich abschätzen kann, wieviel Aufwand ich in meine Beschreibungen einbringen sollte.: https://www.pww2.com/abstimmung Im Rahmen meines OpenDTU Projekts, das ich hier auch vorstellen werde (vor…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
5
Rating
0
P
PrintablesThommyfix

Solar Dörrapparat um Chili, Kräuter, Apfelringe, usw. zu trocknen. Die Trockenbleche sind aus den Seitenteilen von Prusamentspulen.

Ein einfacher Dörrapparat um Kräuter, Chili, Apfelringe, usw. zu trocknen. Im Inneren des Behälters sind 3 Trockenbleche aus den Seitenteilen leerer Prusamentspulen untergebracht. Je nach Sonneneinstrahlung erwärmt sich das Behälterinnere…

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
14
Rating
0
P
PrintablesJori

Rugged EDC container for "Normbrunnenflaschen" and PET bottle caps

Works with the caps of this style of bottles: https://de.wikipedia.org/wiki/Normbrunnenflasche …As well as PET bottle caps. Bigger version includes a small hole in the bottom to add a 4mm Paracord loop for keychain. Container seals…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
8
Rating
0
P
PrintablesFullhouse

Innensechskantdreher mit Schaft

Es gibt keine Besonderheiten zu beachten beim Drucken dieses Werkzeuges. Es soll eine Möglichkeit bieten auch Sechskantschrauben mit 13mm Durchmesser zu in engen Stellen zu lösen. Als Bspl. jedes handelsübliche Waschbecken hat genau…

Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
0
Rating
0
P
PrintablesM.Hedrich

Nutschienen Kabelhalter CaraLife

Hallo du Macher, ich habe hier eins der praktischsten Drucke die ich bisher für meinen Weinsberg CaraLife Van konstruiert habe. Mit dieser kleinen Klammer kann man kinderleicht Kabel oder kleinere Sachen an das Nutschienensystem des Vans…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
0
Rating
0
P
PrintablesStudio Mechanik

Various components for Mechatronics Electropneumatics Testing Boards ELM.03 ELM.06

Various components for Mechatronics Electropneumatics Testing Boards These components were helpful to use with various manufacturers pneumatic components such as actuators, valves or other components with a preparation for ELM.03 ELM.06…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
1
Rating
0

Pumpensumpf Springbrunnen

Ich habe einen Pumpensumpf entworfen bei dem über den inneren Korb eine Nylon-Probiersocke aus dem Schuhladen gezogen wird und das ganze von einem äußeren Korb geschützt wird.

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
1
Rating
0
P
PrintablesMatteo Pisanu

French Door Flap Blocking Component

This component, now discontinued, is used to allow the French window to switch from tilt mode to door mode.

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
0
Rating
0
P
Printablestom

Adapter für Akku-Staubsauger auf dünnen Schlauch/ Adapter for cordless vacuum cleaners with a thin hose

Mit diesem praktischen Adapter kannst du einen Schlauch mit den Maßen D10 mm x 2 mm (Außendurchmesser 14 mm) an den Akku-Staubsauger HS-7005 von Rossmann IDEENWELT Best Basic anschließen. Ideal geeignet, um schwer erreichbare Ecken – wie…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
0
Likes
1
Rating
0
P
PrintablesMike

wind-up Bathtub Boat V5 - with benchmark test - Badewannen Boot zum Aufziehen - Funktionsfähig

I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…

Downloads
15,963
Likes
8,063
Rating
4.92
P
PrintablesGelap

Govee Permanent Outdoor Lights Pro Mounting Brackets & Accessories

This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…

Downloads
4,958
Likes
443
Rating
5
P
PrintablesLoogle

Gaggiuino Component Housing

Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…

Downloads
4,259
Likes
165
Rating
4.91
P
PrintablesJohination

Hochzeit Geschenk Herz Unendlich/ wedding gift heart infinity /Mr & Mrs

Remix from: @cesar8718 with thing and @mili1954 with thing I put the two models together so that you can put them together and additionally glue to ensure optimal hold Rafts: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10%…

