Counting matching models…
A simple holder to mount my Netatmo Rain Gauge to a flat wooden pole. Printed with PETG for UV resistance and 100% infill for stability (might be not necessary). Paint on Support below the plate (see gcode file)
Internal diameter of slope should be 45mm or so. I've made a hole for the hot melt inset nut (M4) just to keep it in place. I recommend to use the PETG filament, 4 perimeters and 40% infill.
Nachdem der Netatmo Windmesser nur mit einer ¼ Zoll Schraube befestigt werden kann habe ich nach einer Möglichkeit gesucht um diesen auch auf Oberflächen befestigen zu können. Ich habe mir hierzu diese ¼ Zoll Schrauben von Amazon bestellt…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Halterung für das Innenmodul der Netatmo Wetterstation. Drucken: PLA Keine Stützen 15% Infill Montage: Halterung an Wand montieren Stecker durch seitliche Öffnung führen Stecker soweit nach hinten ziehen, dass Netatmo von oben in die…
Simple enclosure for the Netatmo outdoor sensor module. Printed with PETG onto an Ender 3. No supports needed.
I made cover for my netatmo outdoor module, this can be printed without supports. Just insert outdoormodule between two halfs, screw in stand and then top.
Cache Netatmo module extérieur A imprimer en PLA de couleur claire en 0,2mm sans support : 1x base 3x ElementIntermédiaire 1x chapeau A assembler avec un fluide gras (huile alimentaire)
A bracket to attach the Netatmo rain gauge to a pole via cable tie. Printed on a Prusa MINI. Eine Halterung, um den Netatmo Regenmesser per Kabelbinder an einer Stange zu befestigen. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Description The original Danfoss RA-N Adapter which come in the box which each Smart Netatmo Radiator Thermostat is complete crap. It does not fit properly, does not keep the thermostat in place reliably and the thread keeps failing. This…
The Netatmo outdoor module is supposed to be placed in a shady place with sufficient air flow for accurate readings. Ideally, it is placed high above the ground and not too close to buildings. However, it's not always easy to find a spot…
This is an edge for italian 503 wall box to fix a Netatmo thermostat. Questo è un bordo per scatola da parete 503 italiana per fissare a parete un termostato Netatmo. Print instructions Nodzle: 0.6 mm Resolution: 0.3mm Infill: 100%…
This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…
The original model was very nice, but I decided to beef up all of the parts for a little extra strength which may or may not have been necessary. The following changes were made: 1) Beefed up the top and bottom rings, the pillars, and the…
Holder for Netatmo Wind Gauge for pole mount (diameter of pole is 4 cm). Designed with holes for plastic ties. At bottom is a hole for securing gauge with screw - same size as for camera tripods. I dismounted screw form some cheap small…
Printable without supports, prefarable in white material (PETG) Should be sufficient for reliable shielding of sun. Lots of vents that no heated air could accumulate. Glue together with superglue or with soemthing like UHU-Foam. (at least…
This guard prevents birds from resting on the gauge, thus, keeping it clean. I've printed this with 100% infill in order to give the spires strength, however, they are still rather delicate.
I had to revisit this adapter https://www.thingiverse.com/thing:4022121 for Caleffi valves. With my valves it is difficult to grip the thermostatic head and a couple of times the valve has fallen from the radiator. To mount it on the…
Mount for Netatmo rain or wind gauge. You will need 1/4"UNC-20x1/2" (12mm) HEX stainless steel bolt (thread as in camera tripod). I used ASA because it is UV and weather resistant. Fusion 360 file included. Gcode is for Prusa i3 MK3S.…
Is your Netatmo Presence camera not a fan of sunbathing? Neither was mine—until one overheated and took an unscheduled break! That’s why I designed this Weather Cover to keep it cool, shady, and in tip-top shape. Perfect for preventing…
The plug on top of my Netatmo rain gauge broke and I designed a new one. I printed mine Prusament PC Blend but you can print it also in PETG. I do not recommend using PLA.
Created my own attachment arm to attach the Netatmo Sunshield to my brick wall.
