Search results: niimbot

Counting matching models…

Printables

Gridfinity Niimbot tray

Gridfinity 3x3x4 tray for holding a Niimbot D110 and two roles of labels.

Order a print of this model

Printables

Plant tag for Niimbot stickers

Simple plant tag for Niimbot 12x40 stickers.

Order a print of this model

Printables

Niimbot N1 Gridfinity Organizer

A simple holder for the Niimbot N1 labeller, 6 ribbon cartridges, and 8 rolls of label stock, built onto a Gridfinity 4x5x5 base. Notes: The included pictures of my print show some "extra" geometry at the bottom of the middle pocket for…

Order a print of this model

Printables

Gridfinity Holder for Niimbot D11

This is a Gridfinity-compatible holder for the Niimbot D11 label printer. The model comes in two sizes: 3.5×1 (because my grid have 0,5 cells on the edge) 4×1 (standard) so you can choose what fits your Gridfinity setup best. The holder…

Order a print of this model

Printables

Gridfinity Holder for Niimbot B1

A gridfinty 4x4 holder for Niimbot B1 label printer and 3 spare label rolls. I got the outline of the printer from tooltrace.ai and remixed. Printed in PLA at 0.3 layer height and 10% infill.

Order a print of this model

Printables

HCW Niimbot B1

Remixed a wallmount for the Niimbot B1 to make it mountable to a Honeycomb storage wall

Order a print of this model

Printables

Niimbot D11 Honeycomb Storage Wall

A remix that allows the Niimbot D11 label printer to be stored on the Honeycomb Storage Wall

Order a print of this model

Printables

Niimbot D11 insert for Miniware DS213 Case

I wanted to put my D11 into a rugged case so this is the insert to make that happen.

Order a print of this model

Printables

Niimbot D110 Label Printer Holder

Includes files for wall mounted and desktop version. Wall mount holes 40mm spacing. No supports needed, print on base as pictured.

Order a print of this model

Printables

Key Tag for NIIMBOT 14mm x 30mm Label

Simple and quick print to use the NIIMBOT labels for key organization. Designed it specifically for the Transparent 14mm x 30mm labels but can work with anything smaller.

Order a print of this model

Printables

niimbot D110M Skadis Holder

This is ikea skadis holder for Niimbot D110M label printer. The D110M( D110_M ) released in 2024 has a smaller size than original D110. It can access the button without removing it from the holder.

Order a print of this model

Printables

Rugged Box Inlay für Niimbot D101

Ich war von der ursprünglichen Box so begeistert,dass ich das Inlay für den Niimbot D101 angepasst habe. Danke an den Ersteller https://www.printables.com/model/691582-rugged-box-mit-inlay-niimbot-d11

Order a print of this model

Printables

NIIMBOT D110 Label Maker Holder for Skadis Pegboard

NIIMBOT D110 Label Maker Holder for IKEA Skadis Pegboards Print with supports for the pegboard hooks. Note: Print in my photo failed 75% into the print, but I decided to just use it to be eco-friendly.

Order a print of this model

Printables

Niimbot D101 tray for Multiboard

Includes slot to store the divider when not in use.

Order a print of this model

Printables

Niimbot label case with finger holes

Case for the small Niimbot thermal labels. With convenient finger holes to pull out the rolls. The lid has a slight interference fit, allowing to pick up the case without the lid opening. If the lid is too tight, open and close it a few…

Order a print of this model

Printables

Niimbot D101 Adhesive Holster

While I love the Niimbot D101 label maker, it's a little too bulky for me to dedicate any space in my Gridfinity or Honeycomb Storage Wall systems. Instead, I decided to use some space on the side of one of my IKEA drawer units by making…

Order a print of this model

Printables

Niimbot D11 Label Holder

Had some loose Labels for my Niimbot D11 lying around and wanted to organize them. So I quickly modeled this stand for the standard labels. They all fit pretty nice. Holds up to 6 Labels. Printed lying down without any support.