Downloads
3,435
Likes
440
Rating
4.93
P
Printablesmatej

upholstery clip 8mm / prichytka calouneni 8mm

Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…

Downloads
3,329
Likes
1,339
Rating
4.4
P
PrintablesMordemot

Modular drawer for electronic components (Vase mode)

Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…

Downloads
3,259
Likes
701
Rating
4.63
P
PrintablesIconic FAB

The RIG (R1.1) — DIY helper stand for testing electronic components

ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…

Downloads
3,065
Likes
2,037
Rating
4.88
P
PrintablesMister4D

Turbinen Pfeife / Turbine whistle

The only thing that is important for this model is enabling elefant foot compensation so that the print will turn out very precise otherwise the whistle wont make a sound.

Downloads
2,717
Likes
833
Rating
3.75
P
PrintablesAdam Raining

Darth Vader Tie Fighter (single filament print) - better components separation (only 6 plates of components)

Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…

Downloads
2,537
Likes
904
Rating
4.86

Lamborghini Veneno

This is a highly detailed 3D printed model inspired by the Lamborghini Veneno , designed to look like a real-life print — not a toy, not painted, and not multi-color. The entire model is printed in one single color , including the…

Downloads
2,506
Likes
217
Rating
4.6
P
PrintablesBeo666

Duschkabinenhaken Handtuchhaken v1 Doppelt

Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.

Downloads
2,500
Likes
858
Rating
5

resistor lead forming tool - component bender - plieur de composants

This is a 3D printable file to get a component bender (CBH5). Series Description 0.3": 2 positions 0.4": 4 positions 0.5": 8 positions 0.6": 7 positions 0.7": 7 positions For bending of electronic components to a standard pitch size Base…

Downloads
2,431
Likes
149
Rating
4.89
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Gerade / BRIO Thomas IKEA eBay kompatibel

Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Construction Toys

Downloads
2,292
Likes
291
Rating
5
P
PrintablesWindchill

Topographic Continents

I started out with the world map from toddsplod67 and ripped out just the continents. https://www.thingiverse.com/thing:116228 My son then printed them for his grade geography project. No guarantees on actual geographic content. Island…

Downloads
2,002
Likes
404
Rating
5
P
PrintablesMarcelismus

Tube Squeezer / Tubenentleerer v2 (for metal tubes) - 40-85mm

A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. Version 2.0 (2023-11-21): I have recreated the " Tubeentleerer " by Boomi and slightly reworked the design, so the dimensions are very similar to the…

Downloads
1,943
Likes
199
Rating
5
P
PrintablesFoden

Govee Permanent Outdoor Lights Mounting Bracket

Please feel free to support me so I can create and share more. Any amount is much appreciated PayPal me I've seen that a lot of people have issues with the 3M tape on these LEDs. So not wanting to go onto my roof more times than I have to…

Downloads
1,641
Likes
92
Rating
5
P
PrintablesMats Ludwig

Wall Switch & Socket Components – compatible with Busch-Jaeger Reflex SI Schuko&Wippe&Rahmen

Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…

Downloads
1,625
Likes
678
Rating
5
P
PrintablesKickbut101

Terraforming Mars components

Tip/Donate Components for the game "Terraforming Mars" by Stronghold games; -"Player Cards" which sit atop (or in place of) the player card you use and play on for the game -"Cube Trays" that help hold together the different unit cubes…

Downloads
1,594
Likes
189
Rating
4.43
P
PrintablesChristian

iMac to 5K Display components

english version see below. ------------------- Einen älteren iMac 27" kann man zu einem wirklich guten 5k Monitor umbauen mit wenig Aufwand! Das Video von Andi zu diesem Thema ist zu finden unter Andi hat den Umbau sehr gut erläutert! Ich…