Afin de pourvoir positionner le module principal de chez netatmo n'importe ou sur un mur; voici un support a fixer . 2 vis a placo suffisent largement vu le faible poids. passage du câble d alimentation par l’arrière. Il est possibilité…
Just a simple two part wall mount for a Netatmo module. Basically you need to print the holder and the mount and afterwards glue those things together. Apply some strong and water-resistant double-sided tape on the back of the mount and…
A holder to mount the Netatmo Rain Gauge to a flat surface, such as a wooden handrail. Use PETG or ASA for UV resistance. No supports needed. Print with 4 walls for better strength.
Pin für den Regensensor, auch in einer Supportfreien Variante
The first goal of this multipart model is to provide a support for outdoor Netatmo module, to be stick to window or any flat surface. I personally use 3M VHB transparent double sided tape for that purpose. There is two sun shield /weather…
The model consists of several 3D-printed parts to print and assemble using the included instructions. You have to add screws and nuts by yourself. See the types in the PDF file (instructions)
This is a simple holder for the Netatmo Rain Gauge. There is also a hole for a small screw to fix the mount in position. The distance of the clamp is 12.5 mm.
This guard prevents birds from resting on the gauge, thus, keeping it clean. I've printed this with 100% infill in order to give the spires strength, however, they are still rather delicate.
Adaptor supplied (M28x1.5) were too short for my radiator. Printed in PETG 0.2mm
I wanted to replace my old thermostat and mount Netatmo on the same place, using same screws. So this mount has two screw holes (84 mm distance), it holds Netatmo thermostat and allows to change temperature by pressing top/bottom. Lover…
Passend für: Netatmo Türkammera Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Category: Camera
This is my Netatmo corner mounting. Netatmo Eckwinkel Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0,2mm Infill: 20 Filament: Eryone PLA Marble Category: Household
Simple Netatmo “anti wind” holder. Fits tight - holds fine. Possible to print without supports. I printed model with 0.8 nozzle (to test speed with this diameter) from Prusa PETG. But should work well with any nozzle diameter and all…
Hello! This is a basic model to hold a Netatmo wind gauge, very easy to print and to install. The gauge bottom won't be in permanent contact with water to preserve the device. Don't hesitate to contact me if needed, Cheeers
This is the Wall mount Holder for Netatmo Welcome. Use the KABEBIJIN bracket. See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/924 ) Print instructions Category: Camera Print…
This holder allows to fasten the Netatmo Wind Gauge securely to a guardrail using zip ties. It's designed for a guardrail with bars measuring 41x9 mm. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes…
I wanted to install my Netatmo Presence camera using an existing power cable from a previous flood light but the base of the camera only supports putting the camera directly on top of the power cable or junction box for obvious security…
Netatmo Smart Video Doorbell (mount + cover for wires) The doorbell requires the wires coming straight from the wall into the case. If the wires are on the surface on the wall, e. g. if the doorbell is displaced, then this mount can be…
This holder allows to fasten the Netatmo Rain Gauge securely to a guardrail using zip ties. It's designed for a guardrail with bars measuring 41x9 mm. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes…
Netatmo Anemometer Bracket Here's a bracket to mount the Netatmo Anemometer on a pole. The bracket is split in two, left and right and there is an STL file here for each one. Two pole sizes are provided 20m and 25mm. The fixings needed…
I used this mount to mount my Netatmo Wind Meter (Netatmo Windmesser NWA01-WW, 16 cm) and my Netatmo Rain Gauge (Netatmo Regenmesser NRG01-WW) to my fence. Might be not the best position for the wind meter, but thats okay for now. Printed…
I lost the cover for our doobell while rennovating the house. So I made a better one. I modeled it in a Twitch stream. I you want to follow me on Twitch for more 3D modeling and printing content (in German) feel free to follow along.…
When I got my Netatmo wind gauge I immediately wanted to mount it. So I just drilled a hole in the standard top cap of my flagpole, put a screw in and put the wind gauge on top of it. This ‘solution’ worked for a while, but it looked…
Thread adapter Netatmo smart radiator thermostat (32 mm) / RAVL radiator (26 mm) with threads. 2 different heights, 9 and 15 mm with and without a side slot. Netatmo_26_32_inside_thread_v4_full_circle.stl is a custom fit for my radiators…
When I upgraded to my Netatmo heating thermostat a couple of years ago, I was stuck with a problem that might affect others: My original hard wired thermostat used a standard UK wall box (pattress) for its mounting. The Netatmo relay is…
Printed in PLA. No support needed. I fixed it with Blu Tack. Made for Netatmo Anemometer (GTIN 03700730500227).