Order a print of this model

Printables

NIIMBOT D11 Holder for Skadis

After being frustrated at the lack of SKADIS options that fit my version of the NIIMBOT D11 thermal printer, I ended up remixing the closest model I found to what I was looking for (see link for the original author's model). The issue is…

Order a print of this model

Printables

Niimbot D110 label stand

Small stand for T14*40 labels from Niimbot D110 printer. Ideal for small displays, market stands. Not sure if other labels will fit. Print as print file and no supported needed

Order a print of this model

Printables

NIIMBOT B1 Label printer wall holder

little support needed to copy round shape

Order a print of this model

Printables

NIIMBOT label rolls holder

variants with size description and empty one

Order a print of this model

Printables

Multiboard Niimbot D110 Holder

Mount designed for the Niimbot D110 label printer, made compatible with the Multiboard PushFit system. This version is compatible with the 2021 (i think) model of the D110 (approx. 77 mm length). Check yours before printing. Supports are…

Order a print of this model

Printables

Gridfinity Niimbot D110 (new version)

Gridfinity for the new version of the Niimbot D110 (M). Two versions : Horizontal (3x1) Vertical (2x1)

Order a print of this model

Printables

Gridfinity Niimbot tray

Gridfinity 3x3x4 tray for holding a Niimbot D110 and two roles of labels.

Order a print of this model

Printables

Plant tag for Niimbot stickers

Simple plant tag for Niimbot 12x40 stickers.

Order a print of this model

Printables

Gridfinity Holder for Niimbot B1 Label Maker

This model is a Gridfinity storage unit built to securely hold the Niimbot B1 label maker . Gridfinity Standard: Designed for the 42×42 mm base unit grid. Custom Fit: Shaped to match the Niimbot B1 form factor for a snug and secure fit.…

Order a print of this model

Printables

Niimbot Etikettenbox Groß / Box for Niimbot Labels large

Box um die Etikettenrollen des Niimbot Druckers zu lagern. Den Deckel habe ich mit 2mm Passstiften an der Box befestigt. In beiden Teilen sind Löcher, Ihr könnt den Druck pausieren und 3x3x3m Magnete einsetzen, damit der Deckel…

Order a print of this model

Printables

Niimbot Etikettenbox klein/ Box for Niimbot Labels small

Box um die Etikettenrollen des Niimbot Druckers zu lagern. Breite 125mm. Den Deckel habe ich mit 2mm Passstiften an der Box befestigt. In beiden Teilen sind Löcher, Ihr könnt den Druck pausieren und 3x3x3m Magnete einsetzen, damit der…

Order a print of this model

Printables

Niimbot D110 Label Printer Holder for Ikea Skadis (Ultimount Hook)

This holder takes a Niimbot D110 label printer and mounts perpendicularly to an Ikea Skadis board to minimise footprint, using 2 of @davidmakes 's great Skadis Ultimount hooks . Allows full access to the power button, label printing (face…

Order a print of this model

Printables

Niimbot D110 Gürtelhalter

Das Teil ist zweiteilig und kann nach dem Druck zusammen geklebt werden. Die Box ist “snack tight”, der D110 passt saugend in die Box. Zum entnehmen den Niimbot öffnen und am Deckel herausziehen.

Order a print of this model

Printables

Gridfinity Niimbot D11-H

Gridfinity holder for the Niimbot D11-H printer Non-magnet (magent version coming) Includes finger groove for easy access 3x3 Gridfinity base

Order a print of this model

Printables

Niimbot N1 Gridfinity Organizer

Order a print of this model

Printables

Hexagonal tubs with lids and stand for Niimbot labels

Hexagonal tubs with lids and stand for Niimbot labels. Obviously can be used for any other purpose too, but designed with label storage in mind. Lid slides onto base and does not lock into any specific height allowing the same model to be…

Order a print of this model

Printables

Niimbot D110_M Gridfinity Tray

Gridfinity 3x2 box to store a Niimbot D110_M label printer flat. It fits into e.g. IKEA alex drawers. Test fitted with D110_M , other D110 gridfinity boxes where to big. The design has a small cutout for the print port ensures a perfect…

Order a print of this model

Printables

Gridfinity Holder for Niimbot D11

Order a print of this model

Printables

Niimbot D110 Holder for IKEA Skadis (Secure 3-Prong Mount)

This is a custom-designed holder for the Niimbot D110 label printer, made specifically for the IKEA Skadis pegboard system. It solves the common issue of loose pegboard accessories by using a reinforced mounting design. Features Solid…

Order a print of this model

Printables

Gridfinity Niimbot D101 Label Maker Holder

Just a simple 3x4 Gridfinity bin to hold a Niimbot D101 Label Printer and several spools of labels. This DOES fit in the shallower IKEA ALEX drawers, which was a main requirement for me. I know this printer can use the wider spools, but I…