Downloads
1,589
Likes
51
Rating
5
P
Printablesthtechnician

Gear Shifter Fidget Keychain (no extra components)

Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…

Downloads
1,565
Likes
58
Rating
4.71
P
PrintablesTomivol

Tool Box SMART mit 12 verschiedenen Einsätzen

Toolbox SMART für Einsätze mit unterschiedlicher Aufteilung oder nur mit Trennsteg Größe Innen 200x185x39 (L-B- H) + 14,5 Deckelhöhe Benötigt werden 6 Schrauben M3x30 ohne Griff oder 4 Schrauben M3x20 und 2 Schrauben M3x35 wenn mit Griff…

Downloads
1,478
Likes
476
Rating
4.75
P
Printablesstew675

Permanent Bed Platform Levelling Blocks for the Qidi Plus 4

Summary Designed to fit over the Z-stepper mounting bolts in the base of the print chamber (see photo). The model is a single piece. Print two of them. Discussion When doing a platform calibration, the printer will bring the print bed to…

Downloads
1,436
Likes
198
Rating
4.8
P
PrintablesArun Kumar

Robotic Arm with a base for components

Modified version of the robotic arm by @RACBOTS_756978 The bottom case can hold a 2x8 cm PCB. A clear build video below.

Downloads
1,426
Likes
61
Rating
5
P
PrintablesMistertech

Ball and Socket Locking swivel components

I designed these components for a Smartphone holder ( http://www.thingiverse.com/thing:1778271 ). I thought that other people might find the ball and socket assembly to be useful for one of their projects. Unfortunately, I resized it a…

Downloads
1,416
Likes
120
Rating
5
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Kurven / BRIO Thomas IKEA eBay kompatibel

Update: 23.01.2014 added separate files for each curved track also added a new radio curved track for really big curve :-) The normal curve should be the Kurve_180_45.stl Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words…

Downloads
1,339
Likes
180
Rating
5

Karl Ruprect Kroenen bust – Hellboy

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint This one is a two part bust with a separate base. Supports will be needed for the back of his…

Downloads
1,234
Likes
255
Rating
5
P
Printablesjq910

1/10 Scale Miniature PC (With Internal Components)

A very small pc with internal components. The .STEP file is included if you want to create your own components for it. Print with resin for best results. The side panel is optional and can be printed with clear resin You can get a…

Downloads
1,221
Likes
318
Rating
4.73
P
Printablesthechdiing

Lamborghini Veneno

A 3d model of this exclusive car

Downloads
1,103
Likes
53
Rating
3
P
PrintablesBooks

Galadriel's Ring of Power, Nenya (Lord of the Rings)

Model of Nenya, Galadriel's Ring of Power by jugglenerd . Originally uploaded to Blend Swap .

Downloads
1,074
Likes
161
Rating
5
P
PrintablesBoomi

Tubenentleerer

Kleinere Version:

Downloads
1,058
Likes
99
Rating
5
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Bruecke Auffahrt / BRIO Thomas IKEA eBay kompatibel

Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words printing on the sind works for me .. a new version v2: a little higer so that can drive an train under the upper rails Category: Mechanical Toys

Downloads
1,058
Likes
134
Rating
4.64
P
PrintablesM Reynolds

Govee Permanent Outdoor LED Light (Pro) Mount (No supports)

This Govee Pro outdoor LED light (HERE) mount is friction fit around the top of the LED but remains loose around the bottom. This allows the mount to be placed over the strand (and not fall off) while attaching outside. The design is…

Downloads
1,037
Likes
61
Rating
5
P
PrintablesChiSao

Verstellhebel Sitzschienen Schlitten v-klasse marco polo

Bedarf keiner Anleitung ;-) Und da ich STL nicht ausstehen kann hier auch die Fusion Datei

Downloads
1,017
Likes
27
Rating
5
P
PrintablesLord Asdi

SMD Component Tape Magazine (8, 12, 16mm)