Easy-to-print holder for the Netatmo rain gauge. Is only plugged together - possibly glued - and can then be plugged onto a 30mm tube. A standard camera screw with 1/4" thread (length approx. 11 - 15mm) is required to attach the rain…
Mount for Netatmo rain or wind gauge. It can be attached to a square railing with cable ties.
My colleague needed to mount his Netatmo Presence Camera upside down due to clearance to on overhead light. Unfortunately rain & cold weather led to an broken SD Slot, as water gathered in the exposed Slot and freezed in winter. As a…
I created new model from the scratch, but I was inspired by the original version. Protrusion tabs are more strong and it has better fit to my anenometer. Printed with PETG, but PLA will work as well. 0.2mm, without supports.
Cover for the Netatmo Welcome camera for those who also do not like the original design of the camera. When you turn the cover you can also block the camera lense with it for more privacy when the camera is not supposed to be used. The…
Netatmo Webcam Welcome and Health coach light support
ENG Just a redesign of a mount wall for Netatmo devices (Welcome, Weather station, AirCare, etc) If you like it and you want to support my work, please donate here: https://paypal.me/StefanoUnga ITA Ho ridisegnato un supporto a muro per i…
I liked the original by DD3D, but you can route the cable only in one direction. In this model you can route the power cable in all 4 directions. You must only remove the cover on that site you want.
Cover for the Netatmo Welcome camera. When you turn the cover you can also block the camera lense with it for more security in privacy when the camera is not supposed to be used. Simple and quick to print and fits well on top of the…
Vogelschutz mit Spikes auch in der Mitte
Support Netatmo pour pluviomètre ou anémomètre Pour toit plat A imprimer en PLA en 0,2mm, sans couche supérieure et inférieure pour l'évacuation de l'eau de pluie, sans support Mount for Netatmo wind or gauge. Print it in PLA en 0,2mm…
a simple holder for the external sensor of NetAtmo
Can be printed without supports
A privacy cover for the Netatmo Security Camera. Needed one for a reason and didn’t want to have to turn it off. Print at 101% scale. I have yet to change the dimensions.
Netatmo Smart Smoke Alarm spool holder for Creality Ender 3 S1. Category: 3D Printing
Here's a mount for a Netatmo rain gauge which enables it to be mounted onto a flat outdoor surface. If the surface is not porous, print four of the shims to elevate the mount sufficiently to allow the waste water to escape. You will need…
Support pour Thermostat Netatmo Facilitez l'installation de votre thermostat Netatmo grâce à ce support parfaitement adapté. Simple à imprimer et à fixer, il vous permet de poser votre thermostat sur un mur ou une surface plane avec…
You can use this alternative module for Netatmo valve if you want to power your Netatmo valves by wire instead of batteries. Valve front cover model is in my other printables.
This is a corner mount for the Netatmo anemometer. You can use this if you cant easily access your rooftop or have no way of mounting it there. While mounting it directly next to a wall isn't optimal either this should work fairly well.…
Netatmo Wetterstation Halterung für Dachrinnen. Benötigt wird: 1x Druckdatei 4x Kabelbinder My printing settings: I recommend printing in PETG or PLA Nozzle: 0,4mm layer height: 0.2 perimeters: 3 infil: 15% no support
A case for netatmo weather statione and healthy home coach. The little ring locks the case in position. 0.2mm layer height seam position back sparse infill density 100% print in position like shown upside down
English: This is a holder for the outdoor module of the Netatmo weather station. With this holder, the module can be mounted horizontally, but a slightly angled installation is also possible depending on the local conditions. The holder…
Designed with PC Blend in mind, but it is seriously overbuilt and PETG should work just as well. Meant to be compatible with: https://www.printables.com/model/781014-netatmo-sunshield-remix
Grommet/stand for Netatmo Healthy Home Coach, modified design of standard cable grommet 60 mm hole diameter
Build a small display for Netamo weather station: https://github.com/zahumenskyduri/netatmo And needed a case for it. Remixed the model, it needs support for screw holes. Pi and display can be mounted with hardware delivered with the…
Mount Netatmo Wind Gauge or any other device with 1/4" on hexagonal pole (46mm diameter)
Sun shield for outdoor module that sits on top of the module, which may already have a mount.
