Counting matching models…
This is a Bahtinov mask ( Wikipedia ) for Celestron NexStar 127SLT which makes it easier to focus the telescope for the clearest image. This is especially important for astrophotography. The face of this mask was created with this online…
A adaption of https://www.thingiverse.com/thing:160391 Bahtinov Mask Generator by https://www.thingiverse.com/brentb I removed the handle (which will break) and replaced it with a ring around the center and set the defaults for a…
Designed for a Celestron Nexstar 130 SLT but should work on most motorized bases of the same model.
Bhatinov Filter for Celestron NexStar 6SE created using Bhatinov Mask Drawings Generator
This mask fits neatly inside a NexStar 6 Evolution and is easy to remove. Focusing works like a charm with an astro camera, takes out the guess work of lucky imaging. I've created the shape on this site:…
I have designed this bracket to fit on the back of the Celestron Nexstar 6SE, to allow for a dovetail to be mounted on the back of the telescope. This allows for a guidescope or any other scope with a dovetail hotshoe. I printed this in:…
This part seems to be easy to break especially if you carry it around without a protective hard case. I did it based on original measures but simplified compared to the original. So there is no weight reductive cutoffs etc. Made in…
Fits onto a 11mm Rail such as laser guider. required hardware: M4 Screw x2 (10mm) M4 bolt x2 M3 Screw x6 (15-25mm long)
This is not going to be something that is downloaded by probably anyone, but I wanted to share just in case. I am using a Celestron Nexstar 6SE scope with the Hyperstar Mirror attached from Starizona, and connected to the Hyperstar is a…
Remix of Tom_DD's "5.25" DVD/Blu-Ray Drive Enclosure/Sleeve" to accommodate a Vantec NexStar USB 3.0 to SATA 6Gbps Optical/Storage Adapter. Full and Bottom sections modified, Top part is the same as original but included for completeness.…
A 3d-printable dust cover for the 6" Celestron NexStar Evolution 6 (very similar to 6SE I believe) telescope, in three flavours: Cover with no decorations Cover with decorations: Saturn on the bottom (exterior), and a star on the top…
!!!! WARNING !!!! Using a telescope to look at the sun can be very dangerous, ALWAYS CHECK YOUR FILM BEFORE VIEWING!!!! And furthermore, be careful when aiming your telescope. Working on a solar pointer, but I use the shadow of the…
This is a adapter fitting the tripod 2" eyepiece holes of a Celestron NexStar 4SE. With this it is possible to use the two 2" holes also for 1,25" eyepieces. I highly recommend to print this with PETG as it is more flexible and durable.…
This is a tripod adapter for a Celestron Nexstar altaz goto telescope mount that I picked up used for cheap. This requires just two pieces of hardware, just a quarter inch screw to connect to the mount, and a 3/4" t-nut to allow it to…
This is a 'snap in' housing for a replacement LCD on a Clestron Nexstar Telescope hand controller. This description should appear on Mike Swanson's Nexstar website soon. https://www.nexstarsite.com/NUG.htm I cannot support the design over…
A quick remix of the awesome work done by PapaSpiro to fit the NexStar 6SE. I've included a small test model so that you can see if the bolt pattern lines up with your mounting holes. UPDATED: I was running into issues with the 28BYJ…
I created this model to be used with 6"x6" solar film sheets that can be purchased on amazon. The only other required pieces are: 4 Heat Set Threaded Inserts (M3) 4 M3x12 Screws I've also included a carry case that protects the film when…
Picking the hobby back up again after a few years, I noticed that my dew shield wouldn't stay round so I decided to print a simple stiffener ring to make sure it held its shape. As a bonus, I designed in a small lip so the original…
If you find my designs useful, please consider sending a tip Tripod Leg Holder to fit 38mm / 1.5" tripods like the Celestron Evolution tripod Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
Remixed the original file by Spuddy at MakerWorld to reduce the wall height on the left side, so you can still easily grip the mount handle without crippling your hand. I assume the Celestron Nexstar Evolution Mount is the same dimensions…
I'm uploading a few models that I've made myself because I could not find or was not completely happy with what I could find online. This is a Bahtinov mask for a Nexstar 130SLT. I created the design after finding a couple online that…
A quick remix of the awesome work done by PapaSpiro to fit the NexStar 6SE. I've included a small test model so that you can see if the bolt pattern lines up with your mounting holes. UPDATED: I was running into issues with the 28BYJ…
Picking the hobby back up again after a few years, I noticed that my dew shield wouldn't stay round so I decided to print a simple stiffener ring to make sure it held its shape. As a bonus, I designed in a small lip so the original…
This mount allows you to use a Nexstar Goto Tripod like a normal scope tripod with a 3/8 conenction. Only requires drilling bottom hole slightly larger to fit a 2" 3/8 hex bolt. Print Settings Printer Brand: Creality Printer: Ender-6…
A solar filter for a Celestron Nexstar 5SE (Inner diameter is 153mm) Get a sheet of Baader Planetarium AstroSolar solar filter 20 x 29 cm. After printing you'll only need to sand a possible flatfoot of the inner ring. Draw and cut is a…
This is a pair of "J" hooks designed to let you get your precious telescope off the floor, and safely mounted to the call. It also includes 2 spacers that get the hooks off the wall so the telescope hangs better. You'll need four 3.5" or…
Solar filter for Celestron Nexstar 6SE 3D printed parts STL file Material Filter holder Solar_Filter_Nexstar6SE_Filter_holder.stl ASA or ABS Filter cap Solar_Filter_Nexstar6SE_Cap.stl ASA, ABS or PETG Inner ring…
This mount allows you to use a Nexstar Goto Tripod like a normal scope tripod with a 3/8 conenction. Only requires drilling bottom hole slightly larger to fit a 2" 3/8 hex bolt. Print Settings Printer Brand: Creality Printer: Ender-6…