Recommendations It is recommended to print the models in PETG because the lid includes thin tabs which might break off if layer adhesion is bad. Print Settings Layer height: 0.25mm Perimeters: 2 Bottom layers: 3 Top layers: 4 Infill: 0%…

Downloads
959
Likes
146
Rating
5
P
PrintablesBeo666

Duschkabinenhaken Handtuchhaken v1 Solo

Dieser hilfreiche Haken ist konzipiert für Duschkabinengläser von 6 und 8mm. Bitte dafür das jeweilige Druckprofil auswählen. Ich empfehle den Druck in PETG oder ABS. Ideal für Handtücher, Glasabzieher oder anderes Duschaccessoire.

Downloads
940
Likes
265
Rating
5
P
Printablesrotto

OttoBox customizable component desktop tool holder

I saw a number of tool organizers available for download but I wanted both something specific for the tools I like to have around, as well as something modular that I can change later. All the pieces snap together and glue is not needed…

Downloads
928
Likes
428
Rating
5
P
PrintablesJosh Makeshift

Fully Customizable IKEA Components Parametric

Build Your Own IKEA Pieces using this fully parametric SKADIS component library! For best results, please use the most updated version! Current version: v2.1 This is my first pass at creating building blocks using IKEAs SKADIS design as…

Downloads
913
Likes
783
Rating
5
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Kreuzung Kurve 3 / BRIO Thomas IKEA eBay kompatibel

Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys

Downloads
850
Likes
155
Rating
4.94
P
Printableslightning101

Lock box with sliding latch - single bed print, no additional components needed.

Lock box with slide style latch. No pins or bolts needed on this one. 3 hour print on bambu p1p. 95grams filament. Tested in ABS, PETG and PLA at only 15% infill. Lock needs to be slid in to one half before locking two main halves…

Downloads
838
Likes
67
Rating
5
P
PrintablesTapRackBang

Govee RGBIC Permanent Outdoor Lights Magnetic/Screw Mount

Picked up a set of the Govee RGBIC permanent outdoor lights but I'm not a big fan of the idea of using the adhesive. Partially because I don't want any residue to clean up in the future should these lights fail or loose their appeal and…

Downloads
823
Likes
78
Rating
5
P
Printables3d_droide

Wago 221 / 2273 Hutschienen Halter ( Wago 221 / 2273 Din Rail Mount )

Wago 221 / 2273 Hutschienen Halter ( Wago 221 / 2273 Din Rail Mount ) Passend für Standart 35mm Hutschienen. Hutschienen Halter für verschiedene Wago. Halter_3x_221-2_3_5.stl Wago 221-412 Wago 221-413 Wago 221-415 Bei diesem Halter sind…

Downloads
779
Likes
65
Rating
5
P
PrintablesAppendix_pi

Stackable drawers for electronics components and small parts

I needed a drawers for my electronics and small parts. I could have bought it but why If I can design and print it by myself? This design was born out of the need of something that I could keep on my desk, practical and easy to access…

Downloads
758
Likes
128
Rating
4.5
P
PrintablesDeejay

Spacer für Mac Ride oder Shotgun Kindersitz bei Cube Bikes mit innenliegender Kabelführung

Der Spacer ist für Cube E-Bikes, bei denen die Kabelführung innenliegend im Vorbau ist und man den Mac Ride oder Shotgun Kindersitz installieren möchte. Dafür die 3 teilbaren Spacer ausbauen, den obersten Spacer ganz nach unten, dann den…

Downloads
735
Likes
26
Rating
5
P
Printablessvenlaaange

Hörmann HS / HSE Sonnenblendenclip

Halterung für Hörmann Garagentor Sender. Hab das Modell schon häufiger gesehen, aber nie zum Download gesehen. Somit habe ich es konstruiert. Vom Garagentorsender gibt es eine Variante mit Chrome und eine mit Kunststoffrahmen. Ich habe…