Netatmo Wind meter 95x95mm pole holder
The original part became brittle and broke when I was disassembling it to clean the contacts for the batteries. New is modeled in Freecad and available for modification. The model has two M3 inserts based on CNC kitchens inserts. You need…
The plug on top of my Netatmo rain gauge broke and I designed a new one. I printed mine Prusament PC Blend but you can print it also in PETG. I do not recommend using PLA.
Is your Netatmo Presence camera not a fan of sunbathing? Neither was mine—until one overheated and took an unscheduled break! That’s why I designed this Weather Cover to keep it cool, shady, and in tip-top shape. Perfect for preventing…
Original Netatmo wall mounting plate comes in white-grey colour and it's quite big. Because I wanted something minimalist, I “designed” this in tinkercad. :-) Print with 0,4mm nozzle, height 0,2mm
Support mural pour caméra ronde Netatmo avec un design en forme d’alvéole, permettant une impression rapide et économique. Imprimable en PLA pour l’intérieur, mais privilégiez l’ABS ou le PETG pour l’extérieur. Aucun support requis pour…
Lets you add 5x magnet for more placement options. https://www.prusa3d.com/product/set-of-magnets-8pcs/
NETATMO plate for built-in box center-distance 60mm. During printing, add a pause at 3.40mm to insert M3 nuts. To mount in wall, add 2 screws M3 to fix this part. After that, add 2 or 4 screws M3x6 to attach original bottom plate to this…
This front cover is suitable if you want to power your Netatmo valves with wires instead of batteries. You can find a battery replacement module in my other printables.
Netatmo Unit Holder – designed for attaching to cupboards or similar surfaces using double-sided tape, or alternatively, a second version allows for hidden screws. Printed with 15% infill in PETG.
Netatmo unit holder 2 with open or hidden holes for attachment. Printed with PETG, 15% infill, no supports.
this model is for Netatmo Welcome and have access to the cables on the back of the camera. gives an angle of 30 degree and comes with a large hole for wall screws. I suggest to print it in PETG, 0.16 quality , 3 walls , 30% infill, add…
This holder is designed specifically for the Netatmo outdoor module. It allows for easy and flexible mounting using Velcro straps – perfect for attaching to round or square posts, railings, or poles. There is a Model with flat backside…
A mount for the Netatmo outdoor module that holds the sensor up by hooking into its recessed mounting hole.
This is a basic connector for you to use to create a mount or similar for a NSC01. (These STLs are useless unless you build something for them - they are posted to get you started/ as samples) There are two STLs: a simple ring so you can…
A little wedge that fits behind the Netatmo camera and prevents it from dropping over time. Can be a bit hard to insert. Slide it into place at an angle. Only works if your camera is at the same angle as mine I'm afraid.
Un support pour fixer l'anémomètre Netatmo à un poteau (tube de ⌀ 25 mm) via des serre-câbles. Imprimé sur une Creality K2. Résolution : 0,2 Remplissage: 25% Filament : ASA Winkle
This mount wil fit for Netatmo weather station, netatmo welcome , smart in door module Print Settings Printer: Ender 3 v2 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Amazon Basic PLA Category: Camera
Netatmo Welcome camera has a pretty loose power supply microUSB connector and my cats used to unplug it every time they walked behind the camera. So I designed a simple holder to fix this issue. Make sure your microUSB cable is the same…
This small cap was the last of it's kind in my collection after I switched all of my regulators on my radiators in the house. The plumber then switched the valve and all of a sudden the netatmo regulator could not calibrate anymore and…
Simple wall mount for Netatmo sensors or anything else with a round base with a diameter of 45mm. Prints in 3 parts, uses french cleat system to hide wall mounting holes. Use super glue to assemble upper and lower part.
Remixed from https://www.thingiverse.com/thing:2822754/files and https://www.thingiverse.com/thing:1635934/files Thanks maciii and denisvic