Order a print of this model

Printables

Niimbot B1 Thermal Label Printer Box

Rugged box to hold the Niimbot B1 thermal label printer, the supplied USB-C cable, and at least 3 rolls of labels (including one in the printer). 6x M3x30 are required for assembly as per the original design, however slightly longer bolts…

Order a print of this model

Printables

Gridfinity Holder for Niimbot B1

A gridfinty 4x4 holder for Niimbot B1 label printer and 3 spare label rolls. I got the outline of the printer from tooltrace.ai and remixed. Printed in PLA at 0.3 layer height and 10% infill.

Order a print of this model

Printables

Gridfinity Holder for Niimbot D11-H

Not a perfect fit, but good enough for me.

Order a print of this model

Printables

Niimbot D110 Upgraded Version Holder Gridfinity

This is a remix of Schorsch3000's remix which can be found here: https://www.printables.com/model/1036580-gridfinity-bin-for-the-upgraded-nimbot-d110 . I added 4 compartments to be able to store rolls of labels to keep everything in one…

Order a print of this model

Printables

HCW Niimbot B1

Remixed a wallmount for the Niimbot B1 to make it mountable to a Honeycomb storage wall

Order a print of this model

Printables

Niimbot Label Holders for Multiboard | 25x15, 40x30, 50x70

These are custom Niimbot label holders for the Multiboard system , designed to keep label rolls neatly stored, easy to access, and clearly visible on your board. The holders are made to suit the following label sizes: 25x15 40x30 50x70…

Order a print of this model

Printables

Making better Use of the NIIMBOT D110 Packaging

I picked up a NIIMBOT D110 label printer, which comes in a small cardboard box—nothing fancy. I figured I could make slightly more efficient use of the available space to fit a few rolls of labels alongside the printer, all while staying…

Order a print of this model

Printables

Niimbot D110_M Ikea Skadis holder

Ikea Skadis mount for Niimbot D110_M label printer. It differs from the D110 mount for the charging port position. It is possible to access the power button, print, and charge while on the stand. Printed vertical with supports in PLA, 15%…

Order a print of this model

Printables

Gridfinity Niimbot 4 Roll Holder

Four 15mm sticker rolls holder for Niimbot printers.

Order a print of this model

Printables

Niimbot Storage Organizer

Description If you are looking for a perfectly fitted storage organizer for your Niimbot D11 , this is the one! I noticed a lot of existing organizers on here were either way too bulky or were mislabeled as working for the D11 when they…

Order a print of this model

Printables

NiiMBOT D11 IKEA Skadis

NiiMBOT D11 Label Maker für IKEA Skadis NEU ! Update 24-7-2022 Version 2.0 mit Aufbewahrung des Ladekabels. siehe Bild beim Drucken im PrusaSlicer nehmt die Stützten zum aufmalen funktionieren sehr gut. NiiMBOT D11 Label Maker hier gibt…

Order a print of this model

Printables

NiiMBOT Storage D101 - Fit IKEA Alex Drawer

Storage for labels and the D101 Can store up to 17 x 15mm labels and 6 x 25mm labels. You can use the NiiMBOT 13mm (14x28 - 220pcs) round labels for identifications. It's made to fit my IKEA Alex Drawer, it's about 292mm (drawer is about…

Order a print of this model

Printables

Gridfinity Niimbot- D110 holder

link to Gridfinity Niimbot- D110 label sticker roll holder

Order a print of this model

Printables

Gridfinity Niimbot- D110 label sticker roll holder

A link to my Gridfinity Niimbot- D110 holder

Order a print of this model

Printables

Gridfinity Stackable Niimbot D110 Label Maker Holder

Gridfinity-compatible and stackable holder for a Niimbot D110 Label Maker . It allows opening and refilling the label maker without taking it out of the holder. Magnet holes have been sized slightly smaller than standard (6.2mm vs 6.5mm)…

Order a print of this model

Printables

Niimbot Label Roll Holder

Just a small rack to store your Niimbot labels. I designed it for new rolls to have a tight fit, but there are no separators since I have 2 different sizes of labels. This means that used labels will move around freely, I just squeeze…