Downloads
733
Likes
30
Rating
5
P
PrintablesTech-AG

Organizer for electronic components

Attention! Print preparation is only available for STEP format model. STL model is for viewing only. Only when printing from STEP format can you achieve the stated characteristics! An organizer for mobile storage of radio components and…

Downloads
720
Likes
236
Rating
5
P
PrintablesNicki

Brillenhalter für Sonnenblende (Auto)

Brillenhalter für die Sonnenblende. Sollte am Besten mit einem Material gedruckt werden, dass hohe Temperaturen standhalten kann (ABS, ASA, etc. PETG). PLA kann höheren Temperaturen nicht so gut standhalten. Drucken auf der Seite liegend…

Downloads
708
Likes
51
Rating
5
P
PrintablesBeusekomse Baan

Zwanenhals Wielstel / Schwanenhals Drehgestell - Spoor 1/Spur 1 (1:32)

In the first decades of the 20th century, these bogies were commonly fitted to passenger rolling stock on the European main land. These "swan neck" bogies were based on an American design. It is likely they were used all over the globe,…

Downloads
650
Likes
23
Rating
5
P
PrintablesHaui_93

Christmas Elves / Wichtel Regal - Kallax like - 11 Versionen

Regal für Weihnachtswichtel oder Puppenhäuser. 11 verschiedene Regale und 4 verschiedene Boxen.

Downloads
647
Likes
66
Rating
5
P
PrintablesStefan R

Rain Gutter Sieve / Regenrinnensieb

Very sturdy sieve. You have to measure your rain gutter drain hole and scale the model accordingly. At my house every drain hole is different because they are handcrafted. Measure the hole crosswise! The model has a circle with 90mm. The…

Downloads
640
Likes
117
Rating
5
P
PrintablesRobin Dorst

Gridfinity SMD Component Storage

Are you also tired of searching threw all the plastic bags searching the label for the right information just to find a few components? Are your boxes overflowing because the big tapes with tiny components in large plastic bags take up…

Downloads
637
Likes
111
Rating
4.9
P
Printables3DDruckByTeufel

Wago 221 Klemmenhalter für DIN Hutschienen

Diese einfache Halterung ist um die Verkabelung in meinem 3D-Drucker zu vereinfachen. Der Fokus war eine einfache und schnell zu druckende Halterung für die 221-412 Klemmen von Wago. Es ist ausgelegt für dies Klemmen kann aber in die…

Downloads
632
Likes
44
Rating
0
P
PrintablesSchweizermaker

Continental Europe Topographic Relief Puzzle

Update 2022-04-09: Additional countries now available as an add-on: https://www.thingiverse.com/thing:5341945 This is a topographic puzzle of continental Europe. Scale is 1:5'000'000 and vertical exaggeration is 10x. Small states…

Downloads
628
Likes
164
Rating
5
P
PrintablesPhilippHee

DIN Rail Switch / Hutschienen-Schalter

DIN Rail Switch A small case with a switch that can be plugged on a DIN rail. The hole for the switch has a size of 18.7 mm x 12.4 mm. Two M3 Cylinder Head Screws with a length of 6-8 mm are required to connect the two parts (case and…

Downloads
620
Likes
72
Rating
5
P
PrintablesSteveT

Filament Drybox (the best-of-the-best components)

I wanted a drybox that would keep my filament dry during the humid months and I really wanted to eliminate the MMU3 buffer that takes up tons of space and keeps feet of filament constantly exposed to the humidity. After researching this,…

Downloads
614
Likes
227
Rating
4.89
P
PrintablesVisualReversal

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Downloads
614
Likes
48
Rating
5
P
PrintablesPrint2touch

Minimalistische Mini-Tannenbäume

Diese modernen Mini-Tannenbäume sind perfekt für winterliche Deko, Weihnachtslandschaften oder als stilvolle Tischdekoration. Das Design ist schlicht, elegant und lässt sich wunderbar skalieren – ideal für minimalistische oder…

Downloads
605
Likes
116
Rating
4

Mini-tray for SMD components, version 2B

The mini-tray was designed as an alternative to the standard JEDEC tray for semiconductors. It has the same width as a JEDEC tray, but its length is a third of that of a JEDEC tray. Thus, three mini-trays lined up have the same…

Downloads
605
Likes
36
Rating
0
P
Printablesgerda

Müll Tonnen Verriegelung... garbadge can lock

Riegel zum Abschließen von Mülltonnen. Gezeichnet für Sulo 120Liter oder ähnliche wie Weber oder IUT. Nachdem die lieben Bewohner der Nachbarhäuser ihre Mülltüten bei uns entsorgt haben, musste etwas geschehen. Der Riegel wird total…

Downloads
598
Likes
34
Rating
0
P
Printablesthomas

Marble run Rails/Curves | Kugelbahn Schienen/Kurven (Gravitrax kompatibel)

Looking for straight extendable rails? This set/work is still in progress. The connector is very tight to get a stable connection between tiles and rails Most rails have walls to work even with high-speed marbles Easily printable - with…

Downloads
587
Likes
94
Rating
4.83
P
PrintablesOldman_6210

Kennzeichenhalter für einen Audi Kühlergrill

Am besten ist es den Halter aus PETG zu drucken da dieses Filament die nötige Festigkeit hat und auch flexibel genug ist die Vibrationen zu verarbeiten.

Downloads
581
Likes
14
Rating
0
P
Printablesd.kaltenberger
Downloads
576
Likes
48
Rating
5
P
Printableszicore3671

Brennenstuhl Power Strip Mount

A mounting bracket i have designed for this Brennenstuhl Powerstrip. I used 4x15mm countersunk wood screw to mount it to the underside of my desk. Print settings Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Das Filament…

Downloads
573
Likes
68
Rating
4.89
P
PrintablesDJ

Festool MFT DIY Clamp System (20mm) mit unterschiedlichen Polygonen

Festool MFT Clamp System - Spanner für 20mm Bohrungen Unterschiedliche Polygone 80° Winkel 85° Winkel 90° Winkel Die Seitenlängen der Polygone betragen 25mm, 30mm, 35mm, 40mm, 45mm und 50mm.

Downloads
563
Likes
154
Rating
5
P
PrintablesMinimaliz.me

Electronic components box

This 2-tier electronic components storage box is the ideal solution for storing and organizing your electronic components in an efficient and convenient way. It is equipped with two separate compartments for storing your spare parts,…

Downloads
563
Likes
66
Rating
5
P
PrintablesHall Precision

SingleCell 3D Printed Components | Prusa MK3S

This download contains all 3D printable components for our SingleCell enclosure. Please click here if you ordered the SingleCell MKII and need the latest files. Currently compatible with the Prusa MK3S with black and silver PSU types…

Downloads
561
Likes
46
Rating
5
P
PrintablesCaleb_3D

Bienen-/Insektentränke, Biene, Tränke, Wasserspender bee / insect drinker

Hier eine Bienen-/Insektentränke mit einem Marmeladenglas, da mir die Flaschenvarianten zu wackelig erscheinen. Das passende Glas hat eine Öffnung von ca. 77,5 mm - diese gibt es ja in unterschiedlichen Höhen, siehe Fotos. Gedruckt habe…

Downloads
553
Likes
41
Rating
5
P
Printables8mask

Govee Permanent Outdoor Light Pro Mounting Bracket

Slight modification to the narrow mount introduced by Gelap with removal of two of the corners so there are only two mounting holes. Added two alternative versions for mounting the junction between light strings. One with just a single…

Downloads
542
Likes
43
Rating
5
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Uebergang mit Schranke / BRIO Thomas IKEA eBay kompatibel

Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words had updated the file because of better fit and more stable works fine my son love to open and close it :-) Category: Mechanical Toys

Downloads
536
Likes
81
Rating
4.88
P
PrintablesGetahobbie

Hex wall - smaller components

Prints just like the original and has thin walls around the perimeter so that it fits together seamlessly

Downloads
529
Likes
140
Rating
5
P
PrintablesHaloz

1/10 Scale Miniature PC (With Internal Components)

A very small pc with internal components.