Order a print of this model

Printables

Niimbot D101 mount

Pocket for Niimbot D101 termal printer with a slot for inside splitter. Hexagonal slots in the bottom provide access to charging port. My setup produces a decent press fit (depending on printer and slicer calibration). No glue needed. For…

Order a print of this model

Printables

Niimbot rolls mount

Simple on-wall place to store stickers rolls for Niimbot D101 or any other rolls in similar dimension. My setup produce decent press fit (depend on printer and slicer calibration). No glue needed For mounting on Uppspel board use side…

Order a print of this model

Printables

Niimbot D101 - Ikea Skadis

A Skadis holder for the Niimbot D101 Label Maker Designed from scratch in Fusion 360 but inspired by NiiMBOT D11 IKEA Skadis von Darkmoon

Order a print of this model

Printables

Niimbot label maker and extra label holder Gridfinity

A 2x3 gridfinity bin for a niimbot label maker and 3 additional rolls of labels.

Order a print of this model

Printables

Skadis Holder for Niimbot B21

There are some sophisticated Skadis holders for other Niimbot out there, but I couldn't find one for the B21. This is a simple remix of the SKÅDIS Box (OpenSCAD) from @Marco (thanks a lot) that fits the Niimbot B21 quite snug. You can…

Order a print of this model

Printables

Niimbot D101 Gridfinity

contains both stl and step file for further modification

Order a print of this model

Printables

Gridfinity Holder for Niimbot D101 Label printer

Designed a storage container for a Niimbot D101 thermal label printer in "lying" position. It also holds two additional label cartridges in their package box (12*40 in my case) as well as the USB charging cable. It fits the Gridfinity…

Order a print of this model

Printables

Organizer for Niimbot Label Rolls

I made a small organizer which fits perfectly into the D11 / D110 bag which can be bought as an accessory for the Niimbot Label Maker.

Order a print of this model

Printables

Insert for DC110 Niimbot

I made an insert for this box that help my NIIMBOT DC110 and two rolls of sticker and also the usb charger

Order a print of this model

Printables

Niimbot D110 label maker and 4x label holder Gridfinity

A 2x3 gridfinity bin for a D110 Niimbot label maker and 3 additional rolls of labels. Original model had 3 slots for labels and it was offset in a strange way (not centered). Print at 0.2mm layer height

Order a print of this model

Printables

Niimbot D110 Mount

Mount for the Niimbot D110 that gives you access to the power button, charging port and printed label without having to remove it from the mount. I originally designed it so it can be mounted flush with 1mm thick nano tape cut to size,…

Order a print of this model

Printables

NIIMBOT D11 Stand

This is a stand that allows a NIIMBOT D11 Label Printer to stand upright on your desk. For some reason the device was designed with a rounded bottom, so it cannot stand upright without a stand. The OpenSCAD file is included in case you…

Order a print of this model

Printables

Niimbot D11 Honeycomb Storage Wall

A remix that allows the Niimbot D11 label printer to be stored on the Honeycomb Storage Wall

Order a print of this model

Printables

Tischständer für NiiMBOT D11 Label Maker

NIIMBOT D11 Smartphone Label Maker Kit Bluetooth Wireless Tischständer ist für den Bürotisch gedacht damit das Gerät einen festen stand hat wenn man Labels damit ausdruckt. hier gibt es ein Video -→ Video…

Order a print of this model

Printables

Niimbot D110 spool case

I needed a small Nimbot spool case but couldn't find anything I liked, so I created one.

Order a print of this model

Printables

Niimbot D11 holder

Držák pro tiskárnu Niimbot D11

Order a print of this model

Printables

Gridfinity Niimbot D11 Label Printer Bin & Spare Label Rolls (3x4x6)

This is a 3x4x6u Gridfinity Bin for a Niimbot D11 Label Printer and three spare label rolls. Also, it's my first model... please be gentle! This remixes the Plain Bin (3x4x6) from @KyleWarren (my absolute favorite Gridfinity bins to…

Order a print of this model

Printables

Rugged Box mit Inlay Niimbot D11

Rugged Box mit Inlay für Niimbot D11 und Platz für 8 Etikette und Ladekabel. Freue mich über jede Unterstützung :)

Order a print of this model

Printables

Gridfinity Niimbot D110 1x3

Fits Niimbot D110 Label Printer, Press Fit 6x2mm magnets

Order a print of this model

Printables

Niimbot D101 Station

Aufbewahrungsstation für den Niimbot D101 inkl. Labelrollen. Der Niimbot D101 wird hier liegend aufbewahrt (Platzsparend). Die Labels können in den beiden Vertiefungen aufbewahrt werden. Es passen ungefähr 12 breite Rollen oder 22 schmale…

Order a print of this model

Printables

Ikea Skadis holder for Niimbot B3S printer

Useful holder for Niimbot B3S thermal printer to place at Ikea Skadis pegboard

Order a print of this model

Printables

Niimbot D11 label maker gridfinity

1x4 bin that can hold a Niimbot D11 label maker. I couldn't find one that was holding it in that orientation.

Order a print of this model

Printables

Niimbot D11 Gridfinity Storage

I did not find a storage solution i liked for th D11 in gridfinity. I put little felt-pads to not scratch the Labelmaker. Note: Printed in several lines and glued together to use up leftover filament. Also Did not actually measure if it…

Order a print of this model

Printables

Niimbot D110 Label Maker - Gridfinity (POSSIBLY OUT OF DATE)

Simple nestling bin for a Niimbot D110 label holder. It's a 1x3 and about 7u high if I recall. Has magnet holes, and shouldn't need any special settings from other gridfinity bins. For clarity, here's an Amazon listing for this item.…

Order a print of this model

Printables

Gridfinity holder for Niimbot D110 label printer

A simple Gridfinity 1x3 bin of 6u high for Niimbot D110 label printer ( aliexpress ). The difference between this model and others is that the chamfers make the printer fit perfectly.

Order a print of this model

Printables

Niimbot D110 holder HSW

No Supports needed

Order a print of this model

Printables

Niimbot D11 insert for Miniware DS213 Case

I wanted to put my D11 into a rugged case so this is the insert to make that happen.

Order a print of this model

Printables

Gridfinity Niimbot D11 + Labels

A gridfinity bin for the Niimbot D11 including space for 15 labels.

Order a print of this model

Printables

Niimbot D110 mount for Ikea Skadis

A IKEA Skadis holder for the Niimbot D110 Label Maker that gives you access to the power button and charging port.

Order a print of this model

Printables

Niimbot label holder for Ikea Skadis

A IKEA Skadis holder for the Niimbot Labels.

Order a print of this model

Printables

Niimbot Label Case (12-15mm or 25mm wide)

Niimbot label cases for 25mm and 12-15mm wide tapes.

Order a print of this model

Printables

Niimbot D110 Large Spool Case

A brilliant Spool case from Pawel Zawadzki - but only supported the 16mm spools - this version supports 32mm spools.

Order a print of this model

Printables

Gridfinity Niimbot D101 holder

This is the neat little bluetooth label printer I use to label my gridfinity stuff. I used the extra space so you can fit a couple slim label rolls or a single fat one.

Order a print of this model

Printables

Niimbot D110 Label Printer Holder

Includes files for wall mounted and desktop version. Wall mount holes 40mm spacing. No supports needed, print on base as pictured.

Order a print of this model

Printables

HSW Niimbot D101

Remixed holder without tray to be used with HSW

Order a print of this model

Printables

Niimbot D11 Holder - Multiboard / Multiconnect

Multiboard / MultiConnect compatible holders for the Niimbot D11 label maker. There are options for the old version as well as the newer model. Port holes on the bottom to plug 'em in. Credits to Jonathan ( KeepMaking ) for creating…

Order a print of this model

Printables

IKEA Skadis - NIIMBOT D110 Mount

How to print: 0,2 layer height 100% infill (only matters for the hooks) supports: yes (I only recommend supports for the hooks) Material: I used PLA, any other material should also work well Printing time: 40min on Bambu Lab P1P…

Order a print of this model

Printables

Multiboard Niimbot Label Storage

Multiboard / MultiConnect compatible Niimbot label storage. Works with the Niimbot D11 label makers, maybe more… The photos show the label outlines a tad bit too small. They're bigger in these models, I just didn't reprint them. Close…

Order a print of this model

Printables

NIIMBOT D110 wall mount and roll holder

I needed a wall mount for my NIIMBOT D110 and some spare holder just for glueing them into my cabinet door, so I created those models. Just print them with your favorite settings and use double sided tape to mount them wherever you like.…