Downloads
517
Likes
257
Rating
5

Modular Organizer Box with Drawer - Small components

This is summary for the other models of Box with drawers in one place where it will be more easy to update the files, for the moment I will not delete the single models. Existing separate models (soon will be deleted)…

Downloads
510
Likes
103
Rating
5
P

Update: Düse für Solarbrunnen / Nozzle for solar fountain

31.07.24 Update: thicker stem (4 walls at 100% infill) // dickerer Stiel Update: the new nozzle (18cm) looks like a flower :) Nozzle for solar fountain with 8mm outlet (mini fountain for balcony, terrace or similar). My wife wanted a…

Downloads
508
Likes
47
Rating
5
P
PrintablesMiniCity

Eight Prominent Buildings

Here are four meshes of eight world-renowned buildings: Great Pyramid of Giza 481' / 147m (originally) Original creation https://en.wikipedia.org/wiki/Great_Pyramid_of_Giza Eiffel Tower 984' / 300m https://www.thingiverse.com/thing:22051…

Downloads
503
Likes
76
Rating
0
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Verbindung Bone / BRIO Thomas IKEA eBay kompatibel

use for connect to rails / tracks use for normal connection the dog-bone.stl i have some wooden tracks with bigger holes for that ones i use dog-bone-big.stl have fun :-) Category: Construction Toys

Downloads
498
Likes
44
Rating
5
P
Printablestsbrownie

USA States Map (Continental)

Map of the continental states of the USA. Printing: I did not use any support. Printed solid. PLA+ at 215C. Bed 66C. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: eSun…

Downloads
472
Likes
56
Rating
5
P
PrintablesNenter

Radxa Zero 3E case by Nenter

Simple case for the Radxa Zero3E. This is my first ever 3D design. I made 2 bases and 2 tops. The bases have two options: One with all usb and micro-HDMI connections and another with just the usb-c to power the thing for preset tasks. For…

Downloads
472
Likes
26
Rating
0
P
PrintablesExtrudi

Paracord, Rope / Line Tensioner ( Seil / Leinen - Spanner)

I was searching for a solid tensioner for my clothesline in the basement room but didn't find a thing i like. So i created one witch meets my expectations. This little thing is very easy to print and tensions ropes and lines for camping,…

Downloads
469
Likes
234
Rating
5
P
PrintablesHeavyMetalGuy

Brennenstuhl powerstrip mount (wall/underdesk)

Mount for Brennenstuhl powerstrips

Downloads
465
Likes
68
Rating
5
P
PrintablesJace1969

Echo Helmet Bad Batch Components MKII

This is my attempt too separate this characters Helmet into components. Which was challenging to say the least. As a self taught hobbyist. I can't say this is correct by any means. but it was all I could come up with. Sizing looks spot…

Downloads
464
Likes
118
Rating
0
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Kreuzung Gerade / BRIO Thomas IKEA eBay kompatibel

Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys

Downloads
464
Likes
92
Rating
5
P
Printablessmuk3d

Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Kreuzung Gerade und Kurve / BRIO Thomas IKEA eBay kompatibel

Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys

Downloads
462
Likes
80
Rating
5
P
Printablesedmanderl

Halter Stecker Winkelkupplung Brennenstuhl Garant CEE Camping Kabeltrommel HOLDER

Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…

Downloads
455
Likes
41
Rating
5

Cable Brackets for Brennenstuhl EcoLine Extension

A pair of these brackets lets you fix the Brennenstuhl EcoLine 6x extension cable to the underside of your desk. Make sure to push up against the extension cable when removing the plugs. Print with PETG, PLA or other filament.

Downloads
451
Likes
62
Rating
4.